Used Danfoss Sva-St65D for sale (208)

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Motor power: 1,1 + 1,5kw Table tilt (Motorized): Tilt speed 0.67 rpm Lrsdjuf Nm Hspfx Akqjk Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Lsdpfx Aouf A Ahjkqork Motor power: 1,1 KW Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Control unit with 6 meter extension pole and digital display with the speed of rotation.

Condition: new, load capacity: 5,000 kg, rotary table diameter: 1,500 mm, pivoting range: 120 °, Capacity: 5,000 kg Max. height center of gravity: 300 mm Max. center of gravity eccentricity: 200 mm Ljdpfx Aeuf Nu Rekqerk Table diameter: 1.500 mm Motor power: 2,2 + 3kw Table tilt (Motorized): Tilting speed 0.14 rpm Rotation speed: 0.05 - 0.5 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 300 kg, rotary table diameter: 600 mm, Capacity: 300 kg Max. height center of gravity: 200mm Ljdpfx Ajuf Nk Eekqerk Max. eccentricity center gravity: 150mm Table diameter: 600 mm Motor power: 0,37kw Table tilting: Manual, by handwheel Rotation speed: 0,1 - 1,0 rpm Manual operation: By foot pedal (right and left hand rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-90 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 100 kg, rotary table diameter: 400 mm, Capacity: 100kg Max. height center of gravity: 150mm Ljdpfx Akjuf Niujqerk Max. eccentricity. center of gravity: 100mm Table diameter: 400mm Motor power: 0,2kw Table tilt: Manual, by handwheel Rotation speed: 0.4 - 4.0 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0 - 90 Inverter: Danfoss Electrical components: Schneider

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: 0.75 L GDB bottle (height approx. 295 mm) Crate formats: 12-bottle Pool N2 crate (400 × 266 × 333 mm) 12-bottle individual crate (395 × 295 × 355 mm) Crate transport: Cross-flow crate transport Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: Length: 2,700 mm Width: 1,400 mm Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: Danfoss frequency converter Standard electrical configuration Additional equipment: Cap transport system Blower unit Technical documentation available Condition: Used Availability: On request Lrjdpoytphcofx Akqjk

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 with aluminum flatbed and loading crane, available immediately. The vehicle is for rent with an option to purchase. Chassis: Fuso 3S15 Canter - GVW: 3,500 kg, payload (complete vehicle with crane and aluminum flatbed) approx. 600 kg - Manual transmission - Limited slip differential - 2 x 100 Ah batteries - 3,500 kg ball hitch trailer coupling with factory-installed wiring kit - Heated exterior mirrors - Automatic climate control - Radio pre-installation - Reversing warning system - PTO with increased rpm - Battery and AdBlue tank covers - Prepared for battery isolator relay - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: - Interior: 2,720 mm x 1,820 mm x 400 mm (L x W x H) - 18 mm floor plate - Floor frame with airline tracks all around - Airline track also in the front bulkhead - Aluminum anodized side panels with fold-out step, easy to remove - Tool/storage box - Work lights - Other flatbed dimensions available upon request Loading crane: with 3 hydraulic extensions (country of manufacture: Italy) - Lifting capacity (manufacturer specs): Max. 995 kg. 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - Manufactured according to CE directive (EN 12999) - Slewing range 370° (slew limiter 190°) - All hydraulic cylinders double-acting - Hard-chromed piston rods - Pressure relief and load-holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 l) with filter, mounted at crane base - Outriggers extendable on both sides, special support, support width 3.10 m - Hydraulic outriggers swiveling 30° and 180°, CE compliant, incl. M.O.L. - Load hook and fastening brackets - On-board power supply 12V - Electronic modules for Danfoss S800 control block (4 functions) - Danfoss S800 control block, 5 functions incl. high-pressure filter Lredpfjwrivlsx Akqek - Special outriggers, support width 3.10 m (1 pc) - Surcharge for shortened support legs by 80 mm - Mechanical boom extension N, 1.30 m stroke (7.0 k) - Stainless steel bolts and pipe clamps - Dinitrol treatment (cavity protection) - Zinc primer - Switch for work lights near the control block (factory-installed) - LED work light on knuckle boom (factory-installed) - LED for 2 support legs Optional: Rear view camera with Carplay, spade holder, 90° rope, ladder rack/transport frame for front or rear wall, additional tool/storage box available Errors and prior sale excepted... A/C, automatic climate control, VAT deductible, ABS, electronic immobilizer, central locking with remote control, tow bar, power steering, spare wheel, day cab, crane, new vehicle, emission standard: Euro 6, diesel, rear-wheel drive, excellent condition, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rental option, particulate class: 4 - Green.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 656.5 kW (892.59 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,148 kg, input voltage: 400 V, total width: 2,260 mm, total length: 6,260 mm, total height: 2,570 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA NX2 G06/K 0706 656.5 kW Cooling capacity: 656.5 kW / 186.67 tons (12/7 — 35°C) Lsdpfx Ajyzzzlskqsrk Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 5 pcs. Danfoss DSH485C4APC (scroll) + 1 pcs. Danfoss DSH600B4APC (scroll) Type of refrigerant: R454B Number of fans: 12 pcs. (EC-fans) Dimensions: 6.26x2.26x2.57 m. Weight: 5148 kg. Working hours: 0/0/0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2011, functionality: fully functional, cooling capacity: 161 kW (218.90 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,500 kg, input voltage: 400 V, total width: 2,300 mm, total length: 3,620 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller TRANE ECGAN600 161 KW Cooling capacity: 161 kW / 45.78 tons (12/7 — 35°C) Year of manufacture: 2011 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHA150KE (scroll) Type of refrigerant: R407с Number of fans: 6 pcs. (2 pcs. frequency inverter driven) Dimensions: 3.62x2.3x2.3 m. Weight: 2500 kg. Working hours: 18195/18195/14900/14910 h. Condition: Good Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Lrsdeyzzxqopfx Akqsk After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Detachable platform body, Jost fifth wheel coupling, fully clad in stainless steel (V2A) Commercial tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side exhaust silencer, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left 35 l AdBlue tank capacity, right Air compressor, 1 cylinder, 360 cc, with fuel-saving system Pneumatically controlled air dryer Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN diesel engine D2676 LFAX, 382 kW (520 hp), 2,650 Nm torque, Euro 6e Heated fuel filter, for fuels up to cleanliness class 25 Fuel pre-filter, with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as option at extra charge) Unlimited slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle boom system with PROLINK (overbending offset boom by up to 12°) Electronic overload protection with FX900 FASSI stability control FSC incl. LMB II Emergency stop, with optical alarm (90% and 100%) Pressure limiting and load holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and pressure value display (in bar and %) and 90%/100% warning on display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied piped Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base Hydraulic outriggers, extendable on both sides, support width 8.84 m Supports operated via radio with proportional control block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Lrsdswllmmspfx Akqok Standard color RAL 3020 traffic red - all cylinders painted black Load hook and mounting clevises (short / 500 mm) Travel position: boom folded transverse to vehicle direction Note: Observe onboard voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 connection box Low profile foundation 180° hydraulically upward-and-outward swinging support legs / both sides Control system for auxiliary function - winch / xhe-dynamic Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work lights operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LEDs for 2 support legs, not mounted (crane) LEDs for 2 support legs, not mounted (additional outriggers) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS Radio remote control V7 RCS Fassi radio remote control V7S: available with 6 or 8 functions, with linear levers or joysticks. V7S with 4.3" color display / 24bit – 480 x 272 px, with 8 push buttons Engine start/stop, speed up/down, 6 x ON/OFF functions, 10m cable and various working speed regulations, incl. spare battery, charger, neck and waist belt

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Lrsdpfx Aerz R Arjkqok Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally available with F705, F805, F905 incl. L436 Fly-Jib and V20 winch!!! TipMatic – Automatic Transmission 8x2 Three steered axles STEERED / LIFT axle Front support approx. 14,000 KG Platform body with drop sides 6200x2550x600 mm Access steps Checker plate flooring Removable drop sides 9 x LED lighting units Extendable overwidth markings to 3,500 mm Start/Stop Amber beacons 8 x stake pockets 6 x lashing rings 6500 daN Toolboxes Towing hitch (AHK) Ledpfx Aoyxa Dtjkqjrk Storage compartments Utility boxes 20-foot container locks Perforated side profile with lashing rings 2500 daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, wire winch, cross-format radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory package for winch operation, folding pulley, quick coupling between main boom and fly jib, and much more... TECHNO SERIES!! NEW CRANE model Infinite slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Dual knuckle lever system with PROLINK (overbending jib up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical warning (90% and 100%) Pressure limiting and load-holding valves XF-System (Extra Fast) + XP-System (Extra Power) + FL-System (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on display Danfoss D900 control block with 4 control valves mounted to crane pillar Emergency manual control for crane functions High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted to crane base Hydraulic support legs, hydraulically extendable on both sides, support width 10.00m, support can be operated via remote control Standard color RAL 3020 traffic red – all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Load hook and mounting bridles (short/500mm) Travel position: folded transversely to driving direction Note: Observe on-board voltage / 12V or 24V, standard is 24V FASSI stability control FSC-TECHNO Fassi V7S remote maxi – 8 linear levers Proportional control block for support legs 180° hydraulically tiltable outriggers – both sides Preparation for operation with variable displacement pump (LS) Control system for 2 additional functions with 2 hose guides / hxp-techno Auxiliary jib (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for jib, fitted for 2 functions Control system for auxiliary function (winch) Winch type V20 – 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently installed rope guide rollers for operation with auxiliary jib AWC – (Automatic Winch Control) for crane – automatic winch management AWC – (Automatic Winch Control) for JIB – automatic winch management Work lights operable via display or remote 1 LED work light fitted to knuckle boom 1 LED work light fitted to jib LED for 2 outrigger legs, not fitted (crane) LED for 2 outrigger legs, not fitted (auxiliary support beam) Electrical rotary manifold with 14 slip rings 1 zinc primer from 720RA to F820RA Zinc primer for JIB “L42” Additional cost for Dinitrol application (cavity protection) Additional cost for stainless steel

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally available with F705, F805, F905 incl. L436 Fly-Jib and V20 winch!!! TipMatic – Automatic Transmission 8x2 Three steered axles STEERED / LIFT axle Front support approx. 14,000 KG Platform body with drop sides 6200x2550x600 mm Access steps Checker plate flooring Removable drop sides 9 x LED lighting units Extendable overwidth markings to 3,500 mm Start/Stop Amber beacons 8 x stake pockets 6 x lashing rings 6500 daN Toolboxes Towing hitch (AHK) Storage compartments Utility boxes 20-foot container locks Perforated side profile with lashing rings 2500 daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, wire winch, cross-format radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory package for winch operation, folding pulley, quick coupling between main boom and fly jib, and much more... TECHNO SERIES!! NEW CRANE model Infinite slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Dual knuckle lever system with PROLINK (overbending jib up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical warning (90% and 100%) Pressure limiting and load-holding valves XF-System (Extra Fast) + XP-System (Extra Power) + FL-System (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on display Danfoss D900 control block with 4 control valves mounted to crane pillar Emergency manual control for crane functions High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted to crane base Hydraulic support legs, hydraulically extendable on both sides, support width 10.00m, support can be operated via remote control Standard color RAL 3020 traffic red – all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Load hook and mounting bridles (short/500mm) Travel position: folded transversely to driving direction Note: Observe on-board voltage / 12V or 24V, standard is 24V FASSI stability control FSC-TECHNO Fassi V7S remote maxi – 8 linear levers Proportional control block for support legs 180° hydraulically tiltable outriggers – both sides Preparation for operation with variable displacement pump (LS) Control system for 2 additional functions with 2 hose guides / hxp-techno Auxiliary jib (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for jib, fitted for 2 functions Control system for auxiliary function (winch) Winch type V20 – 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently installed rope guide rollers for operation with auxiliary jib AWC – (Automatic Winch Control) for crane – automatic winch management AWC – (Automatic Winch Control) for JIB – automatic winch management Work lights operable via display or remote Lredpfx Aksyw Dk Isqsk 1 LED work light fitted to knuckle boom 1 LED work light fitted to jib LED for 2 outrigger legs, not fitted (crane) LED for 2 outrigger legs, not fitted (auxiliary support beam) Electrical rotary manifold with 14 slip rings 1 zinc primer from 720RA to F820RA Zinc primer for JIB “L42” Additional cost for Dinitrol application (cavity protection) Additional cost for stainless steel

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,895 kg, maximum load weight: 605 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 aluminum flatbed with loading crane available immediately; the vehicle is available for rental with a purchase option. Chassis: Fuso 3S15 Canter - GVW 3,500 kg; payload of finished vehicle with loading crane and aluminum flatbed approx. 600 kg - Manual transmission - Limited-slip differential - Batteries: 2 x 100 AH - Towbar with ball head, 3,500 kg incl. factory-fitted electrics - Heated exterior mirrors - Automatic climate control - Radio pre-wiring - Reversing warning system - PTO with rpm increase - Battery cover and AdBlue tank cover - Prepared for battery cut-off relay - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: - Internal: 2,720 mm x W 1,820 mm x H 400 mm - 18 mm floor panel - Floor frame with airline rails all around - Airline rail in the bulkhead - Drop sides aluminum anodized with folding step, easily removable - Storage box - Work lights - Other flatbed sizes available Loading crane: with 3 hydraulic extensions (Country of manufacture: Italy) - Lifting capacity (per manufacturer): max. 995 kg; 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - Design according to CE Directive (EN 12999) - Slewing range 370° (slewing range limited 190°) - All hydraulic cylinders double-acting - Pistons rods hard-chromed - Pressure relief and load-holding valves - Emergency stop - Control block with 5 spool valves - Separate hydraulic tank (33 l) with filter, mounted on crane base - Outriggers extendable on both sides, special supports, support width 3.10 m - Hydraulic outriggers swiveling 30° and 180° – CE, incl. M.O.L. - Load hook and fastening brackets - On-board power supply: 12V - Electric modules for Danfoss S800 control block, 4 functions - Danfoss S800 control block, 5 functions incl. high-pressure filter Ljdsywzygopfx Akqerk - Special supports, support width 3.10 m, quantity: 1 piece - Surcharge for shortened support legs by 80 mm - Mechanical jib extension N, lift 1.30 m (7.0 k - Stainless steel bolts and stainless steel pipe clamps - Dinitrol treatment (cavity protection) - Zinc primer - Switch for work lights near control block, factory-mounted - LED work lights on knuckle arm, factory-fitted - LED for 2 support legs - Options: Reversing camera with CarPlay, spade holder, 90° rope, ladder rack/transport frame bulkhead or rear wall, additional storage box available. Errors and prior sale excepted. ... Air conditioning, climate control, VAT deductible, ASR, ABS, on-board computer, front power windows, electric immobilizer, central locking with remote, tow bar, power steering, locking differential, spare wheel, twin tires, cab: short distance, electric windows, work lights, crane, new condition, emission class Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, for rent, low emission sticker: 4 - green, reversing camera.

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Lrodsyb Rpdopfx Akqsk Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 77 kW (104.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,400 kg, input voltage: 400 V, total width: 2,100 mm, total length: 2,600 mm, total height: 2,350 mm, warranty duration: 6 months, heating capacity: 87 kW (118.29 HP), Aircooled chiller/Heat pump DAIKIN EWYQ080 DAYN 77 kW/87 kW Cooling capacity: 77 kW / 21.9 tons (12/7 — 35°C) Heating capacity: 87 kW / 24.7 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss SJ180B4ABE (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. Dimensions: 2.6x2.1x2.35 m Weight: 1400 kg Working hours: 11860/11861 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available Ljdpfx Akjyymh Ueqsrk - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz Lredpfsdzqn Dox Akqok - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Complete hydraulic system Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys Ledow E Ei Uspfx Akqerk 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift

Condition: new, functionality: fully functional, power: 9.56 kW (13.00 HP), fuel type: diesel, operation weight: 1,200 kg, lifting power: 400 kg/m, drive condition: 100 %, chain condition: 100 %, emission class: euro5, digging bucket width: 500 mm, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, hammer hydraulics, hydraulics, onboard computer, rubber tracks, standard shovel, SHANTUI SE12 – THE COMPACT POWERHOUSE The ultimate 1.2 ton mini excavator for professionals who expect more! With the KUBOTA D782 engine, state-of-the-art Danfoss hydraulics and unbeatable features, the Shantui SE12 defines the top class. Maximum performance, compact dimensions and extreme versatility – your new partner for every construction site! Vehicle No. 1414-G ----- YOUR TOP OFFERS: HIGHEST PERFORMANCE AT THE BEST PRICE Shantui SE12SR Standard (with bucket directly on the arm): €13,500 net (€16,065 gross) Shantui SE12SR with MS01 quick coupler + 40 mm bucket: €13,999 net (€16,658.81 gross) Shantui SE12SR with MS01 quick coupler + bucket package (250 mm, 400 mm, 800 mm slope bucket): €14,999 net (€17,848.81 gross) Commercial customers benefit from hire purchase and financing options! ----- WHY THE SHANTUI SE12 MAKES YOUR JOB EASIER PERFORMANCE THAT IMPRESSES: Engine power that is unrivaled: KUBOTA D782, 3-cylinder, water-cooled, Euro 5 compliant - usually installed in 1.8-ton models. 13 HP (9.8 kW) at 2300 rpm - for strong and reliable performance even in the most difficult conditions. ⚙️ PRECISION THROUGH PREMIUM HYDRAULICS: Danfoss components: High-quality control blocks, swivel motors and anti-swing motors for millimeter-precise control and maximum durability. Lredpfevvk Ilex Akqok Hydraulic flow of 10.6+10.6+10.6 L/min: Outstandingly powerful for efficient work. ️ COMPACT & FLEXIBLE – THE MASTER FOR NARROW CONSTRUCTION SITES: Unique dimensions: width of just 830 mm (retractable up to 1000 mm). Maximum agility: rear swing radius of just 700 mm and a travel speed of up to 3.5 km/h. SUPERIOR POWER AND VERSATILITY: Tearing force: bucket 10.4 kN, arm 5.4 kN – one of the strongest in its class! Amazing reach: digging depth up to 1837 mm, excavation height up to 3017 mm – perfectly equipped for every requirement. ----- THE SHANTUI SE12: PERFORMANCE, QUALITY, VERSATILITY Available in black, red and yellow. For commercial customers: Flexible financing options and hire purchase directly from us. The Shantui SE12 is built to make your construction sites easier, more efficient and more productive. Compact, powerful and durable - it leaves the competition behind! ----- CALL NOW AND TRY IT OUT! Experience what makes the Shantui SE12 so unique - performance on a new level!

Condition: new, fuel type: diesel, color: yellow, operation weight: 2,000 kg, chain condition: 100 %, emission class: euro5, Year of construction: 2026, Equipment: UVV, additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, standard shovel, NEW: Shantui SE20 Mini Excavator (2.0 t) Premium features at a great price – Now available for pre-order at Bagger2go! The brand-new Shantui SE20 is here! Compact, powerful, and equipped with high-quality features – ideal for gardening and landscaping, civil engineering, construction companies, and rental companies. Impressive technology: • Engine: Kubota D902 – powerful, reliable, and low-maintenance • Rotator: Original Danfoss – proven quality • Hydraulics: Hengli components – robust and efficient • Chassis: hydraulically adjustable from 99 cm to 130 cm – ideal for narrow access routes • Articulated boom: maximum flexibility even in confined spaces Ledpfxswg Etij Akqerk • Two speeds: precise maneuvering or fast routes • Hydraulic control: AUX 1 & AUX 2 digitally controlled – flow rate precisely adjustable • Control: Proportional joysticks with rocker switches – intuitive and precise operation Your advantages: • Secure your order now – special conditions for a limited time only • Lease-to-own available – we offer flexible financing solutions • Directly from Bagger2go GmbH – your partner for compact construction equipment

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Lredpfxsvw A T Ns Akqjk Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: used, Year of construction: 2009, negative pressure: 16,000 Pa, filter area: 40 m², volume flow: 5,800 m³/h, RUWAC dust extractor, extractor, dust collector, vacuum filter, self-cleaning, dust collector for extraction of metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and efficient collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Thanks to the wide performance range, these devices are perfectly suited for almost all applications applications - both as a single-station solution and as a central solution. All dust collectors are equipped with large-size filters for dust class M. The unit in the version with dust explosion protection (ATEX zone 22) - EX II 3D , T= 70 °C Lredpfx Akotqt Uxjqok The high-pressure fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pocket filter cartridge - multi-pocket (area of 40 m2) 20 Kw fan. The unit has a frequency converter (Danfoss VLT). Capacity 5800m3/h Vacuum 16,000 Pa Electromotive cleaning of the filter by means of vibrating motors. Complete with dispenser (for sticky dusts) for automatic addition of filter additives to protect filter cartridges. Inlet diameter - 300 mm

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter Lredpfx Akeywuzweqok - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2008, Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  Capacity: 10,200 bph Working hours: ~50,000 h Formats: Neck finish: 29/21 (can be modified to 1881 or others) Preforms used: R-PET by Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Kosme linear oven 8 heating modules Kosme preform tipper with conveying system Kosme preforms feeding rail Kosme electrical cabinet Kosme Danfoss VLT drive Kosme touch screen control panel Set of spare parts (list on request) Service history: Kosme FBA maintenance Complete Kosme service in October 2024 Ongoing service by in-house technicians Scope of Delivery  Stretch blow-moulder KOSME KSB 6R Preform tipper with conveying system Preform feeding rail Electrical cabinet Drive and control panel Spare parts list (on request) Ljdpoyb Tbisfx Akqerk

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 34,900 mm, total length: 9,290 mm, - Drehbarer Teleskopstapler RTH 6.35 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 34,90 m - Drehung 360 Grad (durchgehend) - Motor: Typ Volvo TAD 583 VE, Stage V - Nennleistung 175 kW (238 PS) bei 2.300 U/min - Max. Drehmoment 975 Nm bei 1.380 U/min - Hubraum 5,13 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 152 kN - Steigfähigkeit 65% - Wenderadius (mit Gabelzinken) 7.000 mm - Dieselkraftstoff 270 l - AdBlue 40 l - Hydrauliköl 220 l -Motoröl 16 l - Kühlflüssigkeit 40 l - Max. Betriebsdruck 350 bar -Anlagentyp Load sensing - Betriebspumpe Danfoss / Rexroth Verstellpumpe Lredpfx Akjydqw Hoqjk - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss Elektroproportionalventil SIL 2 - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtunf - Steuerung mit CAN-Bus-Technologie