Used Single-Sheet Envelope Feeder for sale (17,354)

Condition: used, faceplate diameter 1400 mm Bdjdpoyuqdzofx Akxob swing diameter 1600 mm turning height 1200 mm turning speed range - milling 1 - 240 U/min Control Siemens SIN 820T ram head - cross travel 1000 mm total power requirement 55 kW A.T.C. 12 positions Tooling

Condition: used, functionality: fully functional, Work surface: 1,400 x 5,000 mm Bdodpotpg A Eofx Akxjb Stainless steel lining Drive with 2 x 2.2 kW unbalance motors

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Bsdpjy Dvlqjfx Akxsdb Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Bdodpfjyng Agox Akxob Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2003, operating hours: 5,318 h, 2003 | Terex Pegson 428 Track Feeder Impact | Used Crusher | 5318 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 75000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 81 inspection points 58 approved ✅ 23 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine has not been running continuously for a few years, but it does undertake a few small campaigns each year. It has recently worked and is ready to work. It has been parked in the sun (no shelter) hence the oxidation and cracked hoses. We were not able to see the main and magnetic conveyors in operation during the inspection. Please look at all the photos and videos for more details. Bdedpfxsyz Ubfj Akxsb 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40524 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), functionality: fully functional, Year of construction: 2000, working width: 3,200 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, back gauge adjustment: CNC-controlled, power: 7.5 kW (10.20 HP), Equipment: documentation/manual, Very well-maintained and technically upgraded RAS 74.30 folding machine with a working length of 3200 mm. The machine has been specifically modernized and is immediately ready for production – ideal for metal construction and sheet metal processing. Technical data: Working length: 3200 mm Max. sheet thickness: 4.0 mm (steel) Year of manufacture: 2000 Power: 7.5 kW Weight: approx. 5800 kg Equipment / Highlights: Motorized backgauge with swing fingers Travel path up to 2500 mm with stop extension Refurbished power supply Upgraded control system New SD card slot New flat screen (not yet visible in the photos) Reliable, robust industrial machine The machine runs smoothly and can be inspected under power. Bdedpfx Akey A Ewmexjb

Condition: new, Year of construction: 2026, operating hours: 1 h, working height: 700 mm, total length: 9,000 mm, total width: 3,600 mm, BOOSTON MACHINERY – European Manufacturer of Machines Our company specializes in manufacturing machinery for the prefabrication of timber-framed houses. With years of experience in the design and prefabrication of residential buildings, we create production lines for small, medium, and large enterprises producing timber frame walls, floor systems, and roof panels. This listing offers the ASSEMBLY & ROTATION TABLE ER-01H with a length of 9 m (other lengths available: 6.0 m; 7.5 m; 9.0 m; 10.5 m; 12 m. The modular design allows for table extension, e.g., from 6 m to 9 m, in increments of 1.5 m). The ER-01H tables can be expanded with a second wing (control and hydraulic pump are prewired and ready to connect the second wing). TECHNICAL DATA: -> Working length: 9,000 mm -> Working height: 700 mm -> Working width: 3,600 mm -> Prefabricated wall height range with SD-01 clamping cylinders: 500–3,400 mm -> Adjustable vertical pins: 120–200 mm (40 mm step) -> Pre-drilled for SD-01 clamping cylinders -> Horizontal transport for ER-01H-R variant (optional): 3 rows of pneumatically lifted rollers (8 bar) -> Table drive: hydraulic -> Control: control panel -> Maximum load capacity: 2,500 kg (for 9 m table) ADDITIONAL OPTIONS: 1. SD-01 clamping cylinders 2. Set of pneumatically lifted rollers (3 roller lines) 3. Set of roller pins for vertical transport The single-wing ER-01H rotary table is a versatile workstation for the prefabrication of timber frame walls. ER-01H tables can function as standalone workstations or be integrated as a base/central/final station in a production line. Bdjdey Iqk Nspfx Akxeb ER-01H tables can be equipped with pneumatically lifted horizontal roller sets and vertical roller pins. The modular table design allows future length adjustments by replacing a few structural frame elements. Table rotation is possible from 0° to 81°, and can be unlocked up to 91° for production lines. We also offer dedicated transport trolleys for the ER-01H tables, enabling the transport of finished prefabricated elements from the table.

Condition: used, total length: 2,500 mm, total width: 1,700 mm, total height: 1,500 mm, Weight: 2.050 kg - Documentation available: Yes Bdodpfsyzp A Rex Akxeb - CE certificate present: No - Serial number: 14/9 - Drive system: Conventional - Drive type: Mechanical - Configuration: Swing-beam - Power [kW]: 5.5 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 2040 - Cutting speed [mm/min]: 50 - Throat depth [mm]: 100 - Backgauge depth [mm]: 550 - Angle adjustment: Manual - Transport dimensions: 2500mm x 1700mm x 1500mm (l x w x h) - Transport weight [kg]: 2050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads Bedjy H Hzbspfx Akxodb - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: excellent (used), functionality: fully functional, Side Feeder for Extrusion Lines Used side feeder in good condition, suitable for the lateral feeding of powder, regranulate, fibers, or other additives into extrusion processes. Robust design, ideal for expanding existing extruder or compounding lines. Inspection possible by appointment. Bedpfx Akjyzzrwsxjdb

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650 Bodsx A Thqspfx Akxodb

Condition: used, machine/vehicle number: 008325, Position 1: Single Edgebanders HOMAG-EDGETEQ S-390 - LOOPTEQ O-300 Bdedpfx Akex Hpkloxjb Position 2: Panel Return Systems HOMAG-EDGETEQ S-390 - LOOPTEQ O-300

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05 Bdodpsx A Hi Isfx Akxeb

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Bsdpfx Aex Swf Uekxjdb

Condition: used, machine/vehicle number: 008148, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Bodpfsxtugcex Akxedb Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 210 AMBITION 2274

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B AIRTEC Bdedpfx Aowukywjkxsb Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B AIRTEC

Condition: used, machine/vehicle number: 008250, Position 1: Single Edgebanders BIESSE-STREAM B1 9.0 Bjdpfjx Dipmox Akxedb Position 2: Roller Conveyors BIESSE-STREAM B1 9.0 Position 3: Single Edgebanders BIESSE-STREAM B1 9.0

Year of construction: 2005, condition: used, Stream Cover Feeder Kolbus SAL 411.A year 2005 Configuration: Bdedpfxoyzduhe Akxob • miss- and double sheet control Technical specifications: compatible with: KOLBUS KM 473 perfect binder

Condition: refurbished (used), Year of construction: 2010, XXL-Center RAS 75.06 - General technical data in mm: Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Bdedpfsx Hf Tvox Akxsb Gripper claws travel range: 10 – 750 mm Clearance in front of the jaws up to: 300 ° Extendable loading tables: yes Gripper claws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor-driven; 400V, 50/60 Hz, 3-phase Year of manufacture: 2010 Condition: Will be completely overhauled - Images are examples -

Condition: used, Feeder/conveyor belt 6.6m long x 225mm wide Bdodpfxoxrtkde Akxeb

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested Bedpfx Asvwgizskxsdb with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm Bedpfevb Dcasx Akxsdb ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Condition: used, Technical details: faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1170 mm z-axis: 1000 mm cross rail adjustment - vertical: 800 mm faceplate speeds:: 2,5 - 280 workpiece weight: 12 t feeds: 1 - 6000 mm/min max. torque on the faceplate: 50000 Nm Bdsdsvb Db Nopfx Akxob total power requirement: 85 kW weight of the machine ca.: 41 t dimensions of the machine ca.: 5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders *

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s Bdsdpfoyz Dtdsx Akxsb - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Bdodpfx Aksg U Utvoxjb Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.