Used Mbp Multi Head Scale for sale (14,276)

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Lhsdpoxrtb Nofx Akqef Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Lhsdpfx Aouf Rw Tekqef Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. Lhjdpfx Aexrtlujkqsf For rental or sale EU-wide.

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm Lhjdpoh Rkhnofx Akqef YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. Lhsdpfx Akeq Nd Rbjqjf 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS Ledpfeyzy T Tsx Akqjhf System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: used, Year of construction: 2017, Mfd. 2017 Configuration: 2-Synchron (Dual Counter-Spindle) Production Hours: 20,000 Overview Well-equipped and maintained INDEX Werke MS22-6 configured for high-precision production, including medical components. This machine features a robust Siemens control platform, dual counter-spindles, and extensive automation for efficient, lights-out capable operation. Control & Technology • Siemens 840D SL CNC control • Dual NCU (Numerical Control Units) • TRANSMIT / TRACYL functions • ARTIS tool monitoring system • 2 additional electronic shaft preparations Configuration & Equipment • 6 main spindles • 2 SCARA counter-spindles Lhodpfsy Abc Eex Akqef • 2 parts catchers with conveyor belt • Bar scrap recuperator • INDEX bar guide system • IEMCA PRA bar loader • Bar feeder interface • Fire protection system Capacity & Performance • Max. bar diameter: 22 mm • Spindle speed: 10,000 rpm • Spindle power: 8.7 / 15 kW • Torque: 10 / 18 Nm Axes & Travels • Total slides: 10 • Main slides travel (X/Z): 62 / 85 mm • Counter-operation slides: 2 • Counter slide travel (X): 62 mm Additional Specifications • Number of counter-spindles: 2 • Counter-spindle speed: 10,000 rpm • Machine dimensions (L x W x H): 3330 x 1830 x 2860 mm • Weight: 5,700 kg • Connected load: 75 kVA Applications • High-precision medical components • Complex turned parts requiring multi-operation efficiency • Ideal for high-volume production environments

Condition: used, Year of construction: 1980, Wickman 1" SN: 17069 Mfd. 1980 Lsdpfx Akjyzkfyjqehf 6 Spindles 1" Capacity Motor and Controls Stock Stand and Reel Chip Conveyor Universal Threading Configured as pictured Recently Reconditioned

Condition: excellent (used), Year of construction: 2024, Mfd. 2024 Lhedpfx Akoyzkbhjqef Chip Blaster High Pressure pump 8 Port Programmable High Pressure Manifold 1000 PSI 12 Port Coolant Manifold with Shut Off Valves Parts Catcher Sub Spindle & Back Working Attachment Spindle Drive Motor: 5.00 Nm (Nominal Torque) Max. Speed: 5000 RPM Feed Motors (X & Z): 2.1 Nm3000 RPM (X Has Break) Travel Z: 7.874″ Stroke Rapid Feed Rate: (Z) : 1000 IPM Travel X: 4.375″ Stroke Rapid Feed Rate (X): 200 IPM Cross Slides Motors: 2.1 Nm, 3000 RPM ( 4th X Motor Has Break) 1st Travel: 2.625″ Stroke 2nd Travel: 2.000″ Stroke 3rd Travel: 7.400″ Stroke 4th Travel X: 1.750″ Stroke 4th Travel Z: 4.062″ Stroke Rapid Speed: 200 IPM Specs to be verified by purchaser

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Pickoff / Back Finish Threading Stock Reel and Stand Chip Conveyor Noise Tamer Sound Enclosure Refurbished and Ready to Run Lsdpeh I Euajfx Akqjhf Several similar machines available

Condition: good (used), Year of construction: 2016, machine/vehicle number: 30339, Wickman 6-57 CNC Multi-Spindle Screw Machine SN: 30339 Mfd. 2016 Siemens CNC control Motors and controls Stock stand and stock reel with enclosure (2) 2-Axis CNC Slides in Pos. 4 and 5 Single Axis CNC Turret Single Axis CNC Auxiliary slides pos. 4th + 5th Turbo Chip Conveyor Machine configured as follows Pos. 1: Mechanical cross slide, Turret open Pos. 2: Mechanical cross slide, Turret open Pos. 3: Mechanical cross slide, Turret open Lhedpfx Aksuzllteqjf Pos. 4: 2-Axis CNC Slide, Auxiliary single Axis Pos. 5: 2-Axis CNC Slide, Auxiliary single Axis Pos. 6: Mechanical cross slide, programable pick-up turret is single axis CNC With (6) Collet tubes Sold as-is where-is condition from current location. Buyer is responsible for shipping and rigging.

Condition: used, machine/vehicle number: 008343, Max. panel width: 70 mm Ledpfx Asx A Tl Nskqshf Lateral horizontal groups: yes

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D 6 Spindles 52mm Capacity Ljdpfjt Rkzwsx Akqohf Equipped as pictured Under power Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Mfd. 2005

Condition: used, machine/vehicle number: 684, Load capacity: 1000 kg Graduation reading: 100 g Platform size: 1250 x 950 mm Platform height above floor: 230 mm Lhsdpfx Aedqw R Rskqef Platform height with elevation from the underbody: 540 mm Space required: 1250 x 1160/1250 x 1900/2180 mm Weight: 270 kg

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 Ljdpfx Akjxnrtcsqehf 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: good (used), Optical dividing head, precision dividing head -Max. tip height: 76 mm -Max. center distance: 200 mm -with collets: 3, 4, 5, 6, 7, 8, 9, 10, 16 mm Lhedpeb A Iqbsfx Akqof -wooden box -Total weight per box: 42 kg Quantity: 1 piece available

Condition: excellent (used), dividing head, dividing head, gear, gears, lathe -Gears: 18 pieces module 1.5 -Teeth: 127/120/89/78/60/58/56/48/45/44/39/38/33 Lodpfx Aox R Sxmokqohf -Tooth width: mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Shipping/Price: complete -Dimensions: Ø 193 to Ø 53 mm -Weight: 14.7 kg/total

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Lhedpfjy Ehrxjx Akqsf Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes Lhsdpfswymlyox Akqef - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: not inspected (used), functionality: unexamined, total width: 1,200 mm, total length: 3,000 mm, total height: 1,500 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Overall length: 3,000 mm Overall width: 1,200 mm Overall height: 1,500 mm Lsdpfxoy D Tl Us Akqshf Machine weight: 2,000 kg External reference: 41

Year of construction: 1970, condition: not inspected (used), functionality: unexamined, overall weight: 2,000 kg, total length: 3,000 mm, total width: 1,200 mm, total height: 1,500 mm, machine/vehicle number: 779, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Lhedpfx Asy D Tkdskqof Diameter: 5.4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,200 x 1,500 mm Machine weight: 2,000 kg External reference: 40

Condition: not inspected (used), functionality: unexamined, pressing force: 50 t, stroke length: 40 mm, overall weight: 3,000 kg, rotational speed (max.): 500 rpm, rotational speed (min.): 100 rpm, No minimum price – guaranteed sale to the highest bidder! Lhjdpfx Asy D Thpokqjf By placing a bid, you commit to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Pressing force: 50 t Ram stroke: 16 - 40 mm Flywheel speed range: 100 - 500 rpm Decoiler diameter: 1,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,000 x 2,200 mm Machine weight: 3,000 kg External reference: 43

Condition: not inspected (used), Year of construction: 1958, functionality: unexamined, machine/vehicle number: 202, wheel diameter: 885 mm, production capacity: 4,200 unit/h, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Maximum bolt diameter: 7.7 mm Maximum thread: M8 Maximum shank length: 90 mm Minimum shank length: 20 mm Output: approx. 35/53/70 pcs/min Flywheel diameter: 885 mm MACHINE DETAILS Dimensions & Weight Lhjdpfoy D Tfhex Akqef Dimensions (L x W x H): 4,000 x 2,000 x 1,500 mm Machine weight: 2,500 kg External reference: 42

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Ljdpfx Akjy D S Unsqshf Weight: 700 kg EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA vibratory feeder (diameter: 800 mm) Lsdpfx Aey D S S Hskqehf External reference: 34