Used Actuator for sale (526)

Condition: new, mileage: 20 km, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, EQUIPMENT: * Day Cab * Reinforced front chassis design * Mechanical cab suspension * External sun visor * Flexible cab step * Signal horns, 1 set * LED headlights and fog lights * Headlight beam pattern for right-hand traffic * Two LED work lights on cab rear wall * Beacon mounting preparation on front of cab * Grab handle and surround: black, side panels: cab color * Windshield with sun protection film * DAF Corner View system * Central locking, 3 keys, 2 remote controls * Leather steering wheel * Luxury trim for interior panels * Driver's seat: Luxury Air * Armrests on both sides of driver's seat * Passenger's seat: "Cinema", fabric upholstery * Dashboard table * Center storage compartment * Refrigerator or coolbox * Curtains, without partition curtain * LED interior lighting * Automatic cab climate control * Auxiliary heater with heat pump and timer * Roller blind driver's side * Roof hatch with electric control * FMS connector, extended/prepared Cgsdpfx Akjwkl Dvoxot * DAF Connect system * Digital tachograph, VDO 1C, Version G2V1 * DAF Infotainment Luxury Plus, luxury speakers * Antennas: DAB-prepared, 2x mobile radio, GNSS, CB extra * Adaptive Cruise Control with FCW and AEBS-3 * Wireless charging device * Lane departure warning system * Electronic stability control (VSC) * Reversing warning system * Standard immobilizer * Front: 8.00 t, parabolic, 167N * Front axle 1, 8,000 kg, load index 156 * Rear suspension 21.0 t / brakes 21.0 t * Rear axle capacity 10.50 t 10.50 t * Rear: 21.00 t, trapezoidal, HR1670T * Rear axle 1, 12,600 kg, load index 148 * Extra high front leaf suspension * Front axle(s): 385/65R22.5 * Driven rear axle(s): 315/80 R22.5 * Goodyear * Steel disc wheels, silver-grey * Silver-grey wheel trims * MX-13 engine, 390 kW / 530 HP cab emblem: 530 * Emissions standard Euro 6 * ECO power * Idle cut-off automatic, 5 minutes * Automated transmission, TraXon, 12-speed * 12-speed TraXon transmission 12TX2610 OD, 12.92-0.77 * Maneuvering mode * Automated transmission with manual override, full version * Off-road function with rocking mode * Rear axle ratio 3.61 * Mechanical differential lock * Traction control (ASR) * ZF Intarder * Pneumatic control for parking brake * Spring-actuated brake cylinders on first front axle * Spring-actuated cylinders on tandem rear axles 1 and 2 * Parking brake assistant * 2-cylinder compressor without clutch * Driven rear axle with drum brakes * Wheelbase 4.05 m / rear overhang 1.50 m tipper * Longitudinal members 310/7.0 mm, with inner reinforcement front/rear * EAS unit right, vertical; 45-liter AdBlue tank left * Steel compressed air reservoirs * 340-liter aluminum fuel tank left, height 505 mm * Splash protection * Suitable for drawbar applications, type plate, up to max. GCW * Crossmember D200, Ringfeder coupling D200 * Pneumatic trailer connection, swivel coupling * Electric connection trailer 24V/15-pin cable, 15-pin EBS * CAN J1939 functions at body builder connector * First gearbox PTO NH/4c-R-27/30 * 110 A alternator, batteries 2x 230 Ah * Heated fuel pre-filter * Dust shield * Warranty Plus – drivetrain: 3 years / 200,000 km * Technical inspection prior to delivery Day registration: 17.12.2025 BODY – MEILLER TRIGENIUS D316 - Fixed bulkhead raised by 200 mm, welded-on, with baffle plate adapted to installation space - Bordmatic system on the left (1 Bordmatic cylinder) - Pendulum right side wall with manual claw lock - Pendulum rear wall with automatic cam lock

Condition: new, power: 167 kW (227.06 HP), fuel type: diesel, overall weight: 11,990 kg, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,496 mm, total height: 2,369 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Equipment: * 12t distributor, extended day cab, roof-mounted air intake * Mechanically reinforced cab suspension * Extended day cab * Central locking system, 3 keys, 2 remote controls * Exterior sun visor, green and translucent * Fog lamps and cornering/turning lights * Halogen headlamps * Daytime running lights * Green tinted windows * Electrically adjustable mirrors * Front mirror * Reversing camera * Adjustable roof spoiler * Pneumatic steering column lock * Roof hatch with manual operation * Driver's seat: air-suspended luxury seat * Driver's seat armrest * ECAS remote control * Converter 24 V to 12 V, 15 A, 180 W * Soft-touch steering wheel, black * Passenger seat: fixed, velour cover * Engine tunnel storage compartment * Air conditioning * Power windows * Digital tachograph, VDO 1C, version G2V2 * Adaptive cruise control with FCW and AEBS-3 * Pre-installed for toll system * Speed limiter setting: 85 km/h * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS interface, prewired * FM/DAB/DAB+ radio with speakers incl. phone connection * Driver Performance Assistant Cgsdpfx Aksxngw Njxot * Lane change warning system * Electronic stability control (VSC) * Reverse warning system * Hill start assist * DAF Side and Turn Assist * Alcohol interlock, pre-installed * Speed limit recognition * DAF Drowsiness Detection * Compliant with UN regulations R155 and R156 * Rear: 8.50 t, air suspension, SR8.14 * Front: 4.50 t, parabolic, 45N * Front axle 1, 4,480 kg, load index 136 * Rear axle 1, 8,480 kg, load index 134 * Goodyear * Tire pressure monitoring system * Front axle(s): 245/70R17.5 * Driven rear axle(s): 245/70R17.5 * F1, 245/70R17.5 GO KMAXS2 136/134 M Steering CCA 3P * R1, 245/70R17.5 GO KMAXD2 136/134 M Traction CCA 3P * Rear axle ratio 3.73 * Mechanical differential lock * 8-speed PowerLine 8AP1000 overdrive transmission, 4.89–0.64 * Engine PX-7, 167 kW/227 hp. Cab badge: 230 * Emission standard Euro 6 * Traction control (ASR) * Idle shut-down automatic, 5 minutes * PowerLine automatic transmission, 8-speed * Parking brake actuator w/ test position * Exhaust brake * Wheelbase 5.40 m / rear overhang 2.43 m * Plastic fuel tank, 185 l * Front underrun protection * AdBlue® tank 30 l, right chassis side * Battery box left * Longitudinal frame member 210/6.0 mm, without inner reinforcement * EAS unit right, directed rearward to right * For use with drawbar, nameplate, max. GCW * Pneumatic trailer connection, turntable coupling * Crossmember D85-Dc70-V25, coupling D85, installed * Trailer electrical connection + EBS, 24V/2x7-pin * Body mounting preparations BAM 1, loose brackets * Fixed connector for engine speed control on chassis * Body connector on chassis * Side marker lights * Tail-lift application * Alternator 100 A, batteries 2 x 175 Ah * Max. gross combination weight (drive train) 20,000 kg * Technically approved gross vehicle weight chassis max. 11,990 kg * Roof intake, behind cab * Heated water separator * Driveline Plus Warranty - 3 years/200,000 km First day registration: 12.12.2025 Payload: 5,620 kg Spier box body build Internal body length: 7,200 mm Internal body width: 2,496 mm Internal body height: 2,369 mm Internal portal width: 2,470 mm Internal portal height: 2,310 mm Unladen body weight excl. additional equipment: 1,560 kg Number of pallet spaces: 17 Galvanized steel rear frame, open rear portal, top rear flap with gas strut Subframe as steel structure, crossmember spacing 500 mm Floor approx. 24 mm thick, made of special multi-layered floo

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm Cgsdpfx Akjwf Hm Isxjt • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play.

Condition: new, Year of construction: 2026, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Codpfxev R Tgto Akxsgt Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: good (used), Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available -Price: per piece -Dimensions: 220/200/H120 mm Cgsdpjrgbu Hefx Akxot -Weight: 1.9 kg/pc.

Condition: new, Year of construction: 2025, neu 2025 060103 prompt, Zwischenverkauf v Türkei 7500 € 121.59 € 1 6300 € 350 mm 350x32x63 mm 45 / 80 U/Min 45 ° 45 ° rund 115 mm / quadratisch rund 110 mm / quadratisch rund 110 mm / quadratisch 1,8 / 2,2 kW 1100 mm 1000 mm 1400 mm 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included Cgsdpfswmf Uasx Akxjt OPTION: saw blade Dm. 350 mm € 180,00

Year of construction: 1972, condition: not inspected (used), machine/vehicle number: SW3a DP. U. AP. 40923 , sheet shear : A used sheet shear (swinging cut) from the manufacturer Wieger. At the foil or sheet shearing , the cutting gap does not need to be adjusted for cutting different sheet thicknesses. Max. Cutting Power = 10 mm Model or Type: SW3a DP. U. AP. 40923 (with lamellae working clutch with brake, electropneumatically actuated) Construction year: 1972 Condition: used (good) Codpfx Aked Eg Ngexjgt

Condition: excellent (used), mileage: 133,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster - Remote-controlled central locking - Refrigerator - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Toolbox - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Csdeyvtkbspfx Akxjgt Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Front axle 1: steered Front axle 2: steered Rear axle 1: steered Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...

Condition: like new (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 220 cm³, Technical Data - Clamping Unit Clamping force: 1600 kN Tie bar spacing (h x v): 520 x 520 mm Platen size (h x v): 760 x 760 mm Minimum mould height: 250 mm Maximum mould height: 600 mm Maximum daylight: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Mould weight: 1250 kg Technical Data - Injection Unit Screw diameter: 40 mm Shot volume: 220 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 175 mm Screw speed: 420 rpm Plasticising rate (PS): 33 g/s Cgsdpfsyk T I Uex Akxot Free shot weight (PS): 224 g/s Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions (L x W x H): 5.9 m x 1.7 m x 2.2 m Total weight: 8,400 kg Equipment Display language: German Hydraulic core pull, 1x Core pull unit, hydraulic Machine without material loader Needle shut-off nozzle, pneumatically actuated EUROMAP 63 interface

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optiturn Premium CNC lathe directly from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with a Siemens SINUMERIK 828D control system. • Heavy-duty construction • Renishaw measuring arm for manual tool measurement • Ball screw with enhanced precision, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoders for maximum accuracy • 45° slant bed design for particularly large workpieces • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and driven tool capability • Hardened and precision-ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling button and emergency stop impact switch greatly simplifies program setup • Belt-style chip conveyor • Worklight for complete illumination of the work area • Coolant system with cleaning gun Linear Guideways • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic turret head VDI 40 • All 12 turret stations powered by an integrated motor capable of speeds up to 4,000 rpm Machine Bed • Heavily ribbed • 45-degree inclination • High rigidity and durability • Facilitates chip removal SAFETY Integrated – Setup with the door open • Functional safety also protects against high costs! Complete Package • Safety Integrated • Remnant detection and machining • ShopMill step programming • Manage network drives • 3D simulation • Remote view/assistance SIEMENS OSS Plus Additional Package • 12 months; Item no. 3589020 • 24 months; Item no. 3589021 • 36 months; Item no. 3589022 Dimensions and Weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work Area Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis (factory option) Angular accuracy: 51 '' Repeatability: 20 '' Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Speed Range Speed range: 30 – 4000 rpm Rapid Traverse Speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Mount: MT 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Cedpfxsymk Uko Akxogt Spindle Spindle nose: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle taper: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical Spindle Drive motor power S1 continuous duty: 11 kW Drive motor power S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque S6-30%: 140 Nm Feed Force Feed force, X-axis: 8.4 kN Feed force, Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN 5480 Number of tool stations: 12 Drive motor power: 4.82 kW Max. permissible speed at tool coupling: 6000 rpm Max. tool torque: 20 Nm

Condition: as good as new (ex-display), Year of construction: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Dimensions and Weight: - Max. width/depth: 2300 mm - Approx. length: 2530 mm - Approx. width/depth: 1595 mm - Approx. height: 1795 mm - Approx. weight: 2600 kg Working Range: - Chuck diameter: 150 mm - Chuck clamping actuation: hydraulic - Centre height: 223 mm - Centre distance: 850 mm - Swing diameter over bed: 446 mm - Swing diameter over gap: 520 mm - Swing diameter over cross slide: 240 mm - Bed width: 300 mm Servo Torque: - X-axis: 6 Nm - Z-axis: 8.5 Nm Spindle Speed Range: - Number of speed ranges: 1 Cgjdpsymkwrsfx Akxot - Spindle speed range: 10 – 3000 rpm Electrical Data: - Drive motor power: 7 kW - Voltage: 400 V - Network frequency: 50 Hz - Total connected load: 23 kVA Accuracy: - Repeatability: ± 0.005 mm - Positioning accuracy: ± 0.005 mm Hydraulic System: - Motor power: 0.75 kW - Tank capacity: 50 l Ball Screw: - X-axis diameter: 25 mm - X-axis lead P: 5 mm - X-axis accuracy grade: C3 - Z-axis diameter: 40 mm - Z-axis lead P: 5 mm - Z-axis accuracy grade: C3 Coolant System: - Coolant pump power: 270 W - Tank capacity: 90 l Machine Data: - Spindle bore diameter: 40 mm - Drive motor torque: 33 Nm Tailstock: - Taper: MT 4 - Quill travel: 165 mm - Quill diameter: 52 mm Spindle: - Spindle nose: DIN ISO 702-1 No. 5 - Spindle bore/bar capacity: 52 mm Controller: - Type: Sinumerik 828D PPU 240 - System software: SW 24 - CNC memory: 3 MB - Look Ahead: 50 - Block change time: 3 ms - Number of tools: 128 Travel: - X-axis: 250 mm - Z-axis: 760 mm Vertical Spindle: - Drive motor continuous power S1: 7 kW - Drive motor S6-30% duty cycle power: 16 kW - Drive motor torque: 33 Nm - Drive motor torque S6-30% duty cycle: 80 Nm Feed Rate: - X-axis: 15,000 mm/min - Z-axis: 15,000 mm/min Feed Force: - X-axis: 7.5 kN - Z-axis: 5.3 kN Tool Changer: - Type: hydraulic; VDI 30 - Number of tool stations: 8 - Max. square tool shank height/width: 20 x 20 mm - Max. boring bar diameter: 25 mm Features: - Siemens spindle and servo motors - Full enclosure with safety interlock - Standard with max. spindle speed up to 3000 rpm - Automatic central lubrication - Swiveling control panel - Tailstock cover - Electronic hand wheels for X and Z axes - Coolant system with 90-liter tank - RJ45 connection, USB port, and 230 V power socket - EMC (Electromagnetic compatibility) - Six leveling feet - Operator tools included SINUMERIK 828D Basic – COMPLETE PACKAGE - Safety Integrated - Remainder material detection and machining - ShopTurn step programming - Network drive management - 3D simulation - Graphical tracking Control: - 10.4” color display - 4:3 format - User-friendly SINUMERIK Operate software - Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card Guides: - Rigid flat-bed guideways Ball Screw: - For high rapid traverse speeds on all axes - Reduced wear - High positioning and repeat accuracy

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Csdpfxoi A A Tbj Akxsgt Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GERARING HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: Cedpfxoy A Ngle Akxogt -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5 are used.

Condition: used, Year of construction: 2011, functionality: limited functionality, roll diameter: 50 mm, Equipment: safety light barrier, Fully Automated Roller Conveyor System ARTIS-A – Complete Line for Filling and Mixing Increase your production efficiency with this robust conveyor system designed for the handling of plastic containers from filling to dispatch. This modular assembly consists of four interconnected powered conveyors, ensuring a smooth material flow. The system excels in intelligent product sequencing, transferring items from a three-lane infeed to a single lane via a transverse conveyor, and features integrated stations for automatic pigment dosing and material mixing. The equipment is fitted with premium components (Siemens, Yaskawa, IMI), guaranteeing long service life and high reliability in industrial operations. Technical specifications: Condition: Used, fully operational, operated in both 'Manual' and 'Auto' modes. Regularly maintained (chain lubrication, optical sensor cleaning). Currently disassembled into individual modules. Overall line length: Modular system made up of several sections: * Main Conveyor I: approx. 3.65 m * Transverse and Pigmenting Section: approx. 1.1 m and 2.2 m * Dispatch and Mixing Section: approx. 3.8 m Conveyor width: Usable width for triple-lane operation (~1400 mm), followed by single-lane sections (roller lengths 300 mm and 500 mm) Rollers: High-quality DRAŠAR rollers, 50 mm diameter, made of steel/PVC/Al, fitted with ZZ bearings and lip seals suitable for dusty environments Drive and Motor: Siemens motors (1LA series) with ELPRIM gearboxes Control: Stepless speed adjustment via Yaskawa J1000 frequency inverters housed in a central control panel Pneumatic system: Fully equipped with IMI International components (lift actuators, valves) Accessories included: * Central electrical control cabinet with control panel and emergency stop Cgsdpfx Akjywikajxst * Pigment dosing station (24 canisters, each 3 liters) * Pneumatic mixing device with automatic drip tray * Complete set of optical sensors for automatic line cycling Reason for sale: Production area reorganization and transition to new technology.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Csdpfxsywgaxj Akxjgt Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: used, mileage: 298,811 km, power: 132 kW (179.47 HP), first registration: 06/2010, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space volume: 23 m³, loading space length: 4,175 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, Year of construction: 2010, Equipment: ABS, tail-lift, TGL 8.180 BL refrigerated box body 4.10 m with tail lift, 1 ton capacity. * THERMOKING MD-200 (diesel engine) + stationary cooling 380 V ELECTRIC * Vehicle number for customer inquiries: 4100 * Environmental badge (green) * Euro 5 engine specification * Rear axle air suspension * Tail lift * Anti-lock braking system (ABS) * Engine with start/stop system * 2-seater * Power steering * Electric side mirrors * Bluetooth * Pneumatically actuated engine brake * Manual transmission * Full service history * 2/3-door No liability for typographical or printing errors Sale exclusively to trade customers Subject to prior sale and change. Modifications, interim sale, and errors expressly reserved. The description serves identification purposes and does not constitute a guarantee in the legal sense. Only the details specified in the purchase contract are binding. * TOP SERVICE + QUALITY Cgsdpfxju Sc Efo Akxet * We are happy to provide you with a LEASING, FINANCING or HIRE PURCHASE offer Warranty insurance available on request from the insurer * TÜV / UVV tail lift / tachograph inspection and installation of OBU device by our local partners * Customs number plate available for 30 days All export documents can be provided, but must be requested individually * Toll-Collect MAUT can be booked on site * Free transfer from Stuttgart Airport or Metzingen Railway Station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit our website at * Over 200 vehicles in stock at all times

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Cjdpjyhxppjfx Akxogt Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Large flow industrial HVAC networks

Year of construction: 2023, condition: new, SAMMET On/Off Damper 1000×500 mm Rectangular Section Industrial Damper – SAMMET® On/Off Damper Equipment designed for binary control (open/close) of air or process gas flow in high-demand industrial installations (power plants, FGD, incineration, dedusting, hot process, isolation systems). Manufacturer: SAMMET Dampers Oy (Finland) Model: On/Off Damper Serial number: 23012‑2129534 Year of manufacture: June 2023 Compliance: CE – Full nameplate present Cgedpfxoyhxmzo Akxst Nominal section (rectangular DN): 1000 × 500 mm Total weight: 164 kg (reinforced steel structure) Construction: welded steel frame, industrial-grade sheet metal, peripheral flange Actuation type: Mechanical On/Off with installed actuator Blade type: Reinforced rectangular blade (central shaft) Closing method: Full shut-off (shut-off type) Main material: Industrial painted carbon steel Sealing: Standard design for air/gas isolation (not 100% gas-tight) This damper is particularly suitable for installations requiring reliable on/off isolation, such as: - Hot air or gas circuits - Combustion or incineration plants - Dedusting / filtration / FGD systems

Year of construction: 2023, condition: new, Brand: SAMMET Type: On/Off Damper Serial Number: 23012‑2129521 Weight: 47 kg Size: DN400 (circular butterfly damper) Manufactured: June 2023 Tag: HS‑270‑800 Configuration: LIN mounting (Sammet-specific orientation/positioning) SAMMET On/Off Damper DN400 1. Product Description SAMMET® On/Off Circular Industrial Damper – DN400, designed for the isolation or full opening of air or process gas ducts. Intended for use in sectors such as power generation, incineration, dust extraction, thermal processing, and industrial ventilation. 2. Technical Specifications 2.1. General Model: Circular On/Off Damper Nominal Diameter: DN400 Weight: 47 kg Construction: Painted steel, circular flanged frame Actuation: Butterfly disc operated by mechanical actuator Orientation: LIN (Sammet-specific configuration) Action type: Opening/closing Typical applications: Air flow, hot or dusty gases, process applications Performs well under moderate differential pressure Low pressure drop when fully open 3. Applications Power plants / industrial boilers Dust extraction systems (ESP, bag filters, etc.) Incineration & flue gas treatment Cgsdpfjyhxm Usx Akxst Metallurgy, cement, petrochemical processes High-temperature industrial ventilation Air/gas circuits requiring simple but reliable isolation 4. Condition & Packaging Condition: New, never installed

Condition: used, maximum load weight: 14,440 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 06/2024, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 400 mm, Equipment: ABS, HUMBAUR HBTZ 197224 BS-Premium Beveled Tandem !!!FOR RENT!!! * Day registration, unused * 19,000 kg technical gross weight, 18,000 kg permitted gross weight * German vehicle * As-new condition * Payload 14,440 kg * 50 mm towing eye * Wheelbase 1,400 mm * 400 mm aluminium drop sides * Loading height approx. 870 mm * Drawbar length approx. 1,800 mm * Coupling height approx. 750-1,050 mm * Approach angle approx. 13° * SAF axles * Air suspension * Pneumatic lift and lower function * Drum brakes * Rear end beveled * Telescopic folding supports at rear * Gear support winch, 12 t load and quick gear * Ramp length 3,100 mm * Ramp width 760 mm * Air connections with red and yellow coupling heads * Galvanised, continuously height-adjustable drawbar * 15-pin power socket * ABS connection * Loading area (L/W/H): 7,200 mm / 2,450 mm / 400 mm * Front wall, galvanized steel, removable, 400 mm * Softwood floor, 40 mm * 4 pairs of lashing rings, each with 8,000 daN tensile force * 8 pairs of lashing rings, each with 1,000 daN tensile force * Ramp actuators: 1 spring mechanism per ramp * Ramp safety with locking tensioner Subject to prior sale and errors reserved! Sale exclusively under our General Terms and Conditions. Cgjdjp Ncw Depfx Akxjt Important Note – Important Information: Despite careful verification of all details in our offer, errors may occur. Some may result from transmission errors in the systems of various platform providers. Therefore, please note that all information is supplied without guarantee and does not constitute a legal claim. Legal Notice: This advertisement does not constitute an offer as defined by §145 BGB. Rather, it serves as information for contract initiation. The details provided here are without guarantee and do not represent warranted characteristics.

Condition: good (used), CHP natural gas, 2 pieces Onsite Energy ME3042L3 Bj 2009, Engine: MTU E3042L9 year 2016 23.000h operating hours, Generator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorber chiller: Carrier 16LJ-A24E 689KW cooling capacity Emergency cooler: Güntner GFH 090.2B/2x2-M 12m chimney, silencer, pumps, actuators, dampers, valves, gas control system Higher-level control: synchronization, load management, island operation, grid support, ec , load control cabinets Cedpeun I N Hofx Akxegt 714KWe, thermal 1058KW, cooling 689KW

Condition: used, mileage: 66,257 km, power: 81 kW (110.13 HP), fuel type: diesel, gearing type: mechanical, first registration: 06/2020, next inspection (TÜV): 10/2027, emission class: none, color: grey, driver cabin: other, suspension: other, number of seats: 9, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, * Appointment scheduling for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn't spend it waiting. For this reason, we kindly ask you to schedule a consultation or test drive appointment by phone. * Service booklet * Non-smoker * This vehicle has a well-maintained digital service record at VW. * Last service performed at 57,984 km. TRANSMISSION / CHASSIS * Engine 2.0 L - 81 kW TDI * 5-speed manual transmission APPEARANCE * Bumpers in grey * Exterior mirror housings and door handles in black * Interior loading edge protection (plastic) * 18-inch alloy wheels * Radiator grille with chrome trim * 'Transporter' badge on the fender * Full wheel covers for 16" wheels LIGHTING & VISIBILITY * Daytime running lights * Interior LED lights in load/passenger compartment * Heated rear window * Exterior mirrors convex, left * Exterior mirrors convex, right * Exterior mirrors electrically adjustable and heated * Interior mirror with anti-dazzle function * Tailgate with glazing * Laminated safety glass windshield * Headlight range control * Instrument panel illumination, dimmable * Step lighting in driver/passenger/load compartment ENTERTAINMENT * Voice control system * Multifunction display Plus * Bluetooth mobile phone interface * 4 speakers: 2 tweeters, 2 woofers * ECE regional code for radio * Prepared for We Connect and We Connect Plus * Discover Media streaming & internet audio navigation system (touchscreen, USB) ASSISTANCE SYSTEMS AND SAFETY * Driver assistance system: Hill Hold Assist * Driver assistance system: Brake Assist (HBA) * Driver assistance system: Multi-collision brake * Driver assistance system: Crosswind Assist * Emergency call system eCall * Driver fatigue detection * Single-tone horn * Central locking with remote control and interior actuation * Tyre pressure monitoring system * Isofix attachments for child seats on rear bench * Seat belt warning device (driver's side) * Start/stop system * Driver/passenger airbag * Deactivatable front passenger airbag * Electro-mechanical power steering Codpfxsxv Ut Is Akxsgt * Anti-lock braking system (ABS) COMFORT * Climatic air conditioning system (driver's cab) + auxiliary heater (load/passenger compartment) * Seat package: 9-seater, 3-3-3 (driver’s seat and double front passenger seat, 2-seat bench and single seat, 3-seat bench) * Driver’s cab seats: double front passenger seat with lockable storage compartment in seat box * Seats in load/passenger compartment, 1st row: 2-seat bench + 1 single seat * Seats in load/passenger compartment, 2nd row: 3-seat bench (coil sprung) * Sliding door, right, for load/passenger compartment * Sun visors with ticket pocket on driver’s side and airbag label on passenger’s sun visor * Lockable glove compartment * Additional soundproofing measures in driver's cab and passenger compartment * Enhanced interior noise insulation * Heat-insulating glazing * Adjustable steering column (steering wheel) * Without armrests on driver’s cab seats * Operating voltage 12V * Foldable grab handles in roof frame * Lashing eyes in load compartment * Flooring in driver’s cab: rubber * Head restraints, front and rear, height-adjustable * Flooring in load/passenger compartment: rubber * Windows in load/passenger compartment: fixed, front and rear right * Windows in load/passenger compartment: fixed, front and rear left * Electric window lifters OTHER * Wheelbase: 3,000 mm * and much m

Condition: used, Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 hp (30 kW), 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, rised and lowered by two hydraulical actuators. Together with mixer there are: - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. Cgodsyma Exjpfx Akxst - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices. Specifications: Power: 40 kW

Condition: used, functionality: fully functional, Röhm Spannstock SSP 315/3 - ID No. 161508 - Pneumatically actuated stationary clamping block Cgodpsyuwh Tefx Akxet - 3-jaw power chuck - Operating pressure: 6 bar - Clamping force: 111 kN - Outer diameter: 415 mm

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) NO CE mark, NO CE declaration of conformity Cjdpfx Ajyvh Nxekxsgt