Used Polyamide Assembler for sale (3,126)

Condition: excellent (used), Max. working width: 55 mm Max. working height: 75 mm Min. working width: 24 mm Min. working height: 34 mm Length: 14 m Width: 4 m Very good condition. Hjdpowrcwvjfx Amijl

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Our former assembly cell was only in operation for a few hundred hours (the exact number is unknown) and is no longer needed, as the conversion to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage - apart from the batteries, which need to be replaced. The entire assembly/robot cell has the following dimensions: height: 169cm, width: 175cm (150cm + 25cm), depth: 130cm, weight: approx. 600 kg The most important elements of the assembly/robot cell are as follows: Mitsubishi robot mod. RH-6SH5520-S312, year of manufacture 2010 Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Hsdpfx Amsri S Hkeiel Many details are visible in the photos and in the documents, for everything else we are happy to provide information.

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Hodpjxzug Sofx Amisl Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: excellent (used), Max working width 9000 mm Max working height 1100 mm 6 upper pressing sections, each 1520 mm 18 front clamps Hodpfx Amexnwpieisl Overall width 13000 mm Overall height 2200 mm

Condition: used, Tool assembly stand SK 40 Hjdpferrii Ujx Amiol

Condition: new, Year of construction: 2025, functionality: fully functional, DIRECTLY FROM THE MANUFACTURER – no intermediaries SINGLE-WING ROTARY TABLE with pneumatic drive, 7.5 m long We proudly present our assembly table for prefabrication – a single-wing butterfly table – model ER-01P/750, 7.5 meters in length, specially designed for efficient and precise prefabrication of walls, ceilings, and roofs. Hodpfx Amsl D Nkzeijl CARPENTRY TABLE / JOINER’S TABLE / ASSEMBLY TABLE FOR PREFABRICATION * Pneumatic drive – working pressure 7–9 BAR * Permissible load: 50 kg/m² (e.g., for a 7.5 m table – 1125 kg) * Powder-coated steel construction * 15 mm plywood board * Holes for mounting clamping actuators every 150 mm * Removable locking pins with height adjustment * Modular construction with the possibility of adding additional segments * Option to add transport rollers AVAILABLE IMMEDIATELY – we ship to every country in EUROPE

Year of construction: 1988, condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Moving die length: 95 mm. Die height: 65 mm. Hsdpfelcbkgsx Amijl 230-600ppm. Completely overhauled like new. Machinery visible in Calolziocorte (LC) REVISION ACCORDING TO CE STANDARDS. The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings - Correction of guides or possible replacement - Introducer group revision - New washer assembly group - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell - Revision of the roller evacuation group - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Condition: new, Total height 1500 mm Hjdpjdpbn Aofx Amiel Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

Condition: new, Year of construction: 2026, Assembly robot BEFARD XGR 800.3 Specification: * full remote control - both operation and drive of the device * three hydraulic extensions with a vertical range of 5.55 m * power supply by a combustion engine (optional additional power supply by a 230 V electric engine or Li-ion batteries) * possibility of simultaneous operation from the 230 V mains and battery charging (for the Li-ion version) * two-circuit vacuum system * maximum lifting capacity 800 kg * 8 vacuum suction cups * rotating frame with suction cups (hydraulically) - controlled by the remote control * lateral shift of the frame with suction cups (right, left 10 cm - hydraulically) * tilting frame with suction cups to the sides (relative to the device - manually or hydraulically) * tilting frame with suction cups (possibility of lifting the element from the horizontal plane and verticalizing it - hydraulically) * non-marking tracks * two working modes - fast and slow * color to choose from Optional additional equipment: * HS spacers * valves * frame tilt with suction cups (hydraulic - remote control) * forks * anti-overload system * hook * LED lamp * 230V wired power supply (for the combustion version). Hodsibqr Tjpfx Amijl Other models available: XGR800.1 with one hydraulic extension, with a vertical reach of 3.9m XGR800.2 with two hydraulic extensions, with a vertical reach of 4.75m Gasoline engine - VANGUARD brand 10 HP / 5.5 KW

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, overall weight: 3,000 kg, total length: 10,000 mm, total height: 2,000 mm, total width: 10,000 mm, Equipment: documentation/manual, This machine is used for the automatic production of flat three-layer masks by automatic forming Hedpjudy Acjfx Amiel from non-woven fabric rolls, automatic transfer, with a nose clip and rolled material of a set length cut simultaneously, folding at the edges of the mask, folding and flattening, joining by ultrasonic welding, cutting and forming, ultrasonic welding of loops for ears, etc. - All these processes are done automatically. Main parameters: -Suitable for mask types: Regular three-layer medical mask (disposable medical masks), surgical mask and medical protective mask -Product specification: Mask for adults: 175 mm x 95 mm, optional child mask 165 mm x 95 mm; or 145 mm x 95 mm -Speed: 60 pcs/min -Material: PP non-woven composite fibres (three layers), typically 25 g per square meter -Other materials: Nose clip (3 mm), ear loops (nylon with elastic, usually 3 mm) -Processing method: Ultrasonic welding -Air flow volume: 1700 l/min -Power: 20 KW, 220V/50Hz -Dimensions: 10m x 10m x 2m -Weight: 3000kg Technical features: (1) Self-alignment of three rolls of material fed into the machine, i.e. the outer, filter and inner layer. Continuous symmetrical ultrasound compression of both sides. Continuous pressing with rollers, followed by cutting. The production line branches off into two separate welding machines for attaching ear loops, enhancing line balancing and achieving high productivity. Automatic counting and folding after the ear loops are welded. (2) The production line follows the »1 in 2« principle, which is the core component of the mask production system, distributing two sets in production for to weld the ear loops. (3) Ear loops can be made by automatic cutting and automatic welding with ultrasound. (4) The nose clip can be made by automatic feeding and cutting. (5) The system offers stability, few malfunctions, a pleasant appearance, high efficiency, energy savings and full automation.

Condition: like new (used), Year of construction: 2012, I sell the wooden window assembly table OMGA BA825 (+A+U). Year 2012 Hedpfx Ast Ndz Uomiel All complete. Very good condition. Available immediately.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, input voltage: 220 V, control voltage: 220 V, Equipment: CE marking, High precision, adjustable full automatic oral bottle filling sealing machine . Hjdpjxl Edcefx Amiel

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 16, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-16 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-16 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -16 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 254 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 15 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 14 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 10 hours The number of people required for assembly – 2 people Hedshbduzepfx Amiol DOCUMENTS ATTACHED TO M80-16 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 26, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-26 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-26 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -26 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 384 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 22 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 23 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 8 hours Hedpof S Hh Tsfx Amiel The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-26 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, warranty duration: 12 months, Our company (EXPOGLASS®) manufactures machines, glass racks for the glass industry. Our offer includes a 321 x 255 pull-out glass rack. New product on request. Technical data : Hedpfx Ash Uudvomijl Number of drawers - 30 Size of panes - 2550 X 3210 for storage Load capacity of a single drawer - 1500 kg Loading space width - 80 mm Total storage width - 4460 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - floor friendly polyamide Rear wheel of drawer - steel - turned, bearing-mounted, with double flange, running on steel track We export our products all over the world.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, SLIDING RACK FOR GLASS D220-10 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding racks have the form of slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack in various parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. D220-10 RACK TECHNICAL DATA Intended use – glass panes 321 cm x 255 cm in wooden boxes Possibility of storing single panes – YES Maximum box size – 345 cm x 275 cm Number of partitions – 10 The width of the storage strip for glass – 22 cm The length of the storage strip for glass – 395 cm The material on which glass is placed – steel supports coated with ash tree strips (5 pieces) Total height (A) – 335 cm Total width (B) – 368 cm Total depth (C) – 407 cm Space needed for the correct use of the rack – 29 m2 Requirements for the ground – smooth / levelled The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 full / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single drawer – 2 500 kg Permissible load-bearing capacity of the whole rack – 25 000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 4 people Drawers – joined (in order to reduce transport costs) Loading the box with glass onto the drawer – gantry, forklift, HDS DOCUMENTS ATTACHED TO D220-10 RACK - User’s Manual Hsdpfx Aehcipgemiel - Assembly Instructions - Rating plate - 12 months’ warranty This product is delivered in parts in order to minimise delivery costs. We also deliver our racks to the EU countries and other countries.

Condition: good (used), Technical Data for Shelving Trolley: Hodpfxjxl Sawo Amiel Shelf System: Dexion Type: HI280 Scope of delivery includes: 01x Shelving trolley, used Material finish: Sendzimir galvanized total width with handle: approx. 1,490 mm total width without handle: approx. 1,340 mm total depth: approx. 625 mm total height with castors: approx. 1,965 mm total height without castors: approx. 1,805 mm Number of levels: 3 pcs Number of boxes per shelf: 9 pcs Consists of: 02x Uprights, used Material finish: Sendzimir galvanized Frame profile dim.: 50x55 mm Slot pattern: 25|25 mm incl. base plates (Uprights are pre-assembled) 1,805 mm high 610 mm deep 03x Shelves, used Type: S Material finish: Sendzimir galvanized Dimensions: 1,275x575x30 mm Weight: 4.37 kg each Max. load per shelf: 100 kg (with evenly distributed load) 03x Shelf beams, used Version: for shelves Material finish: Sendzimir galvanized Clear span: 1,275 mm Z-profile: 50 x 25 mm Weight: 0.840 kg each 01x Mesh shelf, used Material finish: Hot-dip galvanized total width (TS): approx. 1,380 mm total depth (QS): approx. 625 mm Mesh size: 75 x 35 mm Load bar: 28 | 1.50 mm 09x Collapsible box, used Material colour: grey Dimensions: 600 x 400 x 400 mm 02x Swivel castor, new Wheel material: polyamide Wheel colour: cream white total height: 130 mm Wheel Ø: 100 mm Wheel width: 35 mm 02x Twin-braked swivel castor, new Wheel material: polyamide Wheel colour: cream white total height: 130 mm Wheel Ø: 100 mm Wheel width: 35 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping required is subject to extra costs, which can be requested separately depending on delivery location and scope of delivery.

Condition: used, Mechanical scissor lift table with roller device - welding positioner, vessel rotator Ideal base for 3D welding table Load capacity 800 kg (maximum load with fixed castors) Load capacity 2000 kg (maximum load without fixed castors) Hodpex U Eh Nsfx Amiol Platform size 1800 x 860 mm Usable lift max. 690 mm Table height - bottom position 770 mm (without top frame) Table height - top position 1460 mm (without top frame) Table height - bottom with locking bolt 830 mm (without top frame) Table height - top with locking bolt 1080 mm (without top frame) Top frame height 80 mm Load capacity of rotator approx. 400 kg Roller spacing / axle spacing 155 to 685 mm Axle distance to top frame 190 mm Roller diameter 100 mm Roller width 40 mm - Scissor lift table is ideal as workbench, assembly fixture, welding table base, or with vessel rotator for pipe welding - Mobile on 4 polyamide rigid castors Ø 125 mm, 2 of which are swiveling with brakes - Height adjustment via trapezoidal screw spindle and hand crank - 4 locking bolts for height adjustment, hole spacing 50 mm - Removable table top with forklift pockets - Roller spacing of polyurethane rollers on rotator adjustable in perforated pattern - Very robust construction made of square profiles with 5 mm to 10 mm wall thickness Required space (L x W x H): 1800 x 860 x 1200 mm Weight without rotator 470 kg Weight with rotator 620 kg Very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 20, warranty duration: 12 months, total height: 2,180 mm, total width: 3,060 mm, total length: 3,170 mm, SLIDING RACK FOR GLASS M80-20 MANUFACTURED IN 2025/ BRAND NEW Hsdpfxof S Hhaj Amiel We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-10 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -20 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 306 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 18 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 18000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-20 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Hjdpfx Asha E S Temiel Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 12, warranty duration: 12 months, total height: 2,280 mm, total width: 2,740 mm, total length: 7,399 mm, fork length: 140 mm, We offer a warehouse for the storage of quartz sinters in a size of 330 cm x 170 cm . Our company designs and manufactures warehouses for various types of slab materials. Technical parameters of the S140-12 sintered particleboard storage rack : Hodsvf Im Rspfx Amiel Number of drawers - 12 Size of sheet - max 1800 X 3450 Load capacity of a single drawer - 1500 kg Width of loading space - 140 mm Total storage width - 2740 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - polyamide not destroying the floor We export our products to over 30 countries worldwide. Please visit

Condition: like new (used), functionality: fully functional, mileage: 500 km, power: 129 kW (175.39 HP), first registration: 04/2025, fuel type: diesel, empty load weight: 3,300 kg, overall weight: 7,490 kg, tire size: 205/70R17,5, axle configuration: 4x2, wheelbase: 2,800 mm, next inspection (TÜV): 04/2025, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 3,000 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, differential lock, fog lights, navigation system, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, winter tires, FUSO Canter 7C18 MAYTEC Roll-off Tipper Payload depending on container approx. 3.8 t 3,500 kg trailer load Chassis warranty 3 years up to 100,000 km from first registration Driver comfort suspension seat with horizontal suspension (standard) Fuel tank 100 L (standard) Traction tires on rear axle (standard) Lane departure warning system (standard) Central locking with 2 remote controls (standard) Overhead storage compartment (standard) Lockable glove box (standard) Immobilizer with transponder (standard) Storage behind the seat (standard) Driver’s seat armrest (standard) Fog lights, halogen (standard) Continuously adjustable instrument illumination (standard) Daytime running lights, automatic (standard) Rear axle stabilizer (standard) Digital tachograph (standard), without tachograph inspection ABS with electronic brakeforce distribution (standard) Spare wheel / spare rim (standard) Electric windows (standard) Electronic Stability Program (standard) Autonomous Emergency Braking System (AEBS) Lane Departure Warning System (LDWS) LED main headlights (LH9) Reversing alarm Light sensor Driver airbag (SA5) (standard) Limited-slip differential lock (A86) Rear underrun protection (C01) Body mounting provisions (CR8) Front license plate holder (C60) Batteries, 2 x 12V /100 Ah, maintenance-free (EE9) 7" touchscreen radio/audio system incl. Apple CarPlay (EF3) Reversing camera Trailer socket 12V, 13-pin (EX5) Heated exterior mirrors (F62) Mirror bracket, medium incl. wide-angle mirror (FM9) Frame cover behind the cab (GU8) Hedpfswd Ttljx Amijl Automatic climate control (H07) Reversing alarm (JW0) Exhaust system cover (KA6) PTO (200Nm, 31kW), operated via vacuum pump, for direct-mount hydraulic pump (NQ7) Engine spec, Euro VI OBD Step E (OM5) Tow bar with ball coupling / 13-pin electric kit (QQ0) AdBlue tank cover (OU3) Construction special equipment (ZT4) Hand throttle (VA6) Mounting and installation of hand throttle (VB1) Canter safety package incl. rubber floor mats (YT7) Valve extensions (YT8) (50,500,--) MAYTEC ROLL-OFF SYSTEM Maytec Roll-off System AR-L55-2 Serial No. A M08-K-2-75NA-2800 Steel construction, sandblasted, primed, and painted Frame and hydraulic cylinders, umbra grey, RAL 7022 Lifting unit, narcissus yellow, RAL 1007 Operation via cable remote control inside cab or beside the vehicle Load-holding valves on all hydraulic cylinders Emergency stop function Maintenance-free guide rollers made of polyamide Automatic locking of superstructures in transport position Low construction height for a low center of gravity Side underrun protection right side 9535 Side underrun protection left side 9534 Full TÜV acceptance P01-001 9301 Aluminium tank cover 9510 Support bracket behind cab with 2 holders for tool cabinets 9530 Aluminium tool cabinets incl. mounting on support bracket (2 pcs) Height 780 mm, depth 500 mm, width 330 mm Intermediate floor for self-assembly 9531 with aluminium angle (21,800 ,--) Optional equipment: Standard drop side body Type 2 – 1980 B No. 0260 3090x1980 mm EURO 4850,--

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Hodpfx Aoy Hki Ajmijl Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Year of construction: 2023, condition: new, SEMIX Compact type concrete batching plants are designed for limited spaces and transportation easiness for overseas countries. SEMIX Compact 30 can fit on a single container and assembled in 3 days completely. SEMIX Compact 30 is equipped with 750/500 liters capacity Concrete mixers which can be a single shaft or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. The robust steel structure maintains long-life performance. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer mechanism. Hedpfjgazk Esx Amiol SEMIX Compact Concrete Batching Plants offers variety in aggregate transfer mechanism. Even in compact batching plants, users can choose either skip hoist mechanism or transfer conveyor for aggregate transfer. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, condition: new, With bolted,welded and horizontal types, silos are used in storing cement,fly ash,bentonite and other bulk materials. Hedpfjgau Uxjx Amiol Welded Silos Welded silos are preferred in low capacities of storage, it can be assembled and operated in 2 hours with one crane. It is preferred in local solutions where transportation costs can be neglected. Semix is able to manufacture welded silos in a range between 50 to 150 tons. Bolted Silos Bolted silos are preferred due to its' compactness for transportation. It can be transported with containers for avoiding freight costs. Because of its modularity, Semix is able to manufacture welded silos in a range between 100 to 2000 tons. Semix provides a mechanical supervisor for assembling the bolted silo correctly. Semix have succeed to install bolted silos in Peru, Israel, Germany and United Kingdom.