Used Canon Scanner for sale (381)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display Njdpoykub Aofx Akcsla F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: RDX-500-071501, laser wavelength: 532 nm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, type of input current: three-phase, overall weight: 750 kg, total length: 1,500 mm, total width: 1,200 mm, total height: 1,850 mm, feed length X-axis: 300 mm, feed length Y-axis: 300 mm, feed length Z-axis: 100 mm, Equipment: documentation/manual, type plate available, This ultrashort-pulse laser processing station (Pulsar Photonics RDX 500) is currently in operation. It ist used for ablation/patterning of transparent conductive coatings (e.g., ITO) and for precision glass cutting. A system demonstration can be arranged upon request. In its current configuration with an 532 nm (green) laser, the machine is also suitable for applications in the field of microstructuring and micromachining. Our partners can develop the specific parameters for your usecase. The replacement value of this machine is around 415 000 € Scope of Delivery The exact scope of delivery will be confirmed in writing prior to sale. Subject to change. Laser system Pulsar Photonics RDX 500 (base machine) Laser source EdgeWave PX25-2 Control PC with software 2D galvanometer scanner unit with Newson Scanner Controller A2G_CUA01 incl. F-Theta objective PULSAR PHOTONICS CAMERA MODULE CM-R1 for workpiece positioning Camera-based measurement function (for position and reference measurement) 1 tool parameter set for ITO thin-film ablation 1 tool parameter set for glass cutting Additional tool parameter sets can be developed on request Extraction device for ablation particles Vacuum chuck with vacuum pump for fixing flat samples CAM software: Rhinoceros 5.0 incl. PhotonicVectors plugin (licence) Documentation/Manual Nameplate present Accessories as agreed Documentation package Key Technical Data Laser Type Ultra-short pulse laser (USP / Picosecond) Pulse Duration 10 ps Wavelength 532 nm Average Power < 20 W Nljdsx Uzwgspfx Akcoa Repetition Rate 100 kHz – 20 MHz Laser Serial Number SN0702 Machine Serial Number RDX-500-071501 Processing Axes 2.5 axes (X/Y processing + Z-axis for focus/depth adjustment) Scanner Unit 2D galvanometer scanner with Newson Scanner Controller A2G_CUA01 incl. F-Theta objective Processing Area Min. 210 mm x 290 mm (exact dimensions to be specified) Control Software Windows 7 with Photonic Elements (scanner, camera, laser, axes control; CAD-CAM import, live view) and Rhinoceros 5.0 incl. PhotonicVectors plugin for job preparation CAM Software Rhinoceros 5.0 incl. PhotonicVectors Plugin Voltage / Electrical Power 400 V, 5.8 kW Dimensions (L×W×H) 1,500 × 1,200 × 1,850 mm Weight approx. 750 kg Laser Safety Class Laser Safety Class 1

Year of construction: 2016, condition: used, Manufacturer: FELSS, Model: CBC, Year of manufacture: 2016, Serial number: 15-5164B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, Maximum tube length: 1,200 mm, 2 CNC bending heads, PC control with touch display, operator console, double-deck feeder system, loading station, robot manufacturer: Yaskawa, type YR-MA1440/MH12-A00, robot controller type DX200, teach-in terminal, small parts feeder with supply hopper, vibration feed bowl, singling station, unloading/alignment station, crate removal conveyor: length 7,000 mm, crate size 350 x 250 x 150 mm, switch/control cabinets, safety fence/Plexiglas enclosure, staging platforms/racks, label printer manufacturer: CAB, model eos 1, barcode scanner manufacturer: Zebra, model Omni tc15. Nlodpsyx Euqjfx Akcea

Year of construction: 2024, condition: used, Make: AJAX TOCCO, Model: 23-13295, Year of manufacture: 2024, Serial no.: 23-13295, Connected load: 48 kVA, Converter output: 38 kW, Output frequency: 10,000 - 40,000 Hz, PLC system control with operator panel touch, 4 soldering stations, Cooling unit by Hyfra, type Sigma 18-S-RF-P, 2 extraction hoods, control/electrical cabinets, safety devices, 2 load carrier trolleys made from aluminum profile system, inspection table, mobile, 2,500 x 700 mm, 3 tiers, perforated metal wall, skylight, magnifier lamp, label printer by CAB, type EOS1, barcode scanner MDE by Zebra, type Omnii XT15 Nlodpfxeyx Etys Akcja

Condition: excellent (used), O04024) AUTOMATIC BOARD STORAGE SYSTEM for PANELS - SIRIO Nedjwrz Dbopfx Akcjla Total Space Required (with panel saw) mm 10000 x mm 47000 (ca.) Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 150 m/min (ca.) moving carriage speed (on Y axis) 150 m/min (ca.) vacuum suction cup group speed (mobile in Z axis) 60 m/min (ca.) Vacuum suction cup group, 90° rotating Automatic management system (by scanner) of the cut panels (but remaining in the warehouse) O04025) PANEL SAW WITH REAR LIFTING TABLE Mod. FH 6 430 Numerical Control MCS Evolution. Software SIEMENS WinAC RTX Rear pushers (N.) 1 Twin Pusher - DUPLUS2. With No. 12 clamps / grippers Max. cutting width (mm) 4300. Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 135 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 460 / Kw 21 Turning device (rotating unit) at 90° Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system Total power (Kw) 33 (ca.)

Condition: good (used), Horizon BQ-270C Perfect Binder Machine in very good condition. Ready to use. Very low mileage. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Horizon BQ-270C is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. Equipped with a core thickness scanner, it allows for on-demand binding. Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm, with a maximum production rate of up to 500 books per hour. Nljdpfx Aksyy Riiocja Factory-installed cutter with additional scoring knives. Maximum milling depth up to 3 mm. Automatic cover feeding via a suction drum with a secure, consistent alignment with the bound sheets. A factory-installed system creates 4-fold creases on the cover, which automatically adjusts for precise alignment.

Condition: new, Year of construction: 2024, Lights! Camera! Action! This CNC laser machine has a working area of 1600x1000 mm, which is lit by light panels on the sides, and a Canon camera. All for it to majestically operate fabrics, fut, tule, leather, and other materials. Nsdpfxorzrmbj Akcela The camera recognizes and scans contours and shapes, and then transfers them to the computer. In a special program, the operator can make the necessary changes to the drawing and send it for cutting. Easy and convenient. There is no need for a hand-made lingering process. You can give our managers a call for additional details! Wattsan 1610 Cam conveyer characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2200 x 1800 x 1105 mm Packing size: 2300 x 1980 x 1200 mm Weight: 770 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Nlsdsxuvk Eepfx Akcja The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) Nodpfjywg Sbox Akcola - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Nljdpfx Aey Ah Tkjkcea Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). Njdpfxsyzxfnj Akcela URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Year of construction: 2008, condition: excellent (used), Special opportunity! From the federal government's inventory, we can offer you this perfectly maintained "AutoVue Innova" blood analysis system from the global brand Ortho Clinical Diagnostics, with every conceivable extra! The AutoVue Innova is a fully automated blood analysis system used worldwide – primarily for establishing and operating blood banks. It can provide blood typing and a wide range of other data extremely efficiently and has become an indispensable part of any larger laboratory. The system was acquired by the federal government in 2008/2009 and has been continuously tested and maintained. All components are in perfect visual and technical condition and show no significant damage – see pictures. It was taken out of service in 2023 due to a new acquisition and was fully operational until recently. Scope of delivery: - AutoVue Innova blood analysis system - 2 BioVue System centrifuges - 2 BioVue System Heath Block-32 thermoblocks - 3 BioVue System digital multidispenser pipettes Nlodjwh Tn Depfx Akcea - 1 digital incubator thermometer - 9 Low Volume 96 Well Lock Nut Evo tips - 5 Sample Quadrant Blue, 5 Sample Quadrant Green, 4 Sample Quadrant Red - 3 10-place sample holders - 5 Rotor Reagents - 2 Philips spare lamps - 14 Mat Filters - 1 OrthoScan 3.50.C software, 1 TecnoSoft Resolvigen 3 software - 1 ELO touchscreen, 1 METO OS-204 thermal transfer label printer with spare rolls - 1 Zebra TLP 2844 thermal transfer label printer with spare rolls - 1 Epson Perfection 4900 photo scanner Photo, - 2 x Adaptus 3800g handheld barcode readers + 1 x Honeywell Eclipse MS5145 handheld barcode reader - Spare parts and accessories, manuals. Dimensions: 1600 x 900 x 755 mm Weight: approx. 230 kg (AutoVue Innova only) Weight: approx. 320 kg (total weight of all components) Shipping is available for an additional charge within three business days after receipt of payment, insured by a freight forwarder. You also have the option of picking up the device from us during regular business hours. The total weight of the system, including accessories and pallets, is approximately 350 kg, on three pallets. This sale is exclusively for commercial customers; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Nodpfx Aoyz An Tekcela

Condition: new, In general Minimum diameter of the workpieces: 25 mm Maximum diameter of the workpieces :270 mm Minimum width of the side for hexagonal workpieces: 25 mm Maximum width of the side for hexagonal workpieces: 200 mm Maximum stacking height :2 x 350 mm Maximum stacking weight: 2 x 450 kg Width of the automation: 1,902 mm Depth of the automation :740 mm Height of the automation: 2,202 mm Total weight of the automation: 1,000 kg Electrical connection :380 VAC Pneumatic consumption :< 100 L / min Roboter Payload :25 kg / 19 kg net Payload :35 kg / 28 kg net Safety Standard Protection with laser scanner Protection with integrated wall Option Nledpfx Ajh Dw Diekcsa Protection with light barrier Protection with separate grid wall Protection with separate transparent wall Protection with sliding doors

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) Nlsdpfxew Ryt Ds Akcoa - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: X25S52452233, warranty duration: 9 months, type of input current: AC, input voltage: 230 V, overall weight: 52 kg, arm reach: 2,500 mm, number of axes: 7, FARO Quantum Max Arm, X.S, 2.5m, 7 axes (premium model, portable 3D measuring arm) with LLP Price excluding VAT Demonstration unit from October 2024 with manufacturer’s warranty until November 2026 Arm weight: approx. 8 kg; including all accessories, total weight is around 52 kg Serial no. arm: X25S52452233, serial no. LLP: LLP0P2443474, serial no. tripod: 42949 Scope of delivery includes: - FARO Arm Quantum X.S, 2.5m, 7 axes (demo device, 10/2024) - Calibration set - Transport case - Mounting plate - 3mm and 6mm iProbes Nedoymlybjpfx Akcsla - USB cable, power supply, 230V Swiss plug - Rechargeable battery - Laser Line Probe for scanning function, FAROBlu xP including calibration set and case - FARO folding tripod - Manufacturer’s warranty until 11/2026 Optional: FARO software available at extra cost after consultation to meet your needs Quantum Max X.S: This is the premium model, delivering industry-leading precision. It is designed for companies that require uncompromising accuracy and performance for their most critical applications, tightest tolerances, and certification processes. The Quantum Max Arm ensures exceptional accuracy and repeatability, making it ideal for solutions in critical quality control tasks, inspections, CAD comparison, reverse engineering, and as-built documentation. The arm is flexible for use both in production (shop floor) and in dedicated metrology labs. The 7-axis model offered here extends its functionality with an additional rotary axis (often at the arm’s wrist). This seventh axis provides enhanced flexibility and maneuverability, especially beneficial when a laser scanner is mounted to the arm. It enables easier movement of the scanner around obstacles and efficient, complete scanning of complex-shaped surfaces. The Quantum Max Arm is compatible with various probes and laser scanners (the FAROBlu® LP is included in this package), highlighting its versatility for diverse inspection requirements. Its intuitive software and user-friendly hardware allow for quick familiarization and efficient workflows. Custom-fit measurement accuracy: X.S: Industry-leading, highest precision for critical applications and tightest tolerances. Versatile configurations (axes): 7-axis arm: Additional flexibility and maneuverability, ideal for use with mounted laser scanners and capturing complex geometries. Rugged construction: Engineered for reliable operation in harsh industrial environments with integrated protection against temperature, vibrations, and overload. Portability: Lightweight and portable, enabling measurements directly on the shop floor, in the lab, or on-site—reducing transport time and costs. Wide range of applications: Ideal for dimensional analysis, CAD comparison, quality control, as-built documentation, reverse engineering, component inspection, and certification. Compatibility with various probes and scanners: Adapts to specific measurement requirements (touch probes, laser line scanners). Easy operation: Intuitive user interface and ergonomic design for quick training and efficient workflows. Enhanced data quality: Provides detailed and accurate 3D data for well-informed decisions in manufacturing and quality assurance.

Condition: new, Year of construction: 2026, Technical Data Nljdpfjn Sk Huex Akcoa Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN communication, EtherCat, sampling time below 2 ms, correction map, RTCP, remote service access. Working Area: X: 2500–4000 mm, Y: 6000–12000 mm Z-Axis Clearance: 300–700 mm Drive System: Servo drives with EtherCat protocol, X and Y axes with hardened and ground helical racks (accuracy class 6), Z axis with ball screw (accuracy class 5) Linear Bearings: Trapezoidal guide rails Traverse Speed: up to 80 m/min Software Resolution: up to 0.0001 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave with gantry angle correction Electrospindles: 12 kW up to 50 kW powered by inverter Tool Taper: ISO30 or HSK63 ER32 Maximum Electrospindle Speed: 24,000 rpm (optionally 6,000; 40,000; 50,000) Construction: Welded, ribbed, stress-relieved steel frame, precision machined Table Type: T-slot aluminum grid, solid aluminum, or solid steel Equipment Options: - Material positioning and correction via camera, laser, or measuring probe - Linear or turret tool magazine - Tool cooling with oil mist or chilled air - 3D scanner (laser or contact) - Positioning bases - Additional angular/rotary axes - Drilling and angular heads - Pneumatic workpiece clamps - Part marking - Integration with industrial robot - 3D CAD/CAM software - Automatic central lubrication - Automated liquid cooling system #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: new, Year of construction: 2026, Technical Data Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 1 ms, RTCP, remote service access. Working Area: X: 2000-4700 mm; Y: 3000-30000 mm Z-Axis Clearance: up to 3000 mm Drive System: Servo drives with EtherCat protocol; X, Y, Z axes equipped with hardened, ground, helical racks accuracy class 6 Linear Bearings: Trapezoidal rails; quadruple guideway size 35 for Y axis, triple guideway size 35 for X and Z axes Traverse Speed: X, Y up to 25 m/min; C, A up to 6000 degrees/min Program Resolution: 0.0005 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave with gantry angle correction Electrospindles: up to 50 kW Nledpfxswhxcgo Akcea Electrospindle Inverter: Yes Maximum Electrospindle Speed: 24,000 rpm (optionally 6,000 – 40,000) Construction: Welded steel, stress-relieved, precision-machined gantry design Table Type: Modular T-slot (steel or aluminum), separated from the main construction Available Additional Options: 3D printing head Tool cooling Tool changer: linear, mobile linear, turret, or chain type Cutting saws Laser scanner Wireless measurement probe Machining area separators Compensation map Roll-up roof Vacuum table Suction foot for 5-axis heads Dedicated CAD/CAM software 3D granulate printers can process a variety of plastics such as PLA, ABS, PETG, polyamides, or polypropylene. #router #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Condition: used, Year of construction: 2023, functionality: fully functional, workpiece height (max.): 60 mm, HOLZ-HER CNC - Dowel Drilling & Insertion Machine POWER - PIN 7605 Workpiece thickness: 12 - 60 mm Workpiece width: minimum 150 mm (horizontal & vertical processing) Workpiece length: min. 60 mm, max. unlimited (limited when using positioning stops) Software: Campus V8 Power-Pin (1x license) Continuous LED strip for easy orientation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as for untreated dowels when used with white glue Glue application system LS2 with electronic monitoring of the nozzle needle ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal), 3-spindle MOT3 package – motorized adjustment of drilling depth 2D barcode scanner 21.5" touchscreen The POWER-PIN dowel machine is suitable both as a standard dowel machine and as an ideal addition to, for example, nesting or console machines. From cabinet furniture to premium solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. Nodpfeyzg Dfox Akcola The continuous LED strip provides constant machine status indication and assists the operator by showing the correct workpiece position for insertion. The integrated barcode scanner can be used to read DataMatrix codes, for example, which contain all machining information about the workpiece. Drill positions and drilling depths are automatically set and approached by the machine – ensuring maximum precision and efficient operation. The machine has been refurbished at the Voitsberg factory and the software has been updated to the latest version available at the time of refurbishment! Delivery, installation, and commissioning training for the machine can be arranged directly with us at an additional cost. The machine is currently located at our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 36,700 h, Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Tools Type of tool holder HSK63 Additional Equipment Infrared Scanner Tool Measurement Flushing Gun Internal Coolant Supply (IKZ): 40 bar Tank with Paper Belt Filter: 900 litres This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information. Nedsx D Npgepfx Akcsla Application Types Milling

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: SN070, paper weight (min.): 135 g/m², paper weight (max.): 450 g/m², paper width (min.): 210 mm, paper width (max.): 364 mm, paper height (min.): 297 mm, paper height (max.): 750 mm, total length: 4,020 mm, total width: 1,200 mm, total height: 1,800 mm, space requirement length: 4,020 mm, space requirement width: 1,200 mm, space requirement height: 1,800 mm, type of input current: AC, input current: 40 A, input voltage: 240 V, Equipment: documentation/manual, We are offering this used MGI JETVARNISH 3D One digital printing machine, year of manufacture 2019. Voltage: 220–240 V Frequency: 50–60 Hz Short-circuit current rating (SCCR): 10 kA Current: 2×20 A Model: JETVARNISH 3D One Serial number: JVD1-070 Date of manufacture: 12.2019 Year of construction: 2019 Note: We do not provide any warranty for this machine, it is sold as shown in the pictures provided. The machine was stored packaged in a warehouse for two years due to restructuring. Configuration: KONICA MINOLTA PRINTHEADS - Exclusive MGI inkjet technology - Line widths from 0.5 mm possible INTEGRATED INLINE DRYING - On-the-fly drying and curing via integrated LED UV dryers - No additional drying time required - Low energy consumption PAPER DELIVERY - Automatic stacking of prints onto pallets - Minimum format A4 - Maximum format 36.4 x 75 cm DIGITAL ADVANTAGES - Ideal for profitable small and medium print runs - Fast setup - No plates or screens required - Digital varnish form (tiff) required as 5th color - Wide range of substrates possible VARNISHING ON DIGITAL AND OFFSET PRINT SHEETS - Spot varnish directly onto toner (no lamination required for most toners) - Varnishing over offset prints or laminated sheets - Accurate registration by AIS scanner, no register marks needed - Fast and easy digital production - Maximum varnishable area per sheet: 35 x 74 cm VARIABLE VARNISH THICKNESS - Adjustable to individual customer requirements - Maximum 3D effect: 116 μm - Minimum thickness (on laminated surfaces): 21 μm - Minimum thickness (directly on toner): 21 μm SOFTWARE SUITE - On-the-fly job management - Reprint functionality - Image editor - Library of different patterns - Intuitive operation - Time and cost saving OPTICAL SHEET CONTROL - Artificial Intelligence Smart Scanner - Precise registration - Sheet skew and misalignment correction - 300 individual reference points per sheet - Individual correction for each sheet - No marks needed (if contrast is sufficient) - Fast, straightforward setup MEDIA HANDLING - Paper weights from 135 gsm up to 450 gsm - UV spot varnishing directly on digital prints without prior - Full surface varnishing or lamination (not with all toners) ENVIRONMENTALLY FRIENDLY - Varnish in closed loop system - No cleaning required between jobs - No wastage between jobs - Reduced paper, varnish, and energy consumption DIMENSIONS - 4.02 x 1.2 x 1.8 m (L x W x H) - 1 meter clearance required on all four sides - Weight approx. 1,200 kg ELECTRICAL DATA - 7.5 kW (32 A), operating temperature: 18 to 30°C - Relative humidity: 30 to 50% (non-condensing) Included: - Corona charging unit - Required for processing prints from various toner systems - VDP barcode scanner If you have any questions or require further information, please feel free to send us a message or call us. Note: We do not provide any warranty for this machine. Nodpoyypcnjfx Akcsla

Condition: reconditioned (used), Year of construction: 2015, number of ink cartridges: 4, Equipment: auto duplex, brochure finisher, raster image processor, FOR SALE ON A BEST OFFER, all together. A SET OF 6 RISO COMCOLOR 3110/7150/9150 on mix configurations as follows: 1. CC7150 + BIG FINISHER + SCANNER + IS950C CONTROLLER ( 5.3M BLACK + 1.09M COLOR) 2. CC7150 + BIG FINISHER + SCANNER + IS950C CONTROLLER (982K BLACK + 1.26M COLOR) 3. CC7150 + RIGHT EXIT + SCANNER (1.12M BLACK + 1.29M COLOR) Nedpfx Akjy Avx Uscjla 4. CC7150 + SMALL FINISHER + SCANNER ( 1.035MBLACK + 70K COLOR) 5. CC9150 + HIGH CAPACITY FEEDER 4000 SHEETS + HIGH CAPACITY STACKER 4000 SHWWTS + IS950C CONTROLER (6.5MBLACK + 2.6M COLOR) 6. CC3110 + SCANNER (2.3M in TOTAL) All the mahines working perfect , no issues. Do not hasitate to contact us for more information.

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m, Nlodpfx Aksxgt U Eocoa

Year of construction: 2025, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 Nlodpfsuia Dqox Akcja - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Year of construction: 2015, condition: ready for operation (used), This TELSONIC TelsoSPlice TS3-6 P3.6 wire welding sytem was manufactured in 2015. It features a 15" SVGA touch screen, a pneumatic unit, and a 3.6kW WeldHead. The machine includes a barcode scanner, keyboard, and a spacious 2000 x 1000 mm table. Consider the opportunity to buy this TELSONIC TelsoSPlice TS3-6 P3.6 Table. Contact us for more information about this machine. • System: TelsoSplice Plus • Technology: Ultrasonic wire splicing / wire compaction • Application: Ultrasonic welding of wire strands for splice production and compaction • Material Capability: Bare copper wires • Restriction: Wires must not be tinned • Plastic Welding Capability: Not suitable for plastic welding • Total Welding Counter: 1490 welds • Recorded Welds / Compactions: approx. 490 • Ultrasonic Frequency: 20 kHz • Ultrasonic Power (Welding Tongs): 3 kW • Generator Power: 3.6 kW • Amplitude Accuracy: Stabilized ±3 % • Wire Cross Section Range: 0.26 mm² – 40 mm² • Cylinder Force at 6 bar: 1750 N • Cylinder Force at 7 bar: 2040 N • Insertion Stroke (Opening): 19 mm / 10.5 mm • Maximum Tool Torque: 20 Nm • Maximum Air Supply Pressure: 10 bar • Maximum Operating Pressure: 7 bar • Compressed Air Quality: ISO 8573-1:2010 [2:3:2] • Pneumatic Connection: Pneumatic hose Ø8 mm • Voltage Supply: 3 × 400 V / 230 V • Power Supply Type: 3LNPE • Frequency: 50 – 60 Hz • Nominal Current: 3.3 A • Maximum Peak Current: 6.0 A eff • Power Factor: cos φ > 0.95 • Minimum Line Protection: 3 × 13 A slow-blow • Protection Class: IP20 • Control System: SPC Module-4 • Operating System: Windows Embedded Standard 7 • Touch Panel PC: 15" SVGA Touchscreen • TelsoSplice Software Version: 3.5 • Version: 3.5.50929 • Microsoft Framework Version: 4.0.30319.34209 • Ultrasonic Generator: MAG • Generator Output Power: 3.6 kW • Weld Head: TS3-6 • Power Cable: 3 × 400 V / 230 V MAG/SPC-4 • Power Cable Length: 3 m • Pneumatic Unit: TelsoSplice TS • Adapter / Power Cable: MAG/SPC-4 • Rack Housing: 19" 8U • Emergency Stop: TelsoSplice Table E-Stop • Foot Switch: TelsoSplice Foot Switch • Barcode Scanner: Manhattan CCD Long-Range • Keyboard: US Layout • Key Set: TelsoSplice Key Set • Cable Set: TelsoSplice Table / Standing Version • Machine Table: TelsoSplice Table L • Table Size: 2000 × 1000 mm Nodpfxex D E A Ao Akcela • Complete System Weight (Table Version): approx. 103 kg • Operating Temperature Range: 10 °C – 40 °C • Humidity Range: 20 % – 80 % (non-condensing)