Used Work Center for sale (53,767)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 128 h, machine/vehicle number: A300063328, power: 3 kW (4.08 HP), overall weight: 2,600 kg, maximum load weight: 200 kg, pivoting range: 345 °, working height: 10,100 mm, TECHNICAL DETAILS Working height: 10.10 m Lateral outreach (standard platform): 3.38 m Up-and-over height: 6.51 m Slew range: 345° Platform capacity: 200 kg Articulating jib length: 1.60 m Articulating jib movement range: 126° (+69°/-61°) Platform size (L × W): 0.70 × 0.90 m Platform width: 0.99 m Max. permissible ground pressure: 19.7 kg/cm² Drive speed, stowed: 5.5 km/h External turning radius: 1.99 m Internal turning radius: 0.55 m Climbing ability: 25% Ground clearance: 0.10 m MACHINE DETAILS Tire size (non-marking): 406 × 125 mm Operating voltage: 24 V DC Batteries (AGM): 24 V – 260 Ah Charger: 24 V – 27 A Drive motors: 2 AC motors Electric motor (pump): 3 kW, 24 V DC Hydraulic oil volume: 7.5 l Dimensions & Weight Transport length: 2.82 m Transport width: 1.20 m Transport height: 1.99 m Machine weight (standard platform): 2,600 kg EQUIPMENT Steel platform Sliding bar at rear access Proportional drive and slew control via joystick with integrated thumb steer switch Mini joysticks for proportional boom and articulated jib lift functions Load monitoring system Mains power cable to platform Large tool tray Direct electric two-wheel drive Brushless AC drive motors Kdodpfxjyzq Axe Abgsk Automatic idle energy-saving function Low-charge automatic cut-off On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Passive pothole protection system Tie-down and lifting eyes Ground controls selector switch with key lock Battery discharge indicator Operating hours counter Horn Drive orientation system Anchor points for safety harnesses Xenon strobe beacon Manual lowering system

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window - Pallet storage - External MQL (minimum quantity lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Preparation for additional touch probe - Event Messenger - Tool identification HSK - Machine license TCS-Soflex - Electronic thermal compensation Kedeyzyttjpfx Abgedk - Electronic hand control module - Oil mist extraction (prepared & with after-filter) - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor - Test protocol: C 40 iTNC 530 PW160

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,858 h, functionality: fully functional, turning length: 705 mm, turning diameter: 275 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MSX-850III, TECHNICAL DETAILS Travel X-axis: 260 mm Travel Z-axis: 795 mm Turning length: 705 mm Max. turning diameter: 275 mm Swing over bed: 923.8 mm Swing over cross slide: 755 mm Bar work capacity diameter: 80 mm Upper turret Number of tool stations: 12 Main spindle Spindle speed: 4,000 rpm Spindle drive power: 18.5/18.5/15 kW (10 min/30 min/cont) Spindle nose: JIS A2-8 Tailstock Tailstock travel: 734 mm Taper: MT5 MACHINE DETAILS CNC control: MSX-850III Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,922 x 2,120 mm Weight: 5,800 kg Operating Hours Main spindle hours: 3,858 h Power-on hours: 21,543 EQUIPMENT Chip conveyor Tool measuring arm Kdsdpfxoyz Aq Is Abgjk

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 45 m/min, Equipment: CE marking, The machine has the following configuration: Drilling units: Upper unit with 30 vertical and 6 horizontal spindles Milling unit 1: Upper unit, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper unit, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, mounted at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm Kodpfeyzy S Nox Abgsdk X-axis traversal speed: 40 m/min Y-axis traversal speed: 45 m/min Z-axis traversal speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with vacuum rail supports Number of vacuum rails: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Condition: excellent (used), Year of construction: 2014, Willemin-Macodel SA Model 308B 5 Axis Machining Center Mfd. 2014 X 160 mm Y 120 mm Z 150 mm # Axis 5 Power 7 hp RPM 30,000 RPM # ATC 28 Taper HSK E32 Willemin-Macodel SA Model 308B 5 Axis Machining Center (2014) X1 6.300" Y1 4.720" Z1 5.910" A1 360.000° B1 130.000° Taper HSKE32 Rapid Feeds 1,181ipm Equipped With 5 Axis Kedpfx Aey Abcxsbgedk 28 Position ATC 30000 RPM Pallet Recognition Fire Protection Auto Fire Suppression Filter Mist Extraction

Condition: used, Year of construction: 2021, EMAG VMC 450 MT Mfd. 2021 Control: Siemens 840D SL Machine has no production hours Description CHUCK DIAMETER: 24" MAX WEIGHT: 1100 LBS. Kodpfx Aeyzkdvebgodk MAX SWING DIAMETER: 31" MAX TURNING DIAMETER: 23.5" X STROKE: 30" Z STROKE: 19" MAIN DRIVE: POWER: 100 HP FULL POWER AT 800 RPM MAX SPINDLE RPM: 2,000 C AXIS POSITIONIONG TO .01MM ANGULAR DEGREES FEED DRIVE: RAPIDS Z / Z: 60 / 30 M / MIN. FEED FORCE X / Z 4 / 15 kN BALL SCREW DIAMETER X / Z: 40 / 50 MM MILLING SPINDLE: POWER: 100 HP MAX SPINDLE SPEED: 7000 RPM SPINDLE TAPER: CAPTO C8 TOOL MAGAZINE: 60 EQUIPPED WITH: MINERALIT MACHINE BED SIEMENS 840 D SL FULL ENCLOSURE LEVEL PADS TURN MILL DRIVE EMAG WORKPIECE CORRECTION SYSTEM EMAG OPERATING AND SETTINGS MASKS EMAG REMOTE DIAGNOSIS Y AXIS B AXIS +/- 95 DEGREE 1000 PSI COOLANT THROUGH TOOL X-AXI CLAMPING FOR GEAR TOOTH FORMING SWARF CONVEYOR, CHAIN TYPE - REAR DISCHARGE LIFTING PUMP PAPER FILTER LOW PRESSURE COOLANT HIGHT PRESSURE COOLANT 1000 PSI PROGRAMMABLE COOLANT PRESSURE COOLANT MIST EXTRACTOR AIR BLAST CHIP FLUSH QUALITY CONTROL: WIRELESS GAUGING CALIBRATION BLK FOR PROBE TOOL GAUGING - BLUM LASER

Condition: used, Spinner MICROTURN 52 LTBS Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles AUTOMATION READY - MC0122 Less than 300 hours No bar feed Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling Chucks etc. included Yes Coolant: used Water Based What kind of facility is it in? R and D for performance parts for injector and turbos Specifications Work Area: Swing Diameter: 23.9 in (608 mm) Turning Diameter (max): 5.9 in (150 mm) Turning Length(max): 9.8 in (250 mm) Travels: X: 23.6 in (600 mm) Z:13.8 in (350 mm) Y1 Turret: +/- 1.9 in (50 mm) Y2 Milling Spindle: +/- 1.9 in (50 mm) B Rotary: 180 degrees Feedrate: Rapid Traverse X: 944.8 ipm (24 m/min) Rapid Traverse Y: 590.6 ipm (15 m/min) Rapid Traverse Z: 944.8 ipm (24 m/min) Spindle #1 Left / #2 Right: Liquid cooled motorized spindle with C-axis servo drive and encoder for synchronous machining. Spindle Bore Capacity: 52mm (2.0 in) Speed: 5,200 rpm Performance (S6 40%): 22.1 hp (16.5 kW) Torque (S6 40%): 81.1 ft-lb (110 Nm) Spindle Nose: DIN 55026-A6 B-Axis Milling Spindle: Speed (max): 12,000 rpm Performance (S6 40%): 12 hp (9 Kw) Kdsdpfxoyzkdco Abgjk Torque (S6 40%): 15.4 ft-lbs (21 Nm) Swivel Angle: +/- 180 degrees Positional Measurement: Rotary Encoder Clamping: Hydraulic Turret: Stations: 12 / BMT45 Live Tooling Speed: 8,000 rpm Performance (S3 25%): 5.8 hp (4.3 kW) Torque (S3 25%): 10 ft-lb (13.6 Nm) Tool Magazine: Station Quantity: 72 Holder Type: HSK40 Tool Length (max): 4.1 in (105 mm) Tool Diameter (max): 3.5 in (88 mm) Tool Diameter (max) - Adj Pocket Empty: 3.9 in (100 mm) Size & Electrical: Technical design according to CE standards. Machine Dimensions: 119.3 in (3030 mm) x 111.8 in (2840 mm) x 113.8 in (2890 mm) Machine Weight: 16,976 lbs (7,700 kg) Operating Voltage: 3 x 400V (+/-10%) Main Frequency: 60 Hz (+/- 2%) Electrical connection: TN network (5-wire) Standard Equipment • 72-station tool magazine mounted on top of the machine • Hydraulic spindle brake on spindle 1 • Hydraulic spindle brake on spindle 2 • Spindle rinsing on spindle 1 (switchable between coolant or compressed air) • Spindle rinsing on spindle 2 (switchable between coolant or compressed air) • CNC Clamping Force Setting on Spindle 1 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • CNC Clamping Force Setting on Spindle 2 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • Linear tool slide with coolant supply • Signal lamp • Rear exit chip conveyor - includes feed pump rated at 5 bar at 20l/min or 3.7 bar at 83l/min • High pressure coolant system with additional 61 gallon (230 liter) tank. Maximum 319 psi (22 bar) • Renishaw tool probe for measuring tools in the X/Y/Z axis • Preparation for mist collector unit • Automatic operator door that opens at the end of the program and closes with the start. Includes necessary safety technology. Suitable for manual loading or automation access. • UNIROB universal robot interface via a common plug on the machine control cabinet with the following signals: • Safety signals (emergency stop/door signals, etc.) • Standard signals via Profinet PN bus coupler on RJ45 module. Otherwise according to the Unirob-V2021 functional description CNC Control System

Year of construction: 2020, condition: excellent (used), machine/vehicle number: 101262, Porta Solutions MULTICENTER 3 SPINDLE 3 Spindle Machining Center Mfd. 2020 Kjdpfx Aevn T Daebgsdk SN: 101262 Control: Fanuc Panel i Chip Conveyor

Condition: excellent (used), Year of construction: 2022, Swiss CNC Chucker-Convertible Sliding Headstock Lathe W/ "B" Axis Kjdpfx Aeyq S Utjbgodk

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Kodpfx Aboyf Ncqjgedk Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 126937, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 32, controller manufacturer: Okuma, controller model: P200M-H, rotary table diameter: 400 mm, OKUMA MU-400VA 5-AXIS CNC VERTICAL MACHINING CENTER, FROM AEROSPACE COMPANY, 16" ROTARY PLATEN, 4TH AND 5TH AXIS BUILD IN TRUNION, 15,000 RPM 32 POSITION TOOL CHANGER, OSP P200M-H CNC CONTROL Okuma MU400VA CNC Vertical Machining Centre (2007) Description: Control OSP P200 Table working surface - 15.75", Max table load - 600lbs, X Axis travel - 30", Y Axis travel - 18.11", Z Axis travel - 18.11", A Axis trunnion tilt - +20 to -110deg, B Axis table rotation - 360deg, Table surface to spindle nose - 3.94" - 22.05", Rapids X & Y - 15.75 IPM, Spindle taper - CAT 40, Spindle speeds - 16000 RPM, Spindle Motor - 20HP, Tool magazine capacity - 32 Table Size 15.75" Dia Table Load Capacity 660 LBS # Axis 5 X-Axis (Longitudinal Travel) 30" Y-Axis (Cross Travel) 18.11" Z-Axis (Vertical Travel) 18.11" A-Axis (Trunnion Tilt Range) (±25°) +20° to -110° C-Axis Table Rotation Positioning 360,000° Max/Min Clearance Table Top to Spindle Nose 22.05" / 3.94" Distance Floor to Table Top 41.34" Rapid Traverse Rate (X, Y, & Z Axis) 1,574 IPM Spindle Horsepower 20 HP Max Spindle Speed 15,000 RPM Spindle Taper MAS BT40 Big plus Coolant Thru Spindle yes Automatic Tool Changer Capacity (ATC) 32 Electrics 220/3/60 Approximate Machine Dimensions 114" x 160" Approximate Machine Height 116" Approximate Machine Weight 17,000 LBS OKUMA OSP P200M-H CNC CONTROL BUILT IN 4TH AND 5TH AXIS 16" DIAMETER TRUNION TABLE 15,000 RPM SPINDLE LASER TOOL SETTER 32 POSITION AUTOMATIC TOOL CHANGER Kdedpfxou Illae Abgjk COOLANT THRU SPINDLE CHIP CONVEYOR

Condition: good (used), machine/vehicle number: 224194-0451, Euroturn (ZPS Mori-Say) 6-32 rebuilt multi-spindle screw machine SN: 224194-0451 6 Spindles 32mm Capacity Voltage: 480v With Spindle Stopping Siemens Control System Pickoff and Back Finish Stock Reel Cover and Stand Sedimentation Tank Upgrade: Servo Feed Drive in place of main spindle drive Upgrade: Repair Drum Path Quality Inspection Report Kdedpfstic Hqox Abgjk Machine Install 1-Year Warranty Turnkey Available Call for more information

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Kdjdpoxdc T Sjfx Abgek

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Two machines in one, made by the best Swiss CNC manufacturer. 1. Log milling 2.Timber Framing. This machine produced machined log structures for 6 years, (dormant since), of high precision and quality, for very discerning buyers. For progressive builders who want to automate milled log structures up to 8" x 12" material, or use strictly for timber framing. Best suited for USA or Canada customer, for easy truck transport. Delivery, set-up, calibration, operational training arranged at cost. Self-contained Compact design, only 10 feet deep, 8 feet wide. All processes are performed inside the enclosure. Cut-offs fall into and are removed from a central pit. Mill shavings are extracted by air suction, leaving work area remarkably clean. Kjdpjwvwl Aofx Abgjdk So quiet, you can have a conversation beside the working machine.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 71 mm, turning diameter: 710 mm, turning diameter over bed slide: 710 mm, turning diameter over top slide: 420 mm, turning length: 3,000 mm, Model: SN 71 B Serial No: 071300780049 Swing Over Bed: 710mm Swing Over Top Slide: 420mm Swing In Gap: 960 x 300mm Spindle Speeds: 10-1000 RPM Spindle Bore: 71mm Motor: 7.5 KW Machine With: 625mm 4 Jaw Chuck Fixed Steady Quick Change Toolpost Kdsdpfxoy Duc Io Abgok Dimensions: 5000 x 1500 x 1750mm Weight: 3250 Kgs

Condition: good (used), Year of construction: 2012, Swing over bed 641mm, Kdsdjy Ax Ixspfx Abgok 229mm max. machining diameter, 356mm cutting length, 6000rpm spindle, 44mm bar capacity, 12 station turret, 11.2kW spindle motor, +/-50mm Y axis, C axis & Milling, HAAS control, 3 jaw chuck, coolant, swarf conveyor, Tool Setter,

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho Machining Centre 5-Axis Simultaneous Kdodpfxey D Nfdj Abgok Type DMU 80 P Year 1998 Heidenhain CNC With Tooling

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turn-mill spindle Full indexing specifications: Yes X-axis travel: 380 mm Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower Turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotational speed: 6,000 min⁻¹ Driven tool power: 1.5/1.2 kW Main Spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub Spindle Spindle speed: 1,000 rpm BW axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang to conveyor, if equipped) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Kjdjy Edc Hopfx Abgjdk Potential rated output: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Powered on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blower outside the spindle Foot switch (double) for main and sub spindle

Condition: used, mileage: 29,900 km, power: 100 kW (135.96 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special Equipment: Storage compartment on dashboard with USB port, audio system: digital audio system (DAB) with USB and Bluetooth hands-free kit, bodybuilder interface with extension module and CAN data bus, vehicle key with remote control, electric parking brake, steering column (steering wheel) height and reach adjustable, PTO (power take-off) 180 Nm, smoker package, cab seats: single passenger seat, cab seats: comfort driver seat (hydraulic) Additional Equipment: Driver’s airbag, trailer stability program (TSM), trailer socket pre-installation, traction control (ASR), comfort dashboard in blue, model: S-series, exterior mirrors electrically adjustable and heated, brake assist, electronic brake force distribution, driver assistance system: hill start assist (AAS), rear axle suspension: reinforced parabolic, front axle suspension: transverse leaf spring, tinted windshield and side windows, alternator 210 A, speed limiter system: 160 km/h, urea (AdBlue) tank: 20 L, body/chassis: flatbed, fuel tank: 70 L, blue radiator grille, engine: 2.3 L – 100 kW diesel, wheelbase: 3450 mm, low-emission according to Euro 6d standard, service interval display, permissible total weight: 3.50 t Versalift LT-30-110-TB 11.2 meters 2 persons 200 kg The vehicle is in very good condition! Financing available through Santander Bank. Kedpfsy D Irpex Abgjdk

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details turning diameter over bed 570 mm turning diameter over slide rest 365 mm turning length 3000 mm weight of the machine ca. 5 t dimensions of the machine ca. 5,5 x 1,44 x 1,38 m Additional information Well-maintained lathe from the maintenance department. Working range: Swing diameter over bed 570 mm Swing diameter over cross slide 365 mm Swing diameter in bed recess 600 mm Length of bed recess in front of main spindle 160 mm Turning length 3000 mm Center height over flat surface 280 mm Bed width 360 mm Maximum workpiece weight without steady rest 500 kg Maximum workpiece weight with steady rest 630 kg Main spindle speeds 11.2 - 2240 rpm Drive power 15 kW Feeds 60 longitudinal feeds/revolution 0.063 - 56 mm 60 cross feeds/revolution 0.0315 - 28 mm Tapping 60 thread pitches 0.25 - 224 mm 60 thread counts 112 - 0.125 TPI Travels Cross slide 345 mm Top slide 125 mm Tailstock quill 190 mm Main spindle Spindle head DIN 55022 size 8 Camlock spindle head size 8 Spindle bore diameter 62 mm Spindle bore diameter at front bearing 100 mm Tailstock Kdodpfx Aboy Ed T Sjgsk Quad diameter 80 mm Equipment and accessories: 3-axis digital readout 3-jaw chuck 4-jaw chuck RÖHM, 500 mm diameter mm Boring rod holder Center points Multifix tool holder with tool holders Steady rest Machine documentation

Condition: used, Year of construction: 2023, operating hours: 1,285 h, QUASER UX_500 C 23.12.2025 Year of manufacture: 2022, Commissioned: 2023, Like-new, flawless condition, Only 1,285 production hours Standard Specification: - Siemens 828 D PPU29 control with 15" touchscreen - Adjustable operator panel (tiltable and rotatable) - Heat exchanger for climate-controlled electrical cabinet - Tool system: SK40_BigPlus, suitable for holders with/without face contact according to DIN 69871 - Pull studs according to DIN 69872 - Portable electronic handwheel - Double-arm tool changer with 30 stations - Pneumatically actuated tool change door - Direct position measuring system on rotary axis - Direct position measuring system on tilting axis - Infrared receiver for workpiece and tool measurement - Three-color signal beacon - Coolant spray gun - External air blast for dry machining - Automatic central lubrication for ball screws - Computer-optimized, heavy machine base from heavily ribbed cast iron - Sturdy and rigid portal-type machine design - Chip disposal consisting of work area chip flushing system with Grundfos pump (75 L/min at 3 bar) - Chip channels made of stainless steel - Two auger conveyors in the work area - Full work area protection with two corner view windows and two work lights - Flood coolant with 4 ring nozzles at spindle nose, Grundfos pump (75 L/min at 3 bar) - Machine color: RAL 7035 light grey - Coolant tank, spindle headstock, and doors painted RAL 9005 deep black Existing Siemens options: - SW option: Kinematic measurement cycle 996 for Siemens 828 D - Cycle for measuring the center point of rotary and tilting axes Kdedpfx Aboy D T H Eogsk - SW option: In-process measuring cycles for Siemens 828 D - Measurement cycles for automatic workpiece inspection/measurement - Workpiece zero-point probing with infrared 3D probe - Operating manual UX500 Siemens 828 D - SW option 3D simulation - Network drive management Further details, including video, available upon request by email.

Condition: excellent (used), Year of construction: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Z travel: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 kg NC rotary table with direct drive Positioning: 0.001° Max. Max. speed of the rotary indexing table: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 KW (25%) / 28 KW (100%) Spindle torque: 1210 NM / 680 NM Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 places Max. Tool diameter: 325 mm Max. Tool length: 800 mm Max. Tool weight: 35 kg Kodpfevgxfyex Abgedk Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in the tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 7001203, turning diameter over cross slide: 438 mm, spindle bore: 152 mm, turning diameter over bed slide: 860 mm, center width: 2,300 mm, spindle speed (max.): 680 rpm, bed width: 510 mm, TECHNICAL DETAILS Centre distance: 2,300 mm Swing diameter over bed: 860 mm Swing diameter over cross slide: 438 mm Bed width: 510 mm Ksdpfey Edw Rex Abgjdk Spindle mounting: A2-11 Spindle bore: 152 mm Spindle speed range: 8 - 680 rpm Number of speeds: 12 Tailstock quill diameter: 120 mm Tailstock quill travel: 165 mm Quill taper: MT6 MACHINE DETAILS Motor power: 22 kW

Condition: like new (used), Year of construction: 2014, operating hours: 925 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,808 mm, total length: 4,447 mm, chuck outer diameter: 210 mm, total width: 2,378 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, 925 spindle hours—in other words, virtually as good as new; that’s certainly the case for this DMG MORI CTX ALPHA 500 V4! The machine comes from a prototype department where primarily plastics were machined. Kdodoy Duinepfx Abgjk

Condition: good (used), Year of construction: 2008, Ref. -No.: 10628 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2008 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Rotary Table (Lxw): 2500 x 2000 mm No. Of Working Stations: 60 Kjdpjy Ed R Rjfx Abgodk Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with -H / V- head Machine can be viewed under power by arrangement