Used Schiele Srs 25 for sale (14,943)

Condition: used, machine/vehicle number: 10976, 3-blade rotor 2 rows of stator blades Crodpfx Anoyr Tizjwjb Rotor diameter: 350 mm Rotor width: 250 mm Inlet cross-section for profiles: approx. 250 x 100 mm Machine in noise-protection enclosure

Condition: used, mileage: 16,757 km, power: 168 kW (228.42 HP), first registration: 02/1990, overall weight: 13,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, Iveco 120-23 AW V8 diesel as a 16/25 TLF with 0l water tank +++ Originally only 16,754 km V8 naturally aspirated diesel with 12.7L displacement 4x4 all-wheel drive with low-range gear 6-speed manual transmission 2x differential locks (center and rear) 9 seats Credpfxjx A N Tpj Anwsb 10Rx22.5 tires Magirus body 16/8 Magirus rear pump Extremely well maintained and ready for immediate use +++ Errors, changes, and prior sale reserved

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm Cjdpsyz Dgwofx Anwerb distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: used, Year of construction: 2018, operating hours: 1,496 h, machine/vehicle number: Z4525XCM-464, fuel type: diesel, Weights Crodpfx Ajyzl E Ujnwsb Empty weight: 6.882 kg Functional Mast: articulated arm Lifting capacity: 454 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Max. horizontal reach: 755 m Transport dimensions (LxWxH): 6.65x2.29x2.25 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 11,500 mm, total width: 4,000 mm, total height: 3,800 mm, working height: 52 mm, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1D/25, year 2005, working direction left/right, consisting of following: - APKV-4/25, automatic 4-lane kork application machine, year 2005 - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device , year 2005 - VFL-1D/25, sealing robot, including options for triple units (2 sealing cycles), , with Beckhoff PC and Lenze servo drives - DOS-1PUD + SID, material dosing for PU (base 200 liter, catalyst 20 liter) and SI (base 200 liter, catalyst 20 liters), year 2005 Codpey Ivcwsfx Anwerb The machine will be sold as described above, EXW our client's factory in Germany. No further guarantee or warranty given. Machine will be available middle of May 2026

Condition: ready for operation (used), Year of manufacture: 1988 / Overhauled in 2019 by HYDAC Accessoirs with a completely new control system Load capacity: 2,000 kg Table diameter: 1,500 mm Band width: max. 100 mm Band thickness: 0.3 – 1.0 mm Maximum coil height (incl. pallet): approx. 850 mm Number of pinch rollers: one pair Weight: approx. 2,200 kg Dimensions: approx. 2,600 x 2,100 x 1,700 mm Execution/features: • Sturdy welded frame construction • Coil hold-down plate • Large band deflection roller • Deflection roller and pinch rollers hydraulically height adjustable • Motor-driven pinch rollers with lateral band guide and roller cage • Deadman switch for safe band threading during setup operation at safe speed Crodpfx Anoy Hlgpjwsb • Direction of operation (forward/reverse) selectable via hand switch • Continuously adjustable pulling force via potentiometer • Loop control system • Free-standing control cabinets with operator panels

Condition: used, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 25 m³, Equipment: ABS, Equipment: * Schmitz Cargobull thermal tipping body * Cramaro electric tarpaulin with remote control * WABCO Smart Board * Lift axle * Air suspension * Disc brakes * Schmitz Cargobull axles * Paver brake * Automatic lowering during tipping operation * Tyres: 385/65R22.5 * Folding underrun guard suitable for pavers, with lift assist * Off-road start assist (only permitted off public roads) * Small plastic toolbox * 1 access ladder on the front wall Crjdpfxjyxbbgs Anwob * Steel round body * Full thermal insulation All information without guarantee. Subject to errors and prior sale.

Condition: used, machine/vehicle number: 007468, X axis working area: 3200 mm Y axis working area: 1300 mm Main Electrospindle power: 11 KW Number of controlled axes: 3 axes Codpfx Aswuz Tujnwjrb Total number of drilling spindles: 36 Total number of tool changer positions: 10

Condition: used, functionality: fully functional, machine/vehicle number: 2481588, Year of construction: 2017, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 140 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, power: 37.4 kW (50.85 HP), fork carriage width: 1,038 mm, fork length: 11,150 mm, fork width: 122 mm, fork thickness: 40 mm, turning radius (inner): 145 mm, turning radius (outer): 2,265 mm, front tire size: 7.00-12 12, rear tire size: 6.00-9 10, overall weight: 4,000 kg, total height: 2,115 mm, total length: 3,685 mm, total width: 1,155 mm, color: red, fuel: diesel, Equipment: cabin, pallet forks, Technical Specifications Year of manufacture: 2017 Engine: Diesel, 37.4 kW Drive: 2WD Lifting height: 4.70 m Load center: 500 mm Free lift: 140 mm Overall dimensions (L x W x H): 3.68 m x 1.16 m x 2.12 m Fork dimensions (L x W x H): 1.15 m x 0.12 m x 0.040 m Travel speed loaded/unloaded: 18.0 km/h / 18.5 km/h Max. load capacity: 2,500 kg Max. gradeability: 20% Turning radius: 2.27 m Weight: 4,000 kg Tyres: super elastic Fully functional, normal signs of use, Triplex mast TLL47 with free lift, 2WD drive, full cabin. Cjdpfeyqz Ehsx Anwsrb

Condition: used, functionality: fully functional, machine/vehicle number: 2482518, Year of construction: 2019, load capacity: 2,500 kg, lifting height: 6,500 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, power: 38 kW (51.67 HP), fork carriage width: 1,020 mm, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 40 mm, turning radius (inner): 2,280 mm, front tire size: 7.00-12, rear tire size: 6.00-9, overall weight: 3,600 kg, total height: 2,110 mm, total length: 3,640 mm, total width: 1,150 mm, color: red, Equipment: UVV, cabin, pallet forks, Technical data Year of manufacture: 2019 Cedpfxjyqzbij Anwerb Drive: Diesel Load capacity: 2,500 kg Load center: 500 mm Own weight: 3,600 kg Lifting height: 6.50 m Overall length: 3.64 m Overall width: 1.15 m Overall height: 2.11 m Fork dimensions (L x W x H): 1.00 m x 0.10 m x 0.04 m Front tire size: 7.00-12 Rear tire size: 6.00-9 Travel speed with/without load: 18.5 km/h / 19 km/h Max. gradeability: 29% Engine output: 38 kW Fully functional General signs of use Optional delivery possible Rental also available upon request

Condition: used, Year of construction: 2001, Amada HFE 80-25 SL Hydraulic Press Brake. S/No. VO11137 (2001), Remanufactured JTES 2018 Csdjy D Rhyspfx Anwjrb Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Technical details: grinding diameter: 250 mm grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm folded disc width: 200 mm Csdpfx Ajyzptionwjrb spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t

Condition: like new (used), Year of construction: 2022, functionality: fully functional, SCM Accord FMX 25 - including swing crane lift with vacuum unit. Working feld: X 4 970 - Y 2 120 - Z 250 mm. 5 axis machine 12 KW router engine For more technical specification please read included document " SCM Accord FMX 25 - Final order" Very clean machine , first time installed in September 2022, comes from a trening center also never used in full production. Crsdpfx Asy D Evlenwob Located in south part of Norway.

Condition: new, functionality: fully functional, machine/vehicle number: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, noise level: 66 dB, battery capacity: 76 Ah, Technical specifications: Condition - NEW! Catalog Number: 1.515-400.0 Drive type: Battery Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Battery type: GEL - maintenance-free Charger power supply (V / Hz): 230 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L × W × H) (mm): 1135 × 520 × 1025 Cjdpfoxnphqex Anwerb Scope of delivery and equipment: - SONNENSCHEIN 12V 76Ah GEL BATTERIES (2x). - NEOS 24V 10A EXTERNAL CHARGER - V-shaped 750mm suction bar with oil-resistant polyurethane rubbers - 430mm red disc brush - medium hard Equipment: 2-tank system Batteries and charger included: - Sonnenschein 76Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the dead man's switch. The machine is easy to operate thanks to a small number of yellow-coded controls. - Highly maneuverable and easy to use. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine. Key features: - Options for attaching hooks, containers, mops, etc. - Additional cleaning tools can be carried. - Very good value for money.

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Csdpjyz Dr Tsfx Anwerb Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: ready for operation (used), Year of construction: 2003, operating hours: 54,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 80, number of axes: 4, This 4-axis HELLER MCi 25 was manufactured in 2003. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis capable of 360° indexing. The machine is equipped with a tool magazine holding 80 slots and supports a total of 6 pallets. If you are looking to get high-quality machining capabilities, consider the HELLER MCi 25 horizontal machining centre we have for sale. Contact us for further details. • B-axis: 360° (indexing/rundtisch) • Tool magazine: 80 slots • Pallet quantity: 6 total (2 in use, 4 standby) • Operating hours: approx. 2,700–3,000 hours per year (counter reported defective) • Total estimated hours: approx. 54,000–60,000 (based on 2-shift operation since 2006) • Coolant volume: 1,500 liters • Voltage: 400 V Crodjyzzr Djpfx Anwob • Frequency: 50 Hz • Full load current: 100 A • Connection load: 65 kVA • Status: Fully functional, under power, currently in production Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Cedpfx Ajv Htnionworb Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: used, We are offering used shelving units for sale. TECHNICAL DATA Manufacturer: FX Rauscher Model: P30 Condition: used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 Boltless assembly Usage: single-sided Material: galvanized steel PRICE €1,216.25 net (5 starter bays + 20 add-on bays) €1,447.34 gross incl. VAT Crsdpfxoy Hqt Ij Anweb Tiered pricing Starter bays: 1 - 5 units: €70.00 net 6 - 20 units: €66.63 net 21 - 50 units: €63.25 net from 51 units: €59.88 net Add-on bays: 1 - 5 units: €50.00 net 6 - 20 units: €47.50 net 21 - 50 units: €45.00 net from 51 units: €42.50 net Large quantities available directly from stock. YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an additional charge, depending on the destination and the size of the shipment. Please contact us for a customized quote. PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms will be agreed upon in case of an order. The price is the unit/net price unless otherwise stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanines, textile storage systems, as well as machinery for commerce, industry, and trades. We continuously offer attractive second-hand equipment from various manufacturers and brands at competitive conditions. If you have any questions, please feel free to contact us. ‘Four wins’—the four success factors from DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Year of construction: 2022, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: MIC2500000791, Professional ball refiner, ideal for the production of spreadable creams, ice cream paste, praline fillings, and chocolate. 🟢 Condition: Like new – used only a few times 📆 Year of manufacture: 2022 🔌 Voltage: 380 V / 50–60 Hz 🔢 Serial number: MIC2500000791 🏷️ Made in: Italy Crsdoyt Rt Tjpfx Anwsb 📍 Location: Germany 👀 Inspection: Possible on-site or via video call This is a high-quality machine – ideal for artisan chocolatiers and small production facilities seeking reliable and professional equipment. 💬 If interested or for further details/photos, please feel free to contact us!

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500 Crjdpfxswp Ilys Anwjb

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Cjdpfx Aomqk Tpjnwjrb Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm Csdpfsya Eldsx Anwerb • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, fork carriage width: 525 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Mast type: None Technical condition: New Cjdpfx Ansyfyymewjrb Steering wheel: Rubber; Load rollers: Polyurethane; Tandem; Colour: Green; Version: EVO, manual travel and lift, entry/exit rollers, 3D steel tiller, proportional lowering valve

Condition: new, sheet length: 2600sheet thickness: 6upper roll diameter: 190Side Roll: 170prebending: 4motor: 3messurements (LxWxH): 4450 x 1080 x 1160weight approx.: 3350 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine Credpfx Ajd Ab Tnonwsb - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: used, total length: 3,000 mm, total width: 2,400 mm, total height: 2,300 mm, Weight: 7.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 2500 - Transport dimensions: 3000mm x 2400mm x 2300mm (l x w x h) - Transport weight [kg]: 7000kg Crodpjwmq Ilofx Anweb - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum