Used Plama Flame Lamination for sale (1,057)

Condition: new, Good day, we are selling a new flame sensor from LOOS here. Bjdpfxjw A I Afs Akxewl

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Bwjdpfx Akjvy Aipoxel Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 34205, total width: 4,100 mm, total length: 12,195 mm, cutting length (max.): 3,700 mm, We are selling our fully functional Hegla ProLam 37. Special features: Traveren – rotation device Support arms = 4 units for Low E glass, reinforced version Bjdsxqc U Aopfx Akxowl Technical specifications: Film thickness: 0.38 mm to 3.8 mm Maximum cutting height: 2 x 3 mm to 2 x 8 mm Maximum glass size: up to 3,750 mm Year of manufacture: ProLam 37 (2011) Brand: HEGLA The machine is still in operation and can be inspected on site at any time. Additionally, we have an EcoLam 60 available for sale, which we would include for an additional €10,000.

Condition: used, Year of construction: 2009, functionality: fully functional, Complete laminating machine with: automatic feeder, automatic pressure roller, pile sheet feeder. Bwsdpfexdm E Eox Akxel

Condition: excellent (used), Year of construction: 2011, Year: 2011 Maximum sheet size: 530 × 740 mm Laminating speed: up to 25 m/min Bsdpfx Akoxtxd Sexewl Automatic suction feeder Pneumatic roller pressure Automatic film cutting Compatible with gloss, matt, and soft touch films Short changeover time – ideal for short runs

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Ppsbqkzsrit H Roa I Ssu Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Bwjdpferit H Rex Akxsl Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Bjdpfx Ajwz Ev Tokxjwl Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Bwsdpfjw Hrrrex Akxjl corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, working width: 1,420 mm, Year: 1986 Width/mm: 1420 Thickness/µm: 14-400 Material: PO, PE, paper, HDPE, LDPE Detail: Plant consists of: 2x Fife edge trim control 2x Ahlbrand MFD 2000 pre-treatment units (year 2001) 1x Print Concept UV unit type PC 2w-1600-2x1 (year 2001) Coating unit with individually temperature-controlled rollers. Sleeve system D: 76mm. Several spare parts included. Bsdpfx Aoxcy Hyokxjwl

Condition: new, Year of construction: 2025, machine/vehicle number: NON, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,300 mm, Product name: MHL13000 Single-Sided Vertical Squaring Machine Maximum processing length: 13,000 mm Maximum processing width: 1,300 mm Maximum processing thickness: 230 mm Rated pressure of the hydraulic system: 16 MPa Main pressure cylinder (cylinder diameter x stroke): φ100 x 100; 34 units in total Side pressure cylinder (cylinder diameter x stroke): φ50 x 150; 34 units in total Side lift cylinder (cylinder diameter x stroke): φ63 x 400; 8 units in total Side pressure plate type: Single presser foot Hydraulic motor power: 5.5 kW Hydraulic system: Manual push-button control with pressure holding and automatic pressure compensation Dimensions: 13,300 x 1,300 x 2,300 mm Net weight: Approx. 15 t 1. Relief valve and electromagnetic directional valve: Zhenping Hydraulics 2. Oil pump and motor: Shanghai Volkswagen + Guangdong Juntai Bjdpfx Akjxgb Iaoxjwl 3. Hydraulic cylinders and high-pressure oil lines: Zhengtian, hand-made, with stable quality and high durability 4. Cylinder seals: Taiwan Dingji (high-performance seals)

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Bjdow Tyk Ispfx Akxjwl

Condition: used, Year of construction: 1993, functionality: fully functional, The machine is still running. Bwedex Igaaopfx Akxol We are selling it because a new machine will be taking his place.

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, pressing device, stop rulers Bjdpfx Akjvtm Ayjxewl

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Bwodpfxsw I Uwxo Akxel Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim

Condition: good (used), Year of construction: 1990, Edge or gluing press Bwodpfx Akjyxyh Ejxsl 5 vertical pistons 3 hold-down clamps External dimension: 3700 mm External height: 2480 mm Available from location 57319 Bad Berleburg

Condition: used, This listing is for the Basair Laminair Flow P Range Safety Cabinet Bwodpfx Ajyu Titekxsl The unit is in full working condition and is ready for immediate use Bassaire P-Range Laminar Flow Units are designed to provide an ultra-clean, particle-free environment to protect products, conforming to BSEN ISO 14644 (ISO Class 4 & 5) standards. Constructed from high-quality powder-coated white carbon steel or stainless steel, these units offer reliable vertical laminar airflow and are suitable for laboratories requiring strict contamination control

Year of construction: 2005, condition: ready for operation (used), A laminar flow unit Bleymehl for aseptic product protection is available. Total air volume flow: 1200m³/h, electrical power: 0.4kW, machine weight: approx. 90kg. Including one replacement curtain. The machine was manufactured in 2005, however only commissioned in 2018. Documentation available. An on-site inspection is possible. Bjdpfxjywy Rkj Akxswl

Condition: used, Year of construction: 1997, Manufacturer: Telstar Model: LPP1600 Year : 1997 (never used)   Bjdpfsx R Awgox Akxjwl Material :Polished stainless steel Power : 2500 w 1 vertical box 1 horizontal box Flux placed across the width of the other box Control panel on 1 side 3 sides with straps 3 neon lights laminar flow surface 200 x 150 cm Height: 200 cm Overall dimensions 250 x 150 x 250 cm   Feet or suspension mounting required

Condition: new, Year of construction: 2026, Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Bodpjdwqiusfx Akxswl Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays “fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our separation-technology like Fluid Bed Separators / Sievemachines / Sifters.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Delamination testing plant for laminated wood Bjdpfxex S E S Ae Akxjwl

Condition: ready for operation (used), Year of construction: 2008, total width: 1,350 mm, total height: 2,100 mm, overall weight: 2,200 kg, product length (max.): 7,000 mm, Laminating press manufactured in 2008. This Barberan PUR 46 L features a total power of 45.5 kW and operates at a voltage of 400 V. The machine dimensions are approximately 7000 × 1350 × 2100 mm, with a weight of around 2200 kg. If you are looking to get high-quality laminating capabilities, consider the Barberan PUR 46 L machine we have for sale. Contact us for further details regarding this machine. • Total power: 45.5 kW • Power supply voltage: 400 V • Operating voltage: 110 V • Current type: AC • Frequency: 50 Hz • Motor protection: IP55 • Air pressure: 6 bar • Air consumption (primer): 100 NL/min • Air consumption: 40 NL/min • Extraction diameter: Ø100 mm • Air flow rate: 700 m³/h Bwodpfx Aoyz Tgmokxel Additional equipment • Pre-melter: approx. 200 kg; dimensions approx. 1050 × 820 × 1830 mm • Flame treatment unit with ozone filter: approx. 500 kg

Condition: used, Year of construction: 2002, Technical details: thickness: 0,6 mm width: 1200 mm Length: 100 mm work speed: 1,5 - 3 m/min motor power: 45 kw compressed air: 7 bar Total weight, approx.: 4500 kg dimension machine xH: gesamt: 20 m / 2,6 m / 3 m m 2 pcs Sandwich Panel Production Plant The plant is especially suitable for producing light laminated panels. The plant consists of a feeding system (conveyor belt) for the material, cutting system, profile system and an electronically control system. The plant has a length of 20m, width of 2,6m, height of 3m. The total weight of the plant is approximately 4,5 tons. The power consumption including the thermal output is 36 KW. The recommended material of the internal layers are flame retardant Polystyrol or other light heat insulation materials. The sheet will be stable connected under pressure and heat with the Polystyrol through double sided application from portions of glue on the Polystyrol. The panels have good physical characteristics such as thermal insulation, sound insulation, wet consistency, bending strength, compressive strength and mechanical attributes. Any length of the laminated panels is possible and adjustable on customer demand. The color of the panel is variable and is depending from the color of the used sheets. Data Sheet Power Consumption of the plant (with heating system): 36KW Measurements: - Length = 20m - Width = 2,6m - Height = 3 m - Operating Temperatures: The optimal temperature for producing the panels is approximately 25 °C. - Material: galvanized metal sheet on rolls, sheet thickness 0,3 – 0,6mm and a width of 1200mm - Power Supply: 380 V 50Hz - Maximum engine power: 45 KW - Compressed Air: 7 bar Measurements of the laminated panels: Model 1 - Width 800 – 1200 mm - Thickness 20 - 30mm Model 2 - Width 1150 mm - Thickness 50 – 150mm( adjustable) Bwsdpfx Akeu Nxa Hjxel production plant consists of: - unwinding device - feed system - lamination - cutting device - glueing - fume extractor device - stacking device - electronic control system (Mitsubishi) *

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. • Condition: Excellent, low operating hours • Status: Connected to power; testable on-site Bwedpfx Akox E Edfexjl • Working area: Table 12,000 × 3,000 mm • Control system: Lincoln Electric Burny Phantom II • Plasma source: Kjellberg Finsterwalde HiFocus 161i • Maximum cutting thickness: • Oxy-fuel (steel S235): up to 300 mm • Plasma (steel S235): up to 50 mm • Plasma (stainless WNR 1.4301 / AISI 304 / KO-33): up to 40 mm Additional equipment • Complete extraction system • Messer OmniWin 2019 software with hardware key

Condition: used, mileage: 180,000 km, power: 75 kW (101.97 HP), first registration: 01/2016, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,200 mm, Equipment: ABS, central locking, soot filter, Chat via WhatsApp now: Quick & easy contact with our sales advisor. Attention!!! Sale primarily to business customers? Bedpfsyx Ry Ejx Akxswl Internal ID number: [3252] ----Optional extras available: * 12–64 months warranty (valid EU-wide) * New service * New TÜV & emissions inspection * Nationwide delivery * Financing possible even without down payment * Tow bar retrofit available on request * Spring offer: On request and for an additional charge of only €999, increase of towing capacity up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT deductible * Regularly serviced * German vehicle * 2nd owner * Euro 6 standard * Ready for immediate use Special equipment: Tow bar, reversing camera, long wheelbase, Composition Audio system (radio, SD card slot, MP3 playback), wooden floor in cargo area, rear wing doors with windows, interior release for tailgate/rear doors, 80-litre fuel tank, additional cargo compartment ventilation in D-pillar, high-profile bulkhead with fixed window, truck registration, Bluetooth mobile phone interface, smoker’s package, spare wheel with full-size tire, front passenger double bench seat Further equipment: Side sliding door cover strip, passenger airbag deactivatable, driver/passenger airbags, left aspherical mirror, electrically adjustable and heated exterior mirrors, right convex mirror, rubber flooring in cab, comfort roof lining in cab, EcoProfi, driver assistance system: brake assist (HBA), driver assistance system: multi-collision brake, tinted laminated windshield, lockable glove box, pollen filter, standard van body, standard roof variant, adjustable steering column, engine 2.0L – 75 kW TDI, 3400 mm wheelbase, low emissions according to Euro 5 standard, sliding door right side to load/passenger compartment, fabric upholstery, 6.5x16 steel wheels, start/stop system, front door storage compartments, half-high hardboard interior trim in loading/passenger compartment, heat-insulating glazing, permitted gross weight 2.80 t ----Interested in leasing or financing? We offer attractive offers—even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ----Note: All details on the internet are non-binding and serve only as general vehicle descriptions. Errors, mistakes, and prior sale excepted. The binding characteristics of the vehicle are determined solely by the purchase contract on site or through written confirmation. Vehicles with mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, 20DV DUO OFFICE CONTAINER FROM Berlin ✅ Container type: Duo office container / double container 20DV ✅ Condition: only used indoors, used, watertight, without equipment, windows on one side, laminate flooring will be installed on site ✅ Dimensions (LxWxH) per container: 6,058 x 2,438 x 2,800 mm – clear interior height 2,500 mm ✅ Availability: from Berlin ✅ Price is net per DUO unit ✅ Transport: Free and non-binding delivery quote (including unloading if requested) – just provide your postcode ✅ Variety: In addition to office containers, we also offer shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, …) for storage, construction projects, logistics solutions, or sea transport Bsdpfxey Iy S As Akxjwl Contact us now – we’re happy to advise you! NAUTEXA GmbH – Your container partner