Used Kumm Slurry Technology for sale (23,475)

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Ask for specification! Ppjdjw Ty Hcopfx Amier

Condition: used, Year of construction: 2017, Operational condition SPI machine. Ppjdpfxjw Ty Rbs Amior Ask for specification!

Condition: used, Year of construction: 2018, Operational unit! Pedpfxowctqbe Amispr Ask for additional information!

Condition: used, 7001481, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Model: 7001481 Type: 20 ADVANCED Condition: Used Psdpfst Txayjx Amiepr

Condition: used, 619569.0, 35-40 ADVANCED, MS Ultrasonic, ultrasonic generator Model: 619569.0 Type: 35-40 ADVANCED Condition: Used Ppodpfx Amjt Txbdjior

Condition: used, 612435.1, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Podpfx Amet Tw Sheiepr Model: 612435.1 Type: 20 ADVANCED Condition: Used

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass Podpfoua D Alsx Amijpr removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Pjdpeu Dg Uhofx Amispr Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Condition: new, Year of construction: 2024, ZŁOMIARZE Recycling Technology MCW 52/76 Shredder The MCW series quad shaft shredder is based on many years of experience in the plastics and scrap industry. MCW Shredder is a highly reliable, universal pre-shredder for shredding a wide range of materials such as plastics, materials, rubber, wires, electronic scrap, post-production waste as well as slight magnetic materials. Types of MCW Shredders: Psdpfx Aohix Hrjmiepr MCW-52 Technical Specification: • Motor output – 22 kW • Cutting Chamber – 510 × 760 mm • Performance – approx. 400 kg/h (depending of material type) • Weight – approx. 1400 kg MCW-76 Technical Specification: • Motor output – 37 kW • Cutting Chamber – 965 × 780 mm • Performance – approx. 800 kg/h (depending of material type) Additional equipment: • Loading belt conveyor • Dust Extraction • Magnetic Plate with Quick Clean System • Magnetic Separator SM-370 • Unloading Belt Conveyor Contact us for more information!

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. Ppedeiqxtbopfx Amisr If you're interested in our products, please contact us!

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 880 mm, total width: 540 mm, total height: 1,460 mm, overall weight: 210 kg, input voltage: 230 V, power: 2 kW (2.72 HP), input frequency: 5,060 Hz, Capacity: 60 single ties/min Ppodpfxewzk A Se Amijr

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Ppedpfxewmm U Us Amier

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Ppedpfx Amswhbnloisr

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Overband Magnet Type UB 600 Operating voltage 3x400 V Frequency 50 Hz Rated operating current 5 A Operating speed 30 – 90 rpm Ppsdjxy Hl Depfx Amisr Maximum sound pressure level 50 dB Machine weight 750 kg Location: Austria Available immediately

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10011575, Hello, I´m selling filling pellet machine VAI V5/10S Fully automatic, Made in Italy Low used, fully function in good condition Ppsdpfx Amjwxplmeier If you´re interested contact me on mail and we can call you

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Ppedpfjp S Tlhjx Amisr Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: 288457-290911, functionality: fully functional, Stroj je nov,nikada nije koristen Podpfx Amevp Smvjispr

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: K-89404748-10327777, type of input current: three-phase, total width: 2,134 mm, total length: 4,268 mm, total height: 2,750 mm, input voltage: 460 V, input frequency: 60 Hz, 3 phase, 460v Ppsdpev Ncmyjfx Amier (5) Washing valves, (1) Fill head Capacity: 30-90 kegs/hr (15.5gll clean and fill time: 2 mins) Compatible keg sizes: 7L to 58L (239mm to 425mm D x 320mm to 610mm H) Also compatible with disposable Petainer kegs Filling Accuracy +/- 0.19% Integrated exterior and interior washing, racking, filling, control, and exit conveyor w/ slide Requires de-install in Michigan, USA. Contact us for details!

Condition: used, Year of construction: 2022, total length: 2,020 mm, lifting height: 4,350 mm, load capacity: 1,600 kg, · Bedienung Geh/Stand · Nenntragfähigkeit 1600 (2000)kg · Lastschwerpunktabstand 600 mm · Lastabstand 724/646 mm · Achslast mit Last antriebsseitig/lastseitig 979/1850 kg · Achslast ohne Last antriebsseitig/lastseitig 962/268 kg · Bereifung Polyurethan · Reifengröße antriebsseitig mm ⌀ 230 x 90 · Reifengröße lastseitig mm ⌀ 85 x 85 (⌀ 85 x 60) · Stützrollengröße mm ⌀ 150 x 50 · Spurweite antriebsseitig/lastseitig 534// 380/500 mm · Höhe Deichselgriff in Fahrstellung min./max. 1175/1380 · mm · Gabelhöhe gesenkt mm 86 · Arbeitsgangbreite bei Palette 800 x 1200 längs 2390 / · 2777 mm · Wenderadius 1507/1894 mm · Fahrgeschwindigkeit mit/ohne Last km/h 4,0/4,0 6,0/6,0 8,0/10,0 · Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 · Senkgeschwindigkeit mit/ohne Last m/s 0,40/0,35 · Max. Steigfähigkeit kB 5 mit/ohne Last %: 10,0/22,0 · Betriebsbremse Elektromagnetisch Podpjy E Uc Rsfx Amijpr · Fahrmotor, Leistung S2 = 60 min kW 2,3 · Hubmotor, Leistung bei S3 = 15 % kW 3,2 · Batterie nach DIN 43531/35/36 A, B, C, nein 2PzS · Batteriespannung/Nennkapazität K V/Ah 24/230 · Li-Ion: 24/205 · Batteriegewicht ±5 % (herstellerabhängig) kg 212 · Energieverbrauch nach DIN EN 16796 kWh/h 0,84 · Art der Fahrsteuerung AC-Steuerung · Schalldruckpegel (Fahrerohr) dB(A) ≤66

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 CNC axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel fences with numerical adjustment with 21 drilling spindles (10 left, 11 right) Spindle spacing: 32 mm Ppodpfxslk R Epo Amisr Maximum drilling distance: 640 mm Maximum tool diameter: 40 mm Maximum drilling depth: 65 mm Maximum horizontal drilling height: 35 mm Working height: 860 mm Maximum panel thickness: 60 mm Maximum panel size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction port: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2017, total length: 2,100 mm, Warehouse technology Kärcher KM130/300RLPG Ppsdpfx Amjya Ixajisr Drive Gas Year built 2017

Condition: used, Renishaw RMP600 3D probe, SK40, including case Condition: used (functional) Psdpfxjy Dibfo Amispr

Condition: used, Renishaw RMP60 3D probe, SK40, including case Ppedpfjy Dia Uox Amior Condition: used (functional)

Condition: used, RENISHAW OMP 60 3D measuring probe SK40 Condition: Glass cover damaged, but function not affected. Pedpfx Ajy Dia Iemispr

Condition: used, Year of construction: 2010, MERLIN SK 613 Humidification System, approx. 2010 ----- Consisting of: Pjdpfxoyn R H No Amispr - 1 x Pre-filter and water softener - 1 x Water hydraulics (high-pressure pump) - 2 x Humidity sensors - 6 x Humidifier modules RG - 14 x Humidifier modules MD 1 ----- Original price was approx. €24,000 (excluding installation) (Technical specifications according to the manufacturer, without guarantee!)