Used Atlanta Other for sale (20,517)

Condition: used, Year of construction: 2008, machine/vehicle number: FA55, Machine OverviewThe ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation.Operating mode: AutomaticInfeed layout: Straight infeed (inline)speed: 1500 Paks/hour (PPH) Packaging: Tray wrap with neutral film overwrapFormat range: 0.5 L – 10 LMachine configuration: Delivered without container infeed system (to be provided by the line)Year of manufacture: 2008; Overhauled: 2022Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing.Key Technical DataModel: COMBIGIOTTO 90-MBrand: ATLANTAOperating condition: Ready for operationPackage configuration: Wrap + film on trayFilm type: NeutralTray: Available (tray packaging configuration)Machine feed type: Straight (inline)Format capability: 0.5 L to 10 L containersYear: 2008 (overhauled 2022)Automation & ControlIndustrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability).Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application.Integrated diagnostics, alarm history and counters (shift/lot totals).Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status.Electrical protection degree: IP54 for the electrical system and motors.Line IntegrationContainer infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator).Inline design simplifies alignment with fillers, labellers and downstream conveying.Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration.Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering).Condition & MaintenanceOverall status: Ready for operation.Overhaul completed in 2022 to restore full functionality.Preventive maintenance recommended: periodic inspection of film path and sealing elements, collation guides, tray magazine mechanisms, and conveyor chains/belts.Documentation and spare parts recommendations can be provided during commissioning and FAT/SAT... Iodsxdnbzepfx Abgjtf

Condition: used, Year of construction: 2008, machine/vehicle number: FA56, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Performance & Versatility Itedpfox H Thzox Abgof Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process. Site Requirements Electrical supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and earth). Auxiliaries: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC. Electrical enclosure protection: IP54; motor protection: IP54. Ambient conditions: temperature +5 °C to +40 °C; relative humidity 30%–80% non-condensing; altitude up to 1000 m a.s.l.; no harmful gases or explo...

Condition: new, Excavator class: 14.0 - 20.0 ton Weight: 1357 kg Beat rate: 350 - 650 bpm Itsdpslqakrjfx Abgof Working pressure: 150 - 170 kg/cm Oil volume flow: 90 - 120 l/min Chisel diameter: 125 mm All models are supplied with a chisel, hose set and tool box.

Condition: used, Year of construction: 1999, operating hours: 3,400 h, machine/vehicle number: 261724855, TRACTOTECHNIK GRUNODRILL 10S year: 1999 Working hours: Reading - hole diameter: max. 385 mm Itjdpfxehd I S Ue Abgsf - maximum torque: 2500 kN - tractive force 96 kN - compressive force 65 kN - max. drilling length 250 m - power: 90 kW - drill rods and bits included - complete equipment with separate engine, hydraulic power pack and tank for drilling fluid - engine Perkins 119 kW / 162 PS This offer is subject to change, input errors and mistakes excepted. Only the concrete agreements in the order confirmation or in the sales contract are valid. The basis for this contract are exclusively our General Terms and Conditions (GTC). These are available on our homepage at any time or can be requested from us. Place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me More Information Intended use: Construction,

Year of construction: 2016, condition: new, machine/vehicle number: 435505660, Complete new winch for rolled asphalt silo * NEW * More information Purpose: construction, Usable material: asphalt, Itsdpfxemwit Tj Abgsf

Year of construction: 2020, condition: new, machine/vehicle number: 373064736, Bitumentank horizontal Capacity: 50 m³ Ijdpfx Aboi Aqikogstf Thermal oil heated Condition: NEW This offer is subject to change, input errors and mistakes excepted. Only the specific agreements in the order confirmation or purchase contract are valid. Basis for this contract are exclusively our General Terms and Conditions (GTC). These are available on our homepage at any time or can be requested from us. The place of jurisdiction is Eberswalde, Germany. Further Information Intended use: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, Year of construction: 2015, machine/vehicle number: 457118676, Filler silo Manufacturer Lintec Capacity: 50m³ Dimensions (LxWxH): 12500mm x 2500mm x 2500mm Dead weight: Additional Information. Ijdpoiv Ixgjfx Abgjtf Intended use: construction, Empty weight: kg, General condition: very good, Technical condition: very good, Visual condition: very good, Suitable for the following machines: ASPHALT PLANTS, Transport dimensions (L x W x H): ,

Condition: ready for operation (used), Year of construction: 2010, working width: 1,350 mm, Belt sander manufactured in 2010. This Other S3 333 features a working width of 1350 mm and accommodates workpiece thickness from 3 to 160 mm. It includes three sanding units with powerful 4 kW motors and a conveyor group speed of 3-16 m/min. If you are looking to get high-quality sanding capabilities, consider the Other S3 333 belt sander we have for sale. Contact us for further details. • 1st Sanding Unit (Composition): Spinbrush • 1st Sanding Unit (Motorization): INV 4 kW Iedeyu Tfzspfx Abgotf • 2nd Sanding Unit (Composition): Brush • 2nd Sanding Unit (Motorization): INV 4 kW • 3rd Sanding Unit (Composition): Brush • 3rd Sanding Unit (Motorization): INV 4 kW • Conveyor Group: 3–16 m/min • Conveyor Group (Motorization): INV 3 kW • Adjustment/Rise (Motorization): MTR 0.37 kW • Vacuum Pump (Motorization): MT 4 kW • Mass: 4170 kg • Workpiece Thickness: 3–160 mm • Operating Voltage: 3 AC - 400 V • Frequency: 50 Hz • Current Draw: 48.9 A • Motor with Max Current Draw: 8 A • Minimum Compressed Air Pressure: 6 - 86 bar-Psi • Maximum Compressed Air Pressure: 8 - 116 bar-Psi • Compressed Air Consumption: 1441 Nl/min • Minimum Suction Flow Speed: 25 m/s • Minimum Suction Capacity: 6190 m³/h • Noise Level (Idle): 75 dB(A) • Noise Level (Operating): 76 dB(A)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,010 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 520 mm, total height: 2,700 mm, total width: 2,900 mm, overall weight: 5,350 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, product length (max.): 2,508 mm, number of axes: 3, This 3-axis NIKKEI VH-1010 was manufactured in 2007. It features a table size of 1200 × 450 mm and a maximum table load of 450 kg. The machine offers impressive axis travels with an X-axis of 1010 mm, Y-axis of 500 mm, and Z-axis of 520 mm. If you are looking to get high-quality machining capabilities, consider the NIKKEI VH-1010 vertical machining centre we have for sale. Contact us for further details. • Table • Table size: 1200 × 450 mm • T-slot: 5 / 75 / 18 mm • Distances • Spindle nose to table: 120 – 650 mm • Spindle center to Z-axis guide way: 540 mm Itsdpfoyu Sw Aox Abgof • Distance from Z-axis guide way to table center: 290 – 790 mm • Spindle • Spindle diameter: Ø65 mm • Feed rates • Rapid feed (3 axes): 15000 mm/min • Cutting feed: 1 – 5000 mm/min • General • Packing dimensions: 2788 × 2 × 2450 mm • Accuracy • Positioning accuracy: ±0.003 mm • Repeatability: mm • Other • Air pressure: 5 kg/cm² Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2019, machine/vehicle number: LC591, Used complete bottling line for CSD in PET and glass - 8000 bphTechnical Specifications & Performance DataThis complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments.Production speed: up to 8,000 bottles per hourCompatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0LContainers: PET and Glass bottlesMain filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping headsBlow molder: Easy Blow 4L (4,200 bph nominal)Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bphPack & handle application: SMI LSK 30 T Ergon shrink wrapper, SMI Pack HA-25 SX handle applicatorPallet logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; auxiliary manual wrapperProcess & utilities: GEA pasteurization station HTF 3000PIN/19; GEA CIP station; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G boosters)Inspection & coding: FT System control for volume/cap/label; Hitachi UX printerAdvanced Automation & Control SystemsThe line features modern automation and quality assurance for stable operation and repeatable product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while inline inspection and coding ensure compliance and traceability.PLC/HMI: PLC installed for centralized control and recipe managementInspection: FT System for volume, cap presence/position, and label verificationElectrical: 400V, 50 Hz, 16A reference (component level)Coding: Hitachi UX inkjet printer for date/lot markingChangeovers: Designed for multiple bottle formats across PET and glassSafety: Standard guarding and emergency-stop circuits across stationsProduction Line Integration CapabilitiesBuilt for flexible beverage production, the line integrates upstream preform handling and blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyors provide smooth bottle transport and accumulation.Upstream: Preform conveyor and hopper, Easy Blow 4L blow molderConveyors: Vetromeccanica Eolo air and line conveyor systemsFormat flexibility: 0.33L to 2.0L across PET and glassEnd-of-line: Shrink packaging, handle application, palletizing, and pallet wrappingUtilities integration: Chiller, steam boiler, compressors, air tanks, water... Isdpfx Aboyhbibjgetf

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 2,200 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 2000. This Other URSUS TC features a maximum turning diameter over bed of 600 mm and a longitudinal travel of 2000 mm. It also includes a controlled transverse travel of 300 mm and a maximum spindle speed of 2200 rpm. If you are looking to get high-quality turning capabilities, consider the Other URSUS TC machine we have for sale. Contact us for further details. • Centre height over bed: 300 mm • Maximum turning diameter over bed: 600 mm Technical Specification Itsdpfxeyud D Ij Abgef Counter Spindle No Driven Tools No

Condition: used, machine/vehicle number: TP1208021307, empty load weight: 4,570 kg, maximum load weight: 13,430 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2007, tire size: 435/50 r 19,5, Year of construction: 2007, Used vehicle platform trailer forwarding Itodpfxei Ri I To Abgsf

Condition: new, Comfortable, trendy food lounge that invites you to linger. Itsdpeyx Dpgsfx Abgsf The offer includes a long bench, any number of tables and chairs. The food lounge is also equipped with power sockets, ceiling lamps, a non-slip floor, a lockable side door and a complete long side of sliding glass doors. Price is plus delivery of 1.500,00 Euro net within Germany.

Condition: new, Year of construction: 2025, color: grey, Description Sea Container Our offer includes a comprehensive package of high quality, making it unbeatable. We source the gas appliances exclusively from certified manufacturers renowned for their quality. The installation as well as the entire kitchen and equipment are BRAND NEW! Colour: Anthracite Construction made of isothermal aluminium–fibreglass laminate for an outstanding visual appearance and optimal internal temperature in any season. Construction Dimensions: Length: 5,898 mm Width: 2,352 mm Height: 2,385 mm Catering Equipment Sea Container - Gas grill “Bertos”, smooth plate, dimensions (W x D x H): 600 x 600 x 290 mm, Output: 8 kW, made of stainless steel, G6FL6B - Gas fryer “Bertos”, 2 x 8 litre basin capacity, dimensions (W x D x H): 600 x 600 x 290 mm, Output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B - Gas cooker “Bertos” with 4 burners, dimensions (W x D x H): 600 x 600 x 290 mm, Output: 12.4 kW, made of stainless steel, G6F4B Cooling - Two undercounter refrigerators "Liebherr" - Upright display refrigerator suitable for beverages "Klarstein" - One small undercounter freezer "Liebherr" - Chest cooler, 4 to 10 degrees Celsius Water system - Water installation with canisters, 30-litre capacity with separate fresh and waste water tanks - Double stainless steel sink with mixer tap - Hygiene kit including paper towel and soap dispensers - 10-litre hot water boiler - Pump Additional Equipment Service and work surfaces made of brushed stainless steel Two sales flaps Insulated (fireproof) partition at the cooking area Extractor hood with labyrinth filters Non-slip flooring for commercial kitchens Optional sneeze guard Access via a side door One year warranty on structure and kitchen Iodpfx Aeyx Dpasbgstf The price applies to the standard equipment shown. Changes or additional equipment will incur extra charges. Naturally, this model can also be built to your specifications. Delivery time up to 6 months. Do you need a different fit-out for your sales trailer? Does your equipment require a higher payload or more sales flaps? Many vehicle details can be specified according to your needs!

Condition: new, Year of construction: 2025, color: grey, Container Description Our offer includes a complete package of high quality, making it unbeatable. We source the gas appliances exclusively from qualified manufacturers of high standards. The construction and the entire kitchen with all equipment are NEW! Container Details Availability: Ready for immediate delivery Color: Anthracite Delivery is included in the price, delivery to the curbside. Structure is made from isothermal aluminum-fiberglass laminate with excellent aesthetic appearance. Guarantees optimal interior temperature year-round. Dimensions Internal length: 5,898 mm Internal width: 2,352 mm Internal standing height: 2,385 mm Two new containers are for sale: Container 1: Empty – ideal for individual use or custom conversion The water system opening, circuit breaker box, two serving hatches, and ceiling lighting are already installed (see final images in the gallery). Price: €25,000 net Warranty: 1 year warranty on body and electrical system. This price applies to the standard configuration shown. Changes or additions will incur additional costs. Itodpfjyx Dn Ajx Abgjf Container 2: Fully equipped with professional foodservice equipment – ready to use, perfect for street food Price with equipment listed below: €39,500 net. Gastronomy Equipment; Kitchen made of stainless steel Gas Appliances: • Bertos gas cooker with 2 burners, dimensions (W x D x H) 300 x 600 x 290 mm, output: 6.2 kW, made of stainless steel, G6F2B • Bertos gas grill, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B • Bertos gas fryer, 2 x 8-litre basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 3 x 11-litre propane gas cylinders Refrigeration • Under counter refrigerator ‘Liebherr’ • Combination refrigerator Liebherr Water System • Water system with canisters, 30-litre capacity with fresh and waste water containers • Two stainless steel sinks with fittings • Hygiene package with paper towel dispenser and soap dispenser • 10-litre hot water boiler • Pump Lighting • LED ceiling lighting • LED lighting with color effects around the serving hatch, remote-controlled • Emergency light Additional fittings • Serving and work surfaces made of brushed stainless steel • Two serving hatches • Insulated partition at the cooking area (fire-resistant) • Extractor hood with labyrinth filters • Anti-slip flooring for commercial kitchens • Sneeze guard (optional) • Side door entry • Generator cabinet Warranty: 1-year warranty on body and kitchen This price applies to the standard configuration shown. Changes or additions will incur additional costs. We can also build this model to your custom specifications. Delivery time up to 6 months. Do you need different equipment for this sales vehicle? Does your equipment require a higher payload or more serving hatches? Many vehicle details can be customized to your specifications!

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Iodpfx Aboyx Dm Eegjtf Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: new, empty load weight: 1,700 kg, overall weight: 3,500 kg, color: grey, Year of construction: 2025, Equipment: hydraulics, A Contrailer is a perfect combination of a food truck and a container, offering you flexible usage options, ample space, and increased load capacity for the catering sector. Ijdpfsyx Dmrjx Abgotf You can use the Contrailer either as a stationary unit (like a container) or transport it flexibly to any location with a vehicle. Setting down the unit is easily accomplished via a hydraulic system. Our offer includes a comprehensive package of superior quality, making it unbeatable. All gas appliances are sourced exclusively from certified manufacturers renowned for high quality. The body structure and the entire kitchen, including equipment, are BRAND NEW! Color: Anthracite Body constructed from isothermal aluminum fiberglass laminate with an excellent aesthetic appearance. Ensures optimal interior temperature throughout all seasons. Body dimensions: Total length: 4,450 mm Total width: 2,400 mm Total height: 2,495 mm Vehicle Equipment - Gas Grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, stainless steel construction, model G6FL6B - Gas Fryer "Bertos", 2 x 8-liter tank capacity, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, stainless steel, with drain valve, model GL8+8B - Gas Cooker "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, output: 12.4 kW, stainless steel construction, model G6F4B Cooling - Compact undercounter refrigerator "Liebherr" - Display fridge with glass front, suitable for beverages, "Klarstein" - Refrigerator with integrated chest freezer "Liebherr", 340-liter capacity Water System - Water system with canisters, 30-liter capacity with separate fresh and waste water tanks - Double stainless steel sink with faucet - Hygiene package including a foldable towel dispenser and soap dispenser - 10-liter hot water boiler - Pump Additional Features - Service counter and work surfaces made of brushed stainless steel - Insulated partition wall at the cooking area (fire-resistant) - Extractor hood with labyrinth filters - Non-slip flooring for gastronomy - Sneeze guard available as an option

Condition: used, machine/vehicle number: NEW-54, Year of construction: 2012, Log stacker Svetruck, type TMF 15/11 year of construction 2012 Mileage 16370 lt. counter Total weight 58500 kg Machine dimensions complete in length x width x height 11400 x 3900 x 6000 mm Machine dimensions (disassembled) in length x width 7500 x 3900 mm Iedpehhkf Nofx Abgetf Height without dimensions 4700 mm Height without mast and mast support 4300 mm Machine dimensions mast in length x width x height 8000 x 1600 x 2000 mm Dimensions grapple in depth x width (closed) x height 1400 x 3600 x 4200 mm Length grab open 5200 mm, height grab 4000 mm Wheelbase front 1500 mm Height 250 mm (pole shield) Wheelbase rear 1600 mm Height 400 mm Lifting capacity telescope retracted max. 15000 kg Lifting capacity telescope extended max. 11000 kg Stacking height telescope extended (open gripper) 8000 mm Stacking height telescope extended (closed gripper) 7600 mm Reach center drive axis max. 6870 mm Drive via 6 cylinder Volvo diesel engine with 289 KW / 393 PS Displacement 12130 cm³ Transmission type Torque converter Automatic 3 forward ? and 3 reverse gears Driving speed 27 km/h Tire size 18.00 x 25? We will be happy to send you more data and additional pictures on request. This description is not a binding offer and may contain errors. No guarantee on all data.

Condition: ready for operation (used), Year of construction: 2024, total height: 2,500 mm, overall weight: 3,700 kg, This laminating press was manufactured in 2024. It features a robust servo-hydraulic drive system and operates at pressures between 6-8 bar. With a substantial footprint of 1000 × 2500 mm and a working table size of 1500 × 1000 mm, it is ideal for panel processing and interior components. Consider the opportunity to buy this Other COMAG MPM 1500-1000 T6-E laminating press. Contact us for more information. • Pneumatics and hydraulics: • Operating pressure: 6–8 bar • Drive system: Servo-hydraulic drive • Electrical data: • Electrical connection: 3 × 400 V / 50 Hz • Number of phases: 3L • Maximum power: 30 kW • Maximum current: 100 A • Applications: • Laminating, punching, and edge folding of panels • Trimming and edge foiling of panels • Processing of armrests and central armrests • Production of railings, handles, back covers, and door handles • Typical use: Ideal for panel processing interior components; also suitable for the furniture industry Dimensions Machine Depth 2500 mm Iedpfx Asyglkmsbgstf

Condition: used, color: white, overall weight: 18,000 kg, empty load weight: 2,900 kg, loading space width: 2,460 mm, loading space length: 7,280 mm, loading space height: 2,480 mm, machine/vehicle number: 701624-0, BDF steel swap body / swap container 7.45 m with roller door, storage container * Swap container / steel container with profiled outer wall * Storage container Iedpeqgd I Hsfx Abgetf * Roller door * Keyhole rails * Anti-slip plywood floor, forklift-accessible * Telescopic support legs * Parking height: 1.02 - 1.32 m * Manufacturer: SICOM * Passage height at roller door: 2.27 m * Light rust on frame and body * Paint flaking at roller door

Condition: new, diameter / mm Cutting (quantity) / 0 weight / kg Itjdpfxoymquwe Abgjf Atlanta 58 83 907 servo worm gear NEW packed. Type: 58 83 907 n1: 5000 rpm P: 5.20kW

Condition: new, machine/vehicle number: VASCA ADIGE NUOVA, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space volume: 28 m³, suspension: air, tire size: 385/65 r22,5, color: white, TIPPING TANK SEMI-TRAILER; VARIOUS 26/28 CUBIC METRE UNITS AVAILABLE; CONFIDENTIAL NEGOTIATION ON SITE; ELECTRIC COVER; LIFTING AND STEERING FIRST AXLE; DISC BRAKES; AIR SUSPENSION; Ijdpegw Ralefx Abgstf TYRES: 385/65 R22.5; WHEELBASE: 3000 MM;

Condition: new, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: 268955558, GREMAC e1 trommel screen Tandem chassis / axles 2x kg ( permissible total weight) kg empty weight without aggregate Overrun brake Vehicle lighting according to StVzO TÜV acceptance Drum length: mm Diameter: mm 4,0 kW electric drive speed adjustable with frequency converter driving screw adjustable cleaning brush hopper with conveyor belt rubber belt with chevron profile 0,75 kW electric drive Itsdjl Hbcfspfx Abgef speed adjustable with frequency converter Fine grain collecting belt Movable suspension Rubber belt in smooth design 1,5 kW electric drive Speed adjustable with frequency converter Fine grain belt Movable suspension Rubber belt with chevron profile 2,2 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Over-grain stockpile conveyor Movable suspension Rubber belt with chevron profile 1,5 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Control system PLC Siemens Logo Control panel with buttons and potentiometers 400V load circuit 24V control circuit Main switch Ceekon 16A socket EMERGENCY OFF relay Without generator Cladding Hot galvanized frame parts painted drum cladding powder coated in RAL7005 and 5018 Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: used, mileage: 925,000 km, power: 95 kW (129.16 HP), first registration: 04/2004, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 18,000 kg, overall weight: 27,500 kg, tire size: 295/60r22.5, axle configuration: 2 axles, wheelbase: 4,800 mm, color: white, gearing type: automatic, emission class: euro3, suspension: air, Year of construction: 2003, operation weight: 18,000 kg, Equipment: additional headlights, hydraulics, trailer coupling, Operating machine for moving swap bodies, trailers and semi-trailers Bosch Rexroth hydrostatic transmission Mercedes OM904LA engine 18.500h Itsdpfx Abopa Uylsgef Usable with B license

Year of construction: 2023, condition: new, machine/vehicle number: 383036928, 16x 120mm DTH drill pipe , 4000 mm x 85 mm , 2 7-8\" API Reg 02x Adapter shank 2 3-8\" API Reg Pin x 2 7-8\" API Reg Box 02x 140mm DTH drill bit 02x 5\" DTH Hydraulic breaker with DHD350 shank, 2 7-8\" API More information Itedpfx Aehypv Ujbgjf Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,