Used Thermopers Compact Plastic Waste Baler for sale (12,029)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Bjdpfx Aksx Dnb Uoxolg Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Bjdjx A U Ncjpfx Akxelg Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: ready for operation (used), Year of construction: 2007, punching force: 31 t, total height: 2,200 mm, total width: 5,165 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D CNC, product length (max.): 5,570 mm, number of axes: 2, This 3s Finn-Power C5 + Compact Express CNC punching machine was manufactured in 2007. It features a working area of 2500 × 1250 mm and a punching force of 30 tonnes. With 20 tool stations and a maximum tool diameter of ~89 mm, it offers efficient operation. Consider the opportunity to buy this Finn-Power C5 + Compact Express CNC punching machine. Contact us for further details. • Maximum sheet thickness (steel): 8 mm • Number of tool stations: 20 • Maximum tool diameter: ~89 mm • Table clamps: 3 (typically pneumatic) • Sheet weight capacity: ~200 kg • Traverse speeds: X ~90 m/min; Y ~60 m/min • Table support: vacuum or brush table Bedpfxoyiz Ige Akxslg Additional equipment • Automatic loading/unloading system (automatic material handling, loaders/unloaders) • Chip/slug conveyor belt

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality • Sturdy frame and knife assembly Bodpfovyumyox Akxolg Very good condition, mechanically inspected, ready for operation.

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Blodpedzqnyjfx Akxjg Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: used, Year of construction: 2015, Specification: Model: Forstner Compact Access Pro Bedpfx Aov Ac Anjkxjlg Made in: Austria Year: 2015 Working width: 1250 mm Thickness: 1 mm Ribbed knives: 5 Straightening rollers: 6 Shearing: guillotine Controller: Siemens SPS S1 Pickup: April If you have any more questions, we will be happy to answer them.

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control Bljdpjy H Ibiefx Akxog We do not have any further technical data.

Condition: new, A complete pallet production line. Number/Pos Part no/Name/Quantity 1/OKKR-100/Opti-Cutter Magasin/L=3000mm/1 2/RON120/Block feeder carousel/1 3/OM-1500EL/Leg Machine/1 Bjdpfx Akewduudoxjlg 4/LP-OM/Leg positioning system/1 5/D-1000EL/Deck Machine/1 6/KTR-1006/Chain conveyor L=6000/1 7/GRG/Gantry Robot mechanical Gripper/1 8/SMS-1000EL/Assembly Machine/1 9/HKR/Automatic corner cutting machine/1 10/KTR-1004/Chain conveyor L=4000/1 11/ROB-G/Robot with mechanical gripper/1 Average capacity: 1500 pallets/8 hours (800x1200 mm pallet with max 6 deck boards) Maximum capacity: 1900 pallets/8 hours (800x1200 mm pallet with max 6 deck boards)

Condition: good (used), Year of construction: 2014, lifting height: 11,820 mm, fuel type: electric, Weights Empty weight: 3.175 kg Functional Lifting capacity: 350 kg Working height: 1.382 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,48x1,21 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Compact 14 Year of build: 2014 Condition: Used Blodoy Ev Nxjpfx Akxsg Data: Max. working height: 13,82 m Platform height: 11,82 m Lifting capacity: 350 kg Lifting capacity on extension: 150 kg Platform dimensions LxW: 2,29 x 1,18 m Platform length pushed out: 3,21 m Total dimensions LxW: 2,48 x 1,21 m Height transport position with railing: 2,51 m Height transport position without railing: 1,65 m Movable up to working height: 13,82 m Ground clearance: 0,07 m Drive type: Battery indoor use only: yes Empty weight: 3.175 kg Special features: white tires, anchor points for fall protection systems (PPE) available. Location: 41468 Neuss immediately available

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Length of cut: 3100mm Width of Cut Vertical: 2070mm Width of Cut Horizontal: 1958mm Bljdoyzf E Uspfx Akxog Depth of Cut: 60mm Motor Power: 5.3HP Saw Blade Dia: 250mm Saw Blade Bore: 30mm 400V 50Hz

Condition: good (used), Year of construction: 2020, operating hours: 2,198 h, load capacity: 1,200 kg, lifting height: 5,225 mm, fuel type: electric, mast type: triplex, construction height: 2,321 mm, empty load weight: 3,000 kg, mileage: 2,198 km, Electric triplex forklift Brand: Linde Year of manufacture: 2020 COMPACT MODEL ONLY 2,198 hours Capacity: 1,200 kg Lifting height: 5,225 mm Clearance height: 2,321 mm FREELIFT SIDESHIFT Battery: 2020 Automatic filling system External charger Blsdpfxjy D Un Re Akxog

Condition: good (used), Year of construction: 2018, operating hours: 919 h, load capacity: 1,200 kg, lifting height: 2,424 mm, fuel type: electric, mast type: duplex, construction height: 1,150 mm, empty load weight: 900 kg, mileage: 919 km, Electric stacker Brand: Linde Year: 2018 ONLY 919 hours Capacity: 1,200 kg Lift height: 2,424 mm Clearance height: 1,150 mm Equipped with FREELIFT Maintenance-free gel battery With INTERNAL charger Bjdpey D Unqsfx Akxjlg

Condition: good (used), Year of construction: 2020, operating hours: 3,918 h, load capacity: 1,200 kg, lifting height: 5,475 mm, fuel type: electric, mast type: triplex, construction height: 2,471 mm, empty load weight: 3,000 kg, mileage: 3,918 km, Electric triplex forklift Brand: Linde Blodpfxjy D Umto Akxeg Year of manufacture: 2020 COMPACT MODEL ONLY 3,918 hours Capacity: 1,200 kg Lifting height: 5,475 mm Overall height: 2,471 mm Freelift Sideshift Non-marking tires Battery: 2018 Automatic filling system External charger

Condition: good (used), Year of construction: 2016, load capacity: 1,000 kg, lifting height: 1,540 mm, fuel type: electric, mast type: simplex, construction height: 1,970 mm, empty load weight: 500 kg, Electric stacker Brand: Jungheinrich (Germany) Year of manufacture: 2016 Capacity: 1,000 kg Lifts up to a height of 1,540 mm Overall height: 1,970 mm Equipped with FREELIFT Battery: maintenance-free Supplied with built-in charger Watch the video on YouTube Blodsy D Ulvepfx Akxjg

Condition: good (used), Year of construction: 2012, operating hours: 2,322 h, load capacity: 1,000 kg, lifting height: 5,750 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, empty load weight: 2,800 kg, mileage: 2,322 km, Triplex reach truck Brand: Still (Germany) Year of manufacture: 2012 COMPACT MODEL ONLY: 2,322 hours Overall height: 2,450 mm Lift height: 5,750 mm Features: FREELIFT, SIDESHIFT Blsdpfeyv Dz Dsx Akxog 2012 battery with charger included Automatic filling system

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: KR6 R900-2 AGILUS KRC4 Compact, load capacity: 6 kg, arm reach: 901 mm, controller manufacturer: KUKA, controller model: KRC4 Compact, teach pendant manufacturer: KUKA, input voltage: 230 V, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR6 R900-2 AGILUS Controller: KRC4 Compact Rated Payload: 6 kg Reach: 901 mm 230V General purpose: Floor, Ceiling, Wall, Desired angle. The KR AGILUS sixx is a compact six-axis robot designed for particularly high working speeds, as well as all standard robotic applications. Blodjy D N Rtspfx Akxsg Delivery time: By mutual agreement. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily core business is delivering refurbished A-Brand robots: ABB – KUKA – YASKAWA. Established in 2002. We ship worldwide.

Condition: used, Year of construction: 2007, operating hours: 560 h, 2007 | Haulotte Compact 12 Dx (12m) | Used Scissor Lift | 560 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points 34 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the Scissor Lift, presence of oxidation on metal parts and damaged paint. Impact on the stabilizer protection housing. The movable floor is slightly deformed. Presence of impact on the guardrail at the access level. Left side tires and rims are damaged. The fiberglass protection covers are damaged with the absence of the stay cylinder to hold the engine cover in the open position, and poor maintenance of the cover cylinder, side, hydraulic group. Slight presence of exhaust smoke. Maintenance of the cable at the high control station with tape. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40719 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Bjdpfxoy D Uagj Akxolg ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Used machine Used Ganner Compact 30 line boring machine Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Bedpfxowhuh Ss Akxelg Location: Solingen

Condition: good (used), 58 roll containers, transport trolleys with plastic base – used - : Price per item ex works: only €85 (net) Price for full lot, per item ex works: only €75 (net)! Manufacturer: unknown Model: unknown Year of manufacture: unknown Load capacity: unknown, likely at least 500 kg Dimensions: Width: approx. 75 cm Depth: approx. 70 cm, with handles approx. 77 cm Height: approx. 1.80 m Most trolleys feature a height-adjustable intermediate shelf (wire mesh) 2 push handles Three sides enclosed Condition: good Bjdpfx Aoy D Ttrekxslg Available: immediately Location: Heilbronn

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Blodoy Dp E Djpfx Akxog Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m3 - Mixing and equalisation tanks 2, 40 m3 - Mixing and equalisation tanks 3, 80 m3 - Bioreactor 1, 240 m3 - Bioreactor 2, 240 m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m3 - Secondary sedimentation tank 2, 100 m3 - Thin sludge tank, 70 m3 - Thick sludge tank, 90 m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25 m3 - Various process water pumps Bioreactor capacity 2 x: 240 m3 Operation / Control: Siemens Simatic S7 Bodpsvcql Rsfx Akxjlg Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x sludge dewatering; thick sludge tank

Condition: used, Year of construction: 2015, operating hours: 178 h, machine/vehicle number: CE155617, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2 Bjdpey A D A Iofx Akxelg Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2016, operating hours: 2,799 h, machine/vehicle number: 2010029, Empty weight: 2.190 kg Blodpfx Ajy A Dzwjkxjg Lifting capacity: 230 kg Working height: 1.000 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 2.31x0.81x2.18 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2019, machine/vehicle number: 2071225, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2.01 Please contact PFEIFER GROUP for more information Bledpfx Akoy A Dzkoxsg

Condition: used, Year of construction: 2011, operating hours: 838 h, machine/vehicle number: CE145631, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 40 Bjdey A Dy Tjpfx Akxelg Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2.01 Please contact PFEIFER GROUP for more information