Used Rss Transportbanden for sale (153)

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2026, loading space volume: 34 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Semi-Trailer STC 34 Code L4BH Chemical First Registration Ø Unladen weight: 7,580 kg Ø Stainless steel chassis, polished to a high gloss Ø BPW axles with large disc brakes, 430 mm Ø 1st axle is a lift axle Ø Crank support legs, steel, full-load capable Ø 6 tires, size 385/65 R 22.5 Ø Aluminum rims, ALCOA Dura-Bright, high gloss Ø WABCO trailer EBS with RSS (Roll Stability Support) Lrodpfxox Rtafs Akqek Ø Tank: 34,000 liters, made of stainless steel 1.4571 (AISI 316 Ti) Ø Operating pressure 3.0 bar / test pressure 4.0 bar Ø Insulation: 100 mm glass wool Ø Single compartment with 4 baffle plates Ø 5 manhole covers: 3x DN500 and 2x DN350 Ø 1 vent valve by Fort Vale Ø 1 safety valve Ø 1 check valve Ø Air line on right side, DN 50, with TW 50 connection at front right Ø Heating preparation, 4-channel hot water Ø 1 discharge outlet, DN 100 uninsulated, with sampling tap at rear right and TW 80 coupling Ø 1 emptying (cleaning) system Ø Pneumatic bottom valve Ø Hose tubes left and right, DN 150, approx. 6 m long RENTING is the new BUYING – also available from us as a full-service rental.

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth Lrodpfx Akev Dz Ixoqsk End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: new, maximum load weight: 25,160 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 1,380 mm, total width: 2,550 mm, total height: 1,410 mm, Year of construction: 2025, Equipment: ABS, Wiese Building Material Semi-Trailer Fifth-wheel load: 12,000 kg Axle load: 27,000 kg Permissible gross vehicle weight: 39,000 kg Curb weight: 10,840 kg Loading platform length: approx. 9,200 mm Overall length: approx. 10,600 mm Internal width: 2,480 mm Overall width: 2,550 mm Kingpin 1 position with 2" kingpin Coupling height In horizontal position: approx. 1,160 mm Top edge of main beam (without floor): approx. 1,380 mm Loading height: approx. 1,410 mm Lashing hole external frame D=30 mm with perforated strip at angle (160 mm high / 30 mm floor recess / 4 mm wall thickness), Main beam spacing 980 mm (center/center) - 1,130 mm (outer/outer) Axles 3 axles, each with 9,000 kg load capacity Brand: SAF with disc brakes D=430 mm Track width: 2,040 mm ABS: 1 axle sensed Axle spacing: approx. 1,510 mm / approx. 1,510 mm Suspension Original SAF air suspension, with raise/lower valve with retaining cables Axle lift Lifting axle, 1st axle, automatic load-dependent for starting assistance, controllable via push button in driver’s cab Steering Mechanical forced steering on axle 2 + 3 Two-bar steering / Manufacturer: Tridec Brake system 2-line Wabco compressed air braking system according to EU directive 71/320/EEC etc. with: EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket 1x ISO coupling head yellow 1x ISO coupling head red Spring-loaded parking brake on 2 axles all fitted with quick couplings Aluminum air reservoir Air system Compressed air installation with: 1x raise/lower valve 1x level control valve Aluminum air reservoir all fitted with quick couplings Automatic lowering of air suspension during crane operation Tires 6 units type: 385/65 R22.5" Brand: at manufacturer’s choice Tire pressure monitoring system for all 6 tires, display in driver’s cab Rims 6x steel rim 11.75x22.5", 10-hole, center-mounted, offset: 120mm Support device Mechanical landing legs with T-swivel foot, permitted lift load: 2x 12,000 kg Operable from one side, two speeds Brand: at manufacturer’s choice Wheel covers & mud flaps 6x plastic half-shell wheel covers Mudguard mounting reinforced with flat steel Note: mudguard on steered axle 3 with internal cutout Lrjdpfx Aksyihg Hsqok Lighting system 24V lighting system according to EU directive 76/756/EEC etc. with: 2x multi-chamber tail lamps Lane marker lamps License plate lighting LED side marker lamps with indicator function 2x 7-pin and 1x 15-pin connector installed as per EU standard Tail lights mounted in reinforced light carrier = certified rear underrun protection All necessary markings Additional installation: Electrical connection for crane control pre-installed as specified! Safety equipment Side underrun protection and rear underrun protection in aluminum according to EU directives Floor OKULEN floor 32 mm Superstructure Straight front wall, 1,200 mm high, welded solid, consisting of 4x steel profiles, welded to the front plate with aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading Straight rear wall, 1,100 mm high, welded solid, consisting of 4x steel profiles, welded to rear plate and aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading, 2x3 aluminum side walls, 1,100 mm, foldable and lowerable On rear side panels, left and right, folding steps as access and grab ha

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2026, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, 3-Axle STAS Walking Floor Semi-Trailer 91.5 cbm NEW VEHICLE Internal dimensions (LxWxH): 13,500 x 2,475 x 2,650/2,825 mm Axle spacing: 1,310 mm Unladen weight: 8,090 kg Fifth wheel height: 1,150 to 1,180 mm Chassis made of hot-dip galvanized steel SAF axles with large 430 mm disc brakes. Reinforced design “CD” WABCO trailer EBS with RSS anti-skid protection WABCO Smartboard with axle load display 1st axle lift axle 3rd axle steering axle Air tanks made of aluminum Tyres: 6 x 385/65 R 22.5 JOST crank landing gear, full load version ASPÖCK full-LED lighting 4x LED work lights Toolbox rear left Side walls – profile joints inside fully welded CARGOFLOOR moving floor with 21 slats, material thickness 10 mm corrugated Operation with RADIO REMOTE CONTROL Rear closure plate made of stainless steel 3 crossbars, reinforced waste transport design Lrodpoyih R Ssfx Akqjk Roof roll tarp reinforced version Panama 900 g 12 pairs of lashing rings in the floor Cleaning door in the front wall Rear crossbar pivotable, can be unlocked from underneath! Optimal for bale transport RENTING is the new BUYING – also available immediately with full-service rental!

Condition: used, maximum load weight: 34,500 kg, overall weight: 50,000 kg, axle configuration: 2 axles, first registration: 05/2025, next inspection (TÜV): 05/2026, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 320 mm, Year of construction: 2025, Equipment: ABS, 2-axle low loader / low-bed trailer in full specification First registration 05/2025, brand new vehicle Overall length: 13,065 to 17,565 mm (simple telescopic extension 4,500 mm, extendable in 500 mm increments) Fifth wheel height: 1,200 mm Standard low-bed length: 6,650 mm Extended low-bed length: 11,150 mm Gooseneck length: 3,650 mm Rear axle assembly length: 2,765 mm Loading height on rear axle assembly: only 845 mm LOADING HEIGHT LOW-BED: only approx. 300 mm (loaded) Technical gross weight: 50,000 kg Technical fifth wheel load: up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis with 3-coat paintwork Detachable gooseneck with external main frame Central lubrication system for front carriage and an additional unit for rear carriage All axles with hydraulic forced steering GIGANT axles with drum brakes WABCO Trailer EBS with RSS (Roll Stability Support) WABCO Smartboard PENDLE AXLES with hydraulic suspension, 600 mm stroke RADIO REMOTE CONTROL Tyres: 9x 245/70 R 17.5 Continental Electric-hydraulic system, 24 volt Oversize package 10 pairs of foldable loading platform extensions, each 225 mm 3 pairs of CONTAINER locking adapters, for 40 FT or 20 FT containers Drop-side body on saddle platform Ramps for accessing the low-bed platform 5 pairs of swivelling lashing rings, each rated at 10,000 daN lashing capacity in the low-bed section 4 pairs of stake pockets in the outer frame 3 pairs of swivelling lashing rings on the rear carriage 1 pair of lashing rings in the rear underrun guard, LC 6,000 daN Lredpfxjw A Ekmj Akqjk RENTING is the new BUYING – available immediately for rent or full-service leasing.

Condition: used, maximum load weight: 29,280 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 13,260 mm, loading space width: 2,480 mm, loading space height: 2,945 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, SCHWARZMÜLLER 3-axle SANH Mega Curtainsider with one-piece tail lift for forklift transport First registration 10/2024, in as-new condition Mileage only 7,937 km (trade fair/exhibition trailer) Permissible gross weight (technical): 39,000 kg Unladen weight: 9,720 kg Internal length: 13,600 mm Internal width: 2,480 mm Internal height: front 2,895 mm, rear 2,945 mm, height adjustable Coupling height: 960 to 1,050 mm Chassis with frame reinforcements for increased point load: 20 tons over 5 m Perforated outer frame 22 pairs of recessed lashing rings, 4 t 10 pairs of recessed lashing rings, 5 t Anti-slip screen-printed floor, 27 mm + additional 12 mm cross-laid birch plywood, forklift axle load capacity 7,200 kg, rear bolted steel durbar plate wear sheet 5/7 mm Reinforced aluminium front wall, 2,550 mm high, interior front wall protection in 9 mm screen-printed board Tarpaulin bar at front corner posts with ratchet tensioner, curtain openable and tensionable from the front Rear portal extendable, 490 mm per side 3 pairs of reinforced centre posts, 5 rows of slat pockets 4 rows of aluminium slats, 100 mm EDSCHA sliding roof with steel scissors, can be moved both forwards and backwards Hydraulic lift roof, hand operated on both sides, roof lift height 400 mm Sliding curtain, Code XL INFLATABLE AIR HOSE SYSTEM in trailer roof Lsdpoxcrq Defx Akqerk DHOLLANDIA tail lift, load capacity 9,000 kg Full-height steel platform, 2,950 mm Platform drivable up to 14,000 kg! Remote control operation Hydraulic rear support SAF axles, disc brakes IntradiscPlus Integral Axle spacing: 1,310 + 1,410 mm 1st axle: lift axle 3rd axle: trailing steering axle Tyres: 6 x 435/50 R 19.5 Goodyear WABCO trailer EBS with RSS anti-skid system Spring-actuated parking brake on 2 axles Air suspension with lift and lower function, extra-long air bellows with total lift of 250 mm Axle load indicator via CAN bus Tire pressure monitoring Full LED lighting 2 x stainless steel toolboxes on left, 1,000 x 500 x 500 mm RENTING is the new BUYING – immediately available with us as a full-service rental!

Condition: used, maximum load weight: 32,246 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First Registration 04/2025 Internal Dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox steel HB450 Front and side walls made of 3 mm Hardox steel HB450 Pneumatically folding rear underrun protection Straight front wall, with interior access ladder Rear portal doors 50:50 with pneumatic sequential unlocking Reinforced roof tarpaulin HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators Lredpfx Akjygdvhjqjk JOST crank landing gears, full load SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE WABCO Trailer EBS with RSS roll stability control WABCO Smartboard Lifting and lowering device Automatic tipping lowering function Tyres: 6 x 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Left side toolbox 4x LED reversing lights RENTING is the new BUYING – also available immediately with full-service rental.

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed with Hydraulic Steering Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed Semi-Trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Total width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40 / 60 / 80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension travel: 260 mm (190 mm / -70 mm) * Additional ride height lift by 40 mm possible * Load gauge for axle load display * Semi-automatic alignment of steered axles with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system according to UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED tail and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED beacon (1 unit) Tyres & Rims * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system according to R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) Lodpfx Aeynprwskqerk * Spare wheel holder: 1 unit on the gooseneck Steering & Operation * Hydraulic steering on both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie bed connection * Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2-inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood floor * Each platform size: 100 × 1,300 × 2,115 mm * Each platform weight: 225 kg * 2 × lashing rings per platform with 8,000 kg tensile force * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform Stake pockets: * 6 × 2 units in the pool (50 × 100 mm) * 3 × 2 units at the rear (50 × 100 mm) Attachments & Accessories * Aluminum front panel on gooseneck: 360 × 1,550 mm * Aluminum side boards: 360 × 1,900 mm * Aluminum rear wall: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning panels (423 × 423 mm, up to 1,000 mm) * Yellow side reflector tape * Red rear reflector tape For further information, we are at your disposal.

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed Trailer with Hydraulic Steering Highlight: Optionally available for rental as a complete combination together with the truck shown in the photo. Manufacturer: Kässbohrer Type / Vehicle Code: K.SLL 2 / 2H ? 18 / 20 Ljdpfxeycnbas Akqjrk Vehicle Type: Lowbed Semi-Trailer Country of Registration: Germany Brand: Kässbohrer Chassis Color: RAL 3020 Traffic Red Dimensions & Weights External Length: 13,210 mm * Overall Width: 2,540 mm * Fifth Wheel Height (H5): 1,250 mm * Platform Height (unladen): 910 mm * Platform Height (laden): 300 mm * Platform Length: 6,810 mm * Extension: 5,550 mm * Gooseneck Length: 3,600 mm * Rear Swing Door: 2,100 mm * Platform Thickness: 200 mm * Wheelbase: 10,530 mm * Axle Spacing: 1,360 mm * Unladen Weight: approx. 12,873 kg (±3%) * Gross Vehicle Weight (40 / 60 / 80 km/h): 42,000 kg * Total Axle Load: 24,000 kg * Perm. King Pin Load: 18,000 kg (40 / 60 / 80 km/h) ----Chassis & Axles 2 Axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional lifting of the driving level by 40 mm possible * Load gauge for axle load display * Semi-automatic tracking of steered axles with warning light sensor ----Brake System WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system in accordance with UN ECE R13 ----Electrics & Lighting 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED rear and fog lights * Electrical system compliant with UN ECE R48 & ADR * LED work lights at rear (2 units, automatic reverse activation) * LED beacon (1 unit) ----Tires & Rims Tire size: 245/70 R17.5 * Tires: M+S * 3PMSF (winter suitable) * Tire pressure monitoring system in accordance with R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on gooseneck ----Steering & Operation Hydraulic steering for both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load indicator * Suspension control * Tire & brake wear monitoring * Breakdown & system monitoring ----Chassis & Frame High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallizing (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single ----Platform & Body 3 removable platforms with hardwood floor * Dimensions per platform: 100 × 1,300 × 2,115 mm * Weight per platform: 225 kg * Per platform 2 × lashing rings with 8,000 kg tensile force * Platform extension: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized ----Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform * Stake pockets: * 6 × 2 units in pool (50 × 100 mm) * 3 × 2 units at rear (50 × 100 mm) ----Attachments & Accessories Aluminum front panel for gooseneck: 360 × 1,550 mm * Aluminum side panels: 360 × 1,900 mm * Aluminum rear panel: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73

Condition: new, maximum load weight: 25,160 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 1,380 mm, total width: 2,550 mm, total height: 1,410 mm, Year of construction: 2025, Equipment: ABS, Wiese Building Material Semi-Trailer Fifth-wheel load: 12,000 kg Axle load: 27,000 kg Permissible gross vehicle weight: 39,000 kg Curb weight: 10,840 kg Loading platform length: approx. 9,200 mm Overall length: approx. 10,600 mm Internal width: 2,480 mm Overall width: 2,550 mm Kingpin 1 position with 2" kingpin Coupling height In horizontal position: approx. 1,160 mm Top edge of main beam (without floor): approx. 1,380 mm Loading height: approx. 1,410 mm Lashing hole external frame D=30 mm with perforated strip at angle (160 mm high / 30 mm floor recess / 4 mm wall thickness), Main beam spacing 980 mm (center/center) - 1,130 mm (outer/outer) Axles 3 axles, each with 9,000 kg load capacity Brand: SAF with disc brakes D=430 mm Track width: 2,040 mm ABS: 1 axle sensed Axle spacing: approx. 1,510 mm / approx. 1,510 mm Suspension Original SAF air suspension, with raise/lower valve with retaining cables Axle lift Lifting axle, 1st axle, automatic load-dependent for starting assistance, controllable via push button in driver’s cab Steering Mechanical forced steering on axle 2 + 3 Two-bar steering / Manufacturer: Tridec Brake system 2-line Wabco compressed air braking system according to EU directive 71/320/EEC etc. with: EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket 1x ISO coupling head yellow 1x ISO coupling head red Spring-loaded parking brake on 2 axles all fitted with quick couplings Aluminum air reservoir Air system Compressed air installation with: 1x raise/lower valve 1x level control valve Aluminum air reservoir all fitted with quick couplings Automatic lowering of air suspension during crane operation Tires 6 units type: 385/65 R22.5" Brand: at manufacturer’s choice Ledpfx Akeyl D Eyoqerk Tire pressure monitoring system for all 6 tires, display in driver’s cab Rims 6x steel rim 11.75x22.5", 10-hole, center-mounted, offset: 120mm Support device Mechanical landing legs with T-swivel foot, permitted lift load: 2x 12,000 kg Operable from one side, two speeds Brand: at manufacturer’s choice Wheel covers & mud flaps 6x plastic half-shell wheel covers Mudguard mounting reinforced with flat steel Note: mudguard on steered axle 3 with internal cutout Lighting system 24V lighting system according to EU directive 76/756/EEC etc. with: 2x multi-chamber tail lamps Lane marker lamps License plate lighting LED side marker lamps with indicator function 2x 7-pin and 1x 15-pin connector installed as per EU standard Tail lights mounted in reinforced light carrier = certified rear underrun protection All necessary markings Additional installation: Electrical connection for crane control pre-installed as specified! Safety equipment Side underrun protection and rear underrun protection in aluminum according to EU directives Floor OKULEN floor 32 mm Superstructure Straight front wall, 1,200 mm high, welded solid, consisting of 4x steel profiles, welded to the front plate with aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading Straight rear wall, 1,100 mm high, welded solid, consisting of 4x steel profiles, welded to rear plate and aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading, 2x3 aluminum side walls, 1,100 mm, foldable and lowerable On rear side panels, left and right, folding steps as access and grab ha

Condition: new, maximum load weight: 14,826 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, Year of construction: 2025, Equipment: ABS, 2-axle 18 t Hüffermann skid roll-off trailer "NEW" Type HSA 3 / 20.71 ZB 'Sliding Carrier' for roll-off container lengths from 5.0 m up to max. 7.0 m, SAF axles 2x 10,000 kg air-suspended with automatic lowering when uncoupling the brake, Wabco braking system, ABS, disc brakes with electronic brake and stability system EBS-E and RSS (significantly reduces the risk of vehicle rollover, reduced brake pad wear), load detection/axle load display via EBS CAN bus signal for display in the driver's cab (truck must be suitably equipped), tire pressure monitoring system according to ECE regulation 141, automatic slack adjusters, certified load securing through four pneumatic locking systems, side protection device in anodised and closed design, V-drawbar approx. 2600 mm long, 40 mm towing eye, tool box 600 x 500 x 500 mm, tires 265/70 R 19.5 // 8 units, Hella modular lights partially in LED, flashing LED side marker lights, additionally 2 pcs. LED reversing lights, front and rear LED position lights, A-plate and ADR board foldable, contour markings white on sides, yellow on rear, underrun protection with ram buffer and rear apron, 15-pin power supply, duomatic coupling head, painted in RAL colour DB 7350 Novagrau, silver rims, axles in black KTL coating, attachments hot-dip galvanized, gross weight 18,000 kg, technically possible up to 20,000 kg, new vehicle, immediately available from stock Bünde, without first registration incl. manufacturer's warranty, sale only to business customers! All information provided without guarantee! Subject to errors and prior sale! Lrodpfx Ajyk N A Iokqjk

Condition: used, maximum load weight: 14,826 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2025, loading space length: 7,000 mm, Year of construction: 2025, Equipment: ABS, 2-axle 18 t Hüffermann Skid Roll-off Trailer "NEW" Type HSA 3 / 20.71 ZB "Skid Carrier" for roll-off container lengths from 5.0 m up to max. 7.0 m, equipped with 2 x 10,000 kg SAF axles, air suspension with automatic lowering when the brake is disconnected, Wabco braking system, ABS, disc brakes with electronic braking and stability system EBS-E and RSS (Significantly reduces the risk of vehicle rollover, reduced brake pad wear), Load recognition/axle load display via EBS CAN bus signal for display in the driver's cabin (corresponding truck preparation required), Tire pressure monitoring system according to ECE regulation 141, automatic slack adjusters, certified load securing through four pneumatic locks, side underrun protection in anodized and enclosed version, V-drawbar approx. 2,600 mm long, 40 mm eye, tool storage box 600 x 500 x 500 mm, 265/70 R 19.5 tires // 8-fold, Hella modular lights partly LED, flashing LED side marker lights, additional 2 LED reversing spotlights, LED position lights front and rear, folding A-board and ADR sign, contour markings: white on the side, yellow at the rear, underrun protection with collision buffer and rear apron, 15-pin power supply, Duomatic coupling head, painted in RAL color DB 7350 Novagrau, silver rims, axles black KTL-coated, add-on parts hot-dip galvanized, gross weight 18,000 kg, technically possible 20,000 kg, new vehicle, immediately available from stock Bünde, without first registration incl. manufacturer's warranty, sale only to business customers! All information without guarantee! Subject to errors and prior sale! Lrjdpeyk N Azjfx Akqek

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Lrodpfx Aoxf Spfjkqek Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Lrsdpfx Aoyiw T Eekqek Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Ledoxf Sn Ispfx Akqerk Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: used, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension Disc brakes 430 mm “off-road version” SAF-Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally mounted to chassis longitudinal member 3rd axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, lift-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70%, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin 2" - bolted into an 8 mm thick plate Landing gear Mechanical landing legs, 2 speeds, 2x20t support load, with swing foot for air suspension Lrsdpfx Aeyiw T Sskqok Brake system According to ECE regulations, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, aluminium air tank system Electrical system According to StVZO guidelines with 2 five-chamber Aspöck type lights, 24V system with 2x7 and 1x15 pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly laid in plastic pipes Tipping body / Dump body “smooth construction” Fully welded inside Aluminium dump body, side walls with 30 mm thick plank profiles (2-3 mm) welded 600 mm wide, floor 6 mm thick, high wear-resistant alloy (5383H34/HB 110) with 45-degree bevel to side wall, front wall 4 mm reinforced, inclined design, rear wall designed as a universal door, straight design with 2 wing doors in 2/3–1/3 configuration and a grain chute, ALU round profile welded laterally and below to seal door gap on rear doors, rear doors partly clad with smooth aluminium. Universal door operated automatic-pneumatic, lockable with separate lever, aluminium rear brace pivotable, two hold-downs with rubber buffer on the dump body fixed to the frame at the front wall. Hydraulic system Tipping cylinder with "rotule" suspension (light) Hydraulic cylinder mounted on front wall with a working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and loose 1" half, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap over the full vehicle width attached to underrun guard, no spare wheel holder, aluminium, foldable side underrun protection right side, large toolbox type 860, approx. 3 m aluminium ladder, 3 central aluminium swing bows raised approx. 150 mm, additionally a centrally mounted bow holder for positioning up to 2 bows to widen the loading width, roll tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality with roll tarp system, continuous rubber cord at the rear closure of the tarp with two tension hooks to be fixed on the rear swing bow, catwalk on the frame in chassis colour with access left and right, tarpaulin closure to the side with quick-release fastener, rear tarp closure with welded rubber cord to prevent water ingress, robust foldable underrun protection in aluminium, 2 "Clear-Pass" spray flaps on mudguard according to EU standard, aluminium grain hopper fixed to the side of the frame with plan bag, holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Offer and images subject to change.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" Lrodjgcw Rmjpfx Akqsk reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Lrodpfxjyh S Aij Akqsk Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3x9 tonne capacity with air suspension, first axle with lift function including starting aid and electric operation, raise and lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385 / 65 R22.5 tyres on STEEL rims, 2" king pin bolted into a 10 mm thick plate, mechanically operated landing gear with single-side operation, braking system compliant with E.E.C. regulations, two-line air system, spring brake actuators on two axles and Wabco EBS unit with RSS system (Roll Stability Support), aluminium air tank, electrical system per German STVZO with two Aspöck five-chamber lights, 24V installation, aluminium tipping body, Edbro-brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mudflaps, side underrun protection, rear underrun protection, catwalk on the chassis, fully welded, LL rubber seal, spindle locks on the rear door, tipping body available with mud seal on request! Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. Lodpfx Akoyh S Acsqork FURTHER EQUIPMENT AVAILABLE ON REQUEST. COLOR FREELY CHOICEABLE. +590 € transport costs. Also available in Z9-Z13 variants. Images and offers are subject to change.

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Lredpfx Aksfi Nmwsqok Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Lredpfx Akjxriu Eeqjk Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Burgers Double Deck Trailer | 2-Axle Steered NEW More volume. Lower costs. More sustainable transport. Up to 60% more loading space compared to standard trailers. In many cases, replaces 3 trailers with 2 double deckers, reducing CO₂ emissions by up to 40%. Technical Data (Model: 2-axle steered) Chassis and Running Gear Design: 2-axle, steered * Axle system: TRIDEC TF-V02, mechanical steering without electronics * Air suspension with low-maintenance bushings, lift range +160 mm / -105 mm * Axle spacing: 1,400 mm * Axle load: 2 × 9,000 kg = 18,000 kg * Permissible gross weight: 30,000 kg (12,000 kg kingpin load + 18,000 kg axle load) * Tyres: 4 × Goodyear 385/65 R22.5 on steel rims * Wheelbase and axle position adjustable according to loading scheme * Wheel housings with wear blocks and anti-spray mudflaps * Fully hot-dip galvanized chassis to ZINQ standard Brake and Safety Systems WABCO 2-line air brake system * Drum brakes 420 × 180 mm * ABS/EBS-E with ECAS (level control), ELEX, and RSS (electronic stability control) * Visible indicator lights for ABS/EBS and ECAS Dimensions External dimensions (L × W × H): 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: Length 13,590 mm × Width 2,500 mm × Height 1,820 mm * Lower deck internal dimensions: Length 9,940 mm × Width 2,500 mm × Height 1,820 mm * Lower deck height from ground: 320 mm Bodywork and Materials Side walls: 21 mm plywood, coated inside and out with white polyester * Front wall: 24 mm plywood, both sides polyester white * Roof: 30 mm insulated polyester panel, white, with rainwater drainage * Floors: Aluminium profiles (top and bottom), non-slip, grey coated * Stainless steel front and corner profiles, L-profiles on side flaps Access and Operation Three side flaps (battery compartment, lift/smartboard control, technical access) * Multi-deck lift Dhollandia DH-VH (2,500 kg lifting capacity, hydraulic folding tip, LED platform lighting, foldable handrails and ramps) * Lift control: external operation on the right, integrated into the fence * Spare wheel not included Electrics and Lighting LED interior lighting upper and lower deck * Complete LED exterior lighting: position, marker, reverse, and work lights * Additional LED for platform lighting * Power supply via 2 × 230 Ah batteries, charging via tractor unit * Main switch behind side flap, coupled with lift control * WABCO Smartboard: weight display, odometer, adjustable loading/unloading heights Lrodpfx Aow I Iinjkqok Finish and Paintwork External colour: RAL 1003 yellow (non-metallic) including wheel wells, stainless steel front and rear * Reflectors: 3M partial contour marking (white sides, red rear) * Advertising space possible (optional) Benefits 60% more loading space – replaces up to 3 standard trailers with 2 double decks * 40% lower CO₂ emissions – eco-friendly and economical * ROI often within just 1 year * Customisable (axles, cooling, dimensions) * Suitable for long-haul and distribution transport Available Configurations at Burgers: 2-axle standard – rigid or steered, 13.60 × 2.55 × 4.00 m * 3-axle standard – rigid or with steered axle * City trailer – max. 11.50 m, always steered * Special dimensions – height up to 4.25 m depending on national regulations * Body: plywood or insulated, optionally with cooling and temperature zones * Extras: tail lift, hydraulic ramp, solar modules, cameras, aerodynamic profiles, LED packages For further information, we are happy to assist you.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Lrsdpsx Nuf Hofx Akqjk Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Lrodpfxox Nuf Tj Akqjk Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Trailer—Type: CR 47 Chassis: Two fully automatically welded I-shaped longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle units with air suspension, axle spacing of 2 x 1310 mm, lift and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO compressed air brake system with RSS, according to standard 98/12/CE – ECE R13/09, connected brake wear indicator Lrsdjx Nufmopfx Akqok Landing Gear: Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot, rear without landing support Electrical System: All lights are LED, 24 V electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, required number of yellow side marker lights, rear position lights, front marker lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted at the pivot height in aluminum brackets according to standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at the rear, mounted at hose pipe height, 2x reverse lights in underrun protection, 2x reverse lights at landing leg height (each switchable on the power console) Tank Version: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, 47,000 liter capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 4 manholes DN 450 with swing and hinged dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber supports on top for dome covers, drip rail closed at the front, open at the rear Material Discharge: 1 material discharge cone DN 800 made of stainless steel, folding with stainless steel agitator disc, material discharge cone can swing sideways, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5'' stainless steel main air line mounted right side operations, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail, can be raised with a separate fold-out ladder section from below with parking brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Delivery Hose Compartment: 4 hose tube containers 5 m long, DN 200, made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum, left side