Used Shimadzu Sil-Ht for sale (2,720)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Nwsdpfok S Dt Tox Akcjf Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm Nedpfx Akofxyh Rjcswf speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling Nedpfx Ajydv I Djkcowf • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 50 mm gear width: 20 mm Nedpfoxxl Sgsx Akcewf max. module: 4 mm min. module: 0,1 mm total power requirement: 12,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. Nwsdpovptz Ijfx Akcef – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Year of construction: 2003, condition: used, Technical details: rated capacity: 175 kVA flow rate: 100 m³/h revolution per minute: 1500 U/min connection voltage: 400 V dimensions L x W x H: Container: 3,0 x 2,6 x 2,6 m Gas purification plant incl. container Application: For purification of sewage gases from organic silicon compounds and hydrogen sulfide. Gas pressure boosting plant make Muche GmbH Scope of delivery ivated carbon filter Cooling Danvoss; air consumption 2.800 m³/h; refrigerant R 134a Nwjdpfx Aju Nvb Ijkcef Heat exchanger Renzmann&Grünwald Condenser ID Compressor MTZ22-4VI control cabinet incl. documentation, for sale as is. *

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Nodpfx Akorr Ui Rocswf Height 2000 mm weight 1500 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, reverse speed: 10 mm/s, ram plate length: 1,000 mm, travel distance X-axis: 1,200 mm, type of input current: AC, pressing force: 40 t, power: 9 kW (12.24 HP), Equipment: safety light barrier, Spotting Press – Manufacturer Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a tool opener/closer and features an extendable table, a rotatable ram, and a large installation height of 1,800 mm. It is particularly suitable for spotting, adjustment, and tryout operations with heated dies. ===== Technical Data + Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Die Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Overall height: approx. 3,800 mm ==== Working Area - Maximum open height: 1,800 mm Nedpfotwmp Sex Akcjwf - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: according to customer specification ==== Table System - Table extension: 1,200 mm - Table travel speed: 30 mm/s ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning notifications via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components by SICK ==== Equipment - Insulation of the clamping plates (resin insulating plate + ventilation plate) - Custom color design as requested by customer - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, die adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes, heated dies Spotting press, tool tryout press, sliding table press, die opener, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a custom quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all points of the Brazilian national safety regulation NR 12, which is based on these standards. Our core competencies include custom machine building and automation of presses. We supply tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics in our presses primarily feature components from leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) Njdpfeph Uk Nox Akcswf table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 20 t, Double column press 20 T capacity, a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 20 kN Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Size 1100x850 mm Speeds Fast closing with 9 mm sec. Nedpfx Akehmbhqecowf Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press with 10 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 0 - 10 mm/sec. downwards, b) Opening speed up to 25 mm/sec c) Starting press speed 10 mm/sec, adjustable from 0 to 10 mm/sec. d) Table size 600x300 mm e) Ram size 300x300 mm, with T-slots and central cylinder clamping f) Overall size approx. 1100x600x1850 mm g) Oil temperature display on oil tank h) Pressure setting from 0.5 T to 10 T (adjustable via rotary control) i) Cable remote control for downward/upward movement j) Machine body powder coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Assembly, commissioning, instruction at extra charge Type of construction Press design Single-column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Max. pressing force (at 250 bar) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool Steel on steel Max. 2 sec. Dimensions Max. Opening width 800 mm Stroke and min. opening 500/300 mm Table height above floor 850 mm Height above floor (headroom) approx. 2850 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 70% occupancy < = 0.1 mm/m Weight Total weight of the press without operating materials approx. 1.6 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke #ERROR! bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Nsdehma Smopfx Akcowf Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-Column Press – Manufacturer Hidrobrasil – 10 t Assembly Press – Table 600 × 300 mm For sale is a hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of up to 10 t. The machine is designed for continuous shift operation and stands out due to its robust construction, reliable hydraulic components, and flexible range of applications in assembly and pressing processes. ===== Technical Specifications & Information: Hydraulic Single-Column Press – 10 t ==== General Specifications - Manufacturer: Hidrobrasil - Model: Single-Column Press / Assembly Press - Design: C-frame press / Single-column press - Press force: max. 10 t (100 kN) - Machine weight: approx. 1.2 t - Dimensions (L × W × H): approx. 1,100 × 600 × 1,850 mm - Table height: 850 mm - Operation sides: 1 ==== Working Area - Max. opening width: 400 mm - Stroke: 350 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder clamping ==== Speeds - Approach speed: 0 – 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pressure accuracy: ± 5 bar Njdpfehaqygox Akcewf - Pump: Gear pump, approx. 6 l/min - Oil volume: approx. 80 l (HLP 46) ==== Drive & Electrical System - Motor power: 2.2 kW - Total connected load: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Features & Operation - Pressure adjustment via rotary knob (0.5 – 10 t) - Remote cable control for up/down movement - Oil temperature display - Control cabinet supply: 3,000 mm cable with 16 A plug - Machine body powder-coated / double painted ==== Control & Components - Control system: Siemens - Hydraulic components: Bosch Rexroth ==== Design & Safety - Robust machine body according to DIN 8651 - Cylinder induction-hardened and chrome-plated - CE certificate available - Documentation in German - Low maintenance and reliable - Complies with current EU directives ===== Suitable for: Assembly work, pressing work, small batch production, workshop applications, light forming technology Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die setting press, tryout press, tool try out press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which is based on and builds upon these. Our key strength lies in custom machinery construction and press automation. We offer custom-tailored hydraulic presses at surprisingly competitive prices. For the hydraulic systems of our presses, we predominantly use components from leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 120 t, Hidrobrasil Glulam Press – Glulam Beam Press – 12,000 mm – 12 × 10 t Cylinders For sale is a hydraulic glulam press manufactured by Hidrobrasil, designed for the production of glulam beams up to 12,000 mm in length. This machine is engineered for industrial manufacturing of laminated timber beams and offers high flexibility in the pressing process thanks to cylinders that can be controlled individually or in groups. The system also enables production of curved components by using appropriate molding forms. ==== Technical Data & Information: Hydraulic Glulam Beam Press ==== General Information - Manufacturer: Hidrobrasil - Model: Glulam Press - Machine type: Glulam Beam Press - Design: Hydraulic beam press - Application: Glulam/laminated timber production ==== Working Range - Max. workpiece length: 12,000 mm - Max. width: 150 mm - Max. height: 600 mm (depending on wood type and construction) Nodpfeg Tzbajx Akcjwf ==== Pressing System - Number of cylinders: 12 units - Pressing force per cylinder: 10 t - Individual or group control possible ==== Operating Speeds - Downward speed: 10 mm/sec - Upward speed: 25 mm/sec ==== Hydraulics - Components: Bosch Rexroth (except cylinders) - Hydraulic unit: external, located behind the press - Oil tank: 500 l - Motor power: 15 kW ==== Control System - Control panel for individual or group cylinder operation - Adjustable pressure holding time ==== Special Features - Production of both straight and curved glulam beams possible - High flexibility through modular cylinder control ==== Wood lamination, glulam manufacturing, timber construction, laminating, industrial wood processing Hydraulic press, hydraulic press, gluing press, glulam beam press, lamination press, laminated timber line, wood press, industrial press Are you looking for a hydraulic press tailored to your specific requirements? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directive, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our key strength is special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. Hydraulic systems mainly utilize components from leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Nwodpsg Iihwofx Akcsf Pressing speed At F max.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK Nsdpfx Asgrkigjkcowf (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0362, pressing force: 250 t, pressure:250 t passage width:1800 mm stroke:600 mm total power requirement:22 kW weight of the machine ca.:24 t Nwsdefxyinopfx Akcef dimensions:ca. 3390 x 3400 x 3800 mm column diameter:160 mm return capacity:25 t max. working heidht:800 mm Table dimensions:1800 x 1600 mm :2350 x 1600 mm table height over floor:900 mm hydraulic table shift:25 mm/sec table load:5 t pre-running speed:10 mm/sec pressure speed:10 Return Speed:25 mm/sec speed rapid traverse:10 mm/sec :600 l Oil cooling (electric):1,5 kW (max) :46er / 10 my Monitor SIEMENS:10 Zoll

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t Nedpfxsfxygpo Akcowf dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 20 t, Hydraulic 20 T single-column production press for the manufacture of lightweight concrete parts. Here are the technical data of the offered machine: Nwodsia Nc Tepfx Akcjf If the press does not exactly meet your requirements, please click here to request an individual offer exactly according to your wishes: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly favourable prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Maximum open height 300 mm d) Pressing speed 4 - 10 mm/sec. ( adjustable via rotary control ) e) Die size 600x800 mm f) Ram size 950x600 mm g) Manual lubrication (via grease nipple) h) Pressure setting from 5 T to 20 ( adjustable via rotary control ) i) Travel 300 mm j) Installation, commissioning, instruction at extra charge Technical Data Press type C Press, hydraulic Thermal neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel on steel Max. 3 sec. Dimensions Max. Opening width 350/50 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2,500 mm Parallel deviation at 20°C +/- 0.4 mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.6 mm/m Weight Total weight of the press without operating materials approx. 2.2 to Speeds Fast closing with 10 mm sec. Press speed 10-5 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders 1 pc. Plus 1 ejector, 110 mm stroke, max. operating pressure 255 bar Pressing pressure build-up time 03. apr sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/ASC approx. 6 L/min Oil volume approx. HLP 46 D 100 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 4 kW (C-press, hydraulic press, hydraulic press, concrete press) Are you looking for a customised machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply in all points with the national Brazilian safety directive NR 12, which is based on these. Our great strength is the construction of special machines and press automation. We sell customised hydraulic presses, press brakes and impact shears at surprisingly favourable prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: new, Year of construction: 2022, pressing force: 100 t, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Nwodpfehmi T Uex Akcof Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Nedpfx Akoxrby Hocswf Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: new, pressing force: 100 t, pressure:100 t passage width:700 mm stroke:450 mm weight of the machine ca.:6 t dimensions:ca. 3000 x 1210 x 3100 mm return capacity:10 t :22 kW Max Working height:850 mm :1 - 100 mm speed of return flow:1 - 100 mm/sec :1 - 10 mm/sec. pestle plate:1090 x 600 mm table plate:1090 x 600 mm positioning accuracy:0,1 mm table height over floor:800 mm :300 l Oil cooling (electric):1,5 kW (max) ejector:d=100 mm ejector stroke:210 mm pressure of ejector:100 t no. of ejector pins:1 Stück Monitor WEG:15 Zoll :2.000,-- ? :2.400,-- ? Njdofxyhqopfx Akcjwf :3.000,-- ? :2.400,-- ? :5.800,-- ?

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, pressing force: 20 t, total length: 2,400 mm, total width: 1,500 mm, total height: 2,400 mm, overall weight: 2,000 kg, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, control cabinet length: 60 mm, control cabinet width: 80 mm, height adjustment type: hydraulic, Equipment: documentation/manual, Hidrobrasil Tablet Press – 20 t – C-Frame – Manual Loading Press For sale is a hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of 20 t, specifically designed for applications in the pharmaceutical and chemical industries. The machine is ideally suited for the production of tablets, as well as for precise pressing and forming tasks in smaller batch production and laboratory applications. ==== Technical Data & Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Machine type: Tablet Press - Design: C-Frame / Single-Column Press - Year of manufacture: 2023 - Location: Gelsenkirchen, Germany - Pressing force: max. 20 t - Machine weight: approx. 2 t - Total height: approx. 2,400 mm ==== Working Area - Max. opening width: 500 mm - Stroke / min. opening: 400 / 100 mm - Table height above floor: 800 mm ==== Speeds - Rapid closing: 120 mm/sec - Pressing speed: 5–10 mm/sec ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Pressure accuracy: ±5 bar - Main pump: Gear pump, approx. 10 l/min - Oil volume: approx. 150 l (HLP 46) - Main motor: 22 kW - Total connected load: approx. 6 kW ==== Precision & Stability - Parallelism deviation: ±0.1 mm at 20 °C Nwsdpfx Akotv Ewdjcjf - Deflection: max. 0.3 mm/m ==== Control & Safety - Control voltage: 24 V DC - Light barriers: SICK / Pilz / Schmersal - Two-hand control, optionally foot control - Safety design complies with EU standards and UVV ==== Equipment - Table top designed as a tray with 50 mm edge and drain - Position adjustment via sensors - Pressure adjustment: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 ==== Production & Features - Multi-tool: 8 pressing cylinders - Output: approx. 8–12 parts per minute - Hydraulic unit fully removable for maintenance ===== Tablet production, pharmaceutical industry, chemical applications, laboratory presses, small batch manufacturing Hydraulic press, tablet press, single-column press, C-frame press, pharma press, laboratory press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Condition: used, Year of construction: 2019, pressing force: 250 t, pressure:250 t passage width:2500 mm stroke:500 mm total power requirement:60 kW weight of the machine ca.:39 t dimensions:2720 x 3750 x 4350 mm return capacity:25 t max. working heidht:800 mm Table dimensions:3090 x 1500 mm :3090 x 1500 mm table height over floor:1000 mm pre-running speed:400 mm/sec pressure speed:bei 125 t, 50 mm/sec Return Speed:400 mm/sec speed rapid traverse:400 mm/sec :1500 l Oil cooling (electric):3 kW (max) Vibration damper plates:je 450x450x85 mm pressure:250 t bei 220 bar t/bar pump capacity:176 Lt./min :46er / 10 my Hydraulics from Bosch Rexroth or other German manufacturers :Parker, Hydac Nedpfod Nq Idsx Akcewf :inklusive Light Barriers from Schmersal/Pilz:Pilz Monitor:Omron 12 Zoll

Condition: new, Year of construction: 2025, pressing force: 110 t, Hidrobrasil Spotting Press – 110 t – Tryout Press – Table 1,200 × 1,000 mm Available for sale is a hydraulic spotting press from the manufacturer Hidrobrasil, offering 110 t pressing force and a versatile table and ram system. The machine features a swiveling and tilting table, a rotatable ram, as well as a maximum opening of 1,300 mm, making it especially suitable for spotting, die tuning, and tryout operations in tool and mold making. Nodpfjv N D Ncex Akcjwf ==== Technical Data & Information: Spotting Press Hidrobrasil – Tryout Press – 110 t ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Type: Tryout Press / Spotting Press - Pressing Force: 110 t - Machine Weight: approx. 11.5 t - Dimensions (W × H): approx. 2,900 × 3,000 mm ==== Working Area - Maximum Open Height: 1,300 mm - Stroke: 800 mm ==== Table System - Table Size: 1,200 × 1,000 mm - Table extendable: up to 1,000 mm - Table rotatable: 180° - Table tiltable: up to 75° - Table travel speed: 30 mm/sec ==== Tool Mounting - Ram rotatable: up to 180° ==== Speeds - Downstroke speed: 1–10 mm/sec - Upstroke speed: 25 mm/sec ==== Hydraulics - Hydraulic system: Bosch Rexroth ==== Control and Electrics - Control: Siemens S7-1200 - Control cabinet technology: Siemens ==== Features - Manufactured under German supervision in Brazil - CE-compliant design ===== Spotting operations, tool tuning, die tryout, mold making, toolmaking, tryout operations, adjustment processes, flexible tool machining Hydraulic press, spotting press, die trial press, tryout press, production press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), conforming to EC standards and EU safety regulations. Furthermore, our presses surpass Canadian and European safety standards, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these requirements. Our core competence is in custom machine construction and press automation. We supply custom-made hydraulic presses at surprisingly competitive prices. For the hydraulic systems of our presses, we predominantly use components from leading European manufacturers.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t Nwjdpfx Ajtwv S Nokcof ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.