Used Mortisers for sale (241)

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm Ljdpfxjw D Awmj Akqork mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Lredpfxou Nfmys Akqsk Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Technical details: Lrodpfeu Nflijx Akqek pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm Lsdpfx Akovc Awxjqerk height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: new, functionality: fully functional, The CU 260 FS is a multifunctional woodworking machining center that dramatically increases production capabilities even in workshops with limited space. This powerful and innovative machine is not just a combination of devices, but a complete integrated solution, replacing several machines and offering the full range of essential operations: planing, cutting/sawing, milling, and drilling/mortising. The main advantage of this model is the use of a spiral cutter block with replaceable carbide knives, which reduces noise levels by around 50% and extends the sharpness over 20 times compared to a classic straight-knife cutter block. Technical Specifications Voltage: 400 V Dimensions - width: 1600 mm Dimensions - depth: 2340 mm Dimensions - height: 1150 mm Weight approx.: 456 kg Planer Planing width: 250 mm Cutter block speed: 4,000 rpm Working height: 865 mm Number of knives: 24 pcs. Cutter block diameter: 75 mm Planer fence: 720 x 130 mm Fence tilt range: 90° - 45° Maximum chip thickness: 5 mm Motor power: 2.8 kW Motor power S1 100%: 2.0 kW Planer table length: 1,090 mm Thicknesser Thickness table length: 600 mm Thickness planing width: 250 mm Clearance - minimum material height: 5 mm Clearance - maximum material height: 185 mm Maximum chip thickness: 1.8 mm Feed speed: 8 m/min Extraction port diameter: 100 mm Drilling/mortising unit (CWM 250 series - optional) Drilling table size: 370 x 150 mm Westcott drill chuck: 0 - 16 mm Drilling depth: 90 mm Drilling width adjustment: 160 mm Height adjustment: 85 mm Extraction port diameter: 100 mm Circular saw Table size - width: 900 mm Table size - depth: 345 mm Working height: 865 mm Table extension: 600 x 460 mm Sliding table length - panel/roller: 1,600 mm Sliding table width - panel/roller: 240 mm Sliding table, carriage type: Panel Crosscut length / table travel: 1,600 mm Blade size: 250 x 30 mm Cutting height at 90°: 80 mm Cutting height at 45°: 60 mm Cutting width with guide: 910 mm Main saw blade speed: 4,750 rpm Extraction port diameter: 100 mm Motor power: 3.0 kW Motor power S1 100%: 2.2 kW Spindle moulder Spindle diameter: 30 mm Height adjustment: 110 mm Table opening: 170 mm Clamping length: 90 mm Max. profiling tool diameter: 150 mm Max. tenoning tool diameter: 150 mm Spindle speed min.: 1,400 rpm Spindle speed max.: 8,000 rpm Number of speed steps: 4 (1,400 / 4,000 / 6,000 / 8,000) Extraction port diameter: 100 mm Motor power: 2.1 kW Motor power S1 100%: 1.5 kW Scope of delivery Spiral cutter head with 24 TCT (carbide) knives Spare TCT knives (5 pcs) Planer fence Hold-down clamp Mitre cutting guide Spindle moulder guide Protective guard with extraction nozzle Connecting hose with Y-branch Aluminium fence with stop Circular saw blade 250 x 3.2 x 30 mm / 24 teeth Ledpfxoytc N He Akqsrk Digital spindle speed indicator Push stick Tools

Condition: excellent (used), Year of construction: 1982, Panhans Mortising Machine Type: 116 – School Model – Two-hand operation Dowel hole drilling unit: spacing 16, 22, 25, 32 mm Drilling depth: 145 mm Mortise length: 240 mm Lrjdpfxjx Nrhrj Akqjk Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg - immediately available -

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Ljdpsx Tu N Hsfx Akqsrk Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: used, Demolition hammer, chisel hammer, Bosch hammer, mortise hammer, pointed chisel -Length: 410 mm -Width: 36 mm -Hexagon socket: 30 mm -Price: per piece -Number: 6 pieces Lsdofc R Dvjpfx Akqsrk -Dimensions: Ø 46 x 460 mm -Weight: 1.7 kg/piece

Condition: excellent (used), Cold room lock, cold room lock, mortise snail lock, cold room door lock -Manufacturer: STUV, cold storage lock unused Ovp Lsdpfoqqpkhox Akqjrk -Type: 3.16.416.1 KRT Lock V2A -Number: 5x door lock available -Price: per piece -Carton dimensions: 260/150/H40 mm -Weight: 1.1 kg/piece

Condition: used, Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 5x door lock available -Price per piece Lredpfxsqqpi Sj Akqek -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc.

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm Lredsxdttispfx Akqek - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Pneumatic tensioner Revolver stop Material support Lsdevk Dqvopfx Akqjrk Pneumatic foot pedal Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm Lsdpeu Nfizsfx Akqork mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Technical details: Lodpfx Asvt Nvpekqsrk pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm Lrsdju Nfibspfx Akqsk passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Lodpfxsu Nfi Uo Akqerk Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Ljdpfxevc Ax Ne Akqerk Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Year of construction: 2006, BACCI DOUBLE is a double head CNC machining center with 10 interpolated axes, numerically controlled, equipped with automatic hopper feeder. DOUBLE is designed for joinery operations as: tenoning, finger jointing, boring, mortising, milling, both at the ends of the elements and also between the ends. • Serial number AB 059, • 380 V, 50 Hz, 50 kW, • OSAI control, • Axes o X-axis 2400 mm, o Y-axis 650 mm, o Z-axis 1000 mm, o A-axis 360°, o B-axis 260°, • Machining dimensions: L min. 150 mm, L max. 2400 mm, W max. 250 mm, H max. 100 mm, • Input speed X, Y and Z axes 50 m/min, • Max. tool diameter 200 mm, • 4 tool positions per machining side, • 2 pneumatic clamps, • Spindle taper ER 32, • Spindle information right side: Speed 12000-24000 rpm, Power 7.4 kW, Lrodpfx Aox Dib Njkqsk • Spindle information left side Page: Speed 12000-24000 RPM, Power 7.4 kW,

Condition: used, Year of construction: 2014, Maximized productivity with two heads and two autoloaders. The exclusive design of hopperfeeders (Pade patent) allow the manual loading of the pieces without any barrier in front of the operator. The piece-holder magazine can be easily “parked” to the side to allow the manual loading of the pieces. Pneumatic clamps with locking from bottom to top that can be easily positioned on the TANDEM pods in order to quickly change the configuration from manual to automatic loading. Main features: - Working heads with the possibility of choosing between 1, 2 and 4 spindles - 2 working tables with pods, vacuum table or combined with customizable dimensions - Possibility to add single or multiple clamping systems and CNC lathe - Automatic workpiece loaders with magazine - E-LAB programming system, automatic trajectories manager Main functions: - Mortising Lodpfjxw Ty Njx Akqsrk - Drilling - Milling - Cutting - Tenoning

Condition: excellent (used), JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as: Tenoning / Finger Jointing / Drilling Lredpfxoirmyqe Akqjk Mortising / Milling / 4/5 axes profiling. Technical data: Full digital NC axes N. 5 Interpolated linear axes N. 3 Interpolated rotating axes N. 2 Longitudinal X axis 1,800 / 2,200 mm Transversal Y axis 1,300 mm Vertical Z axis 650 mm Length of clamp support table 1,400 / 1,800 mm A axis - Unlimited C axis +/- 180°

Condition: new, Year of construction: 2026, CORMAK PT260 230V Jointer-Thickness Planer – NEW VERSION Compact and precise woodworking machine for professional and hobby use The jointer-thickness planer is a versatile woodworking tool that allows for accurate flattening, thicknessing, and surface smoothing of wood. Ideal for furniture making, carpentry, and material preparation, it performs jointing, planing, edge processing, board production, and surface preparation for gluing. Featuring a durable cast iron table, three-blade cutterhead, powerful motor, and precise adjustment controls, it ensures high performance with ease of use. Applications The CORMAK PT260 230V jointer-thickness planer is ideal for: Woodworkers and craftsmen producing furniture elements, moldings, and wood structures Renovation and construction workshops processing raw and laminated timber Hobby workshops seeking a reliable, high-precision planer for home use Schools and training centers providing hands-on woodworking education on professional equipment Standard Equipment Ø75 mm cutterhead with 3 knives (250 × 30 × 3 mm) Jointer table: 1100 × 250 mm Thickness planer table: 600 × 248 mm Adjustable aluminum fence: 700 × 150 mm (tilting 90–45°) Anti-vibration rubber feet Dust port Ø100 mm Operating manual (Polish and English) CE Declaration of Conformity Optional Accessories Mortising and drilling attachment Chip and dust extraction unit Knife setting jig Roller support stands Key Features ✅ Durable cast-iron construction ✅ Compact design suitable for small workshops ✅ Smooth and accurate planing and jointing ✅ Quick adjustments for thickness and depth ✅ Efficient chip removal via 100 mm extraction port Technical Specifications Parameter Value Cutterhead diameter 75 mm Cutterhead speed 4000 rpm Number of knives 3 Knife dimensions 250 × 30 × 3 mm Jointer table size 1100 × 250 mm Thickness planer table size 600 × 248 mm Max. jointing width 250 mm Max. jointing depth 5 mm Max. thicknessing depth 2.5 mm Ledpfx Aow H R Aiskqsrk Max. thicknessing cutting depth 3 mm Max. workpiece height for thicknessing 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Fence tilt angle 90° – 45° Dust port diameter Ø100 mm Overall dimensions (L × W) 1100 × 250 mm Machine weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 230 V CE certification Yes

Condition: used, Year of construction: 1995, 1995 (CE) Comec MOV8UX+CAP(LV+LO) Mortising machine horizontal and vertical, for short parts, with double magazine for high productivity. Lrodjykni Hjpfx Akqjk 2 vertical groups and 2 horizontal groups for each feeder.

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Lodpfx Ajikiviokqerk Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Model: C3 Working Area: 3048mm*1524mm Laser Output Power: 40kW~1.5kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet C Series is capable of cutting edges of thin sheets and ensures no quivering marks. Ljdeg Rguyopfx Akqsrk Ytyixk 4.Stretching Aluminum Crossbeam Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% 5.Welded Bed with Tenon-and-mortise Joint Each frame of bed is welded after mortise-and-tenon joint to achieve better stability and firmness.

Condition: reconditioned (used), Year of construction: 1998, machine/vehicle number: M000039046, drilling depth: 180 mm, height adjustment type: mechanical, table width: 315 mm, table length: 565 mm, drill chuck size: 20 mm, overall weight: 260 kg, rotational speed (max.): 2,840 rpm, power: 1.5 kW (2.04 HP), working height: 850 mm, MAKA Slot Mortising Machine LB-1 Sturdy, heavy cast iron work tables and supports, combined with a large machine base, ensure flawless and smooth operation. Height and depth adjustments are monitored via graduated scales, while the ultra-smooth single-lever adjustment on ball guides allows for fatigue-free working. Technical data: Table size: 565 x 315 mm Work table height: 850 mm Longitudinal travel of drill head: 240 mm Max. drilling depth: 180 mm Vertical adjustment of drill head: 140/160 mm Two-jaw drill chuck: 0-20 mm Spindle speed: 2,850 rpm Motor power: 1.5 kW Extraction nozzle diameter: 90 mm Net weight: 60 kg Sound level according to DIN 45635/1600: 66.9 dB The machine is in excellent technical and visual condition and has been inspected in our workshop. It features a dowel hole drilling device for 16-22-25-32 mm and a precision mitre stop 45°- 0 -45°. Shipping available at additional cost. We only ship within the EU. No shipping outside the EU. Lodpfx Akeyc Rz Asqjrk