Used Construction Compressor for sale (20,936)

Condition: excellent (used), Year of construction: 2016, Construction compressor Manufacturer: Atlas Copco Model: XAVS 186 Year of manufacture: 2016 Operating hours: approx. 657 h - Delivery pressure: max. 14 bar - Flow rate: max. 11.4 m³/h - Power: 104 kW - Engine: John Deere 4045HAC05 Rodewubzropfx Aa Ijw - Aftercooler - Water separator - Weight: approx. 2.45 t

Condition: ready for operation (used), Year of construction: 2023, A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Rjdpfxsxu I Ddo Aa Iow

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Rsdpfx Aoxu I A Tsa Iew

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Redezf Ivuspfx Aa Iew Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Rjdpjy Iplfefx Aa Iew Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Available immediately Rjdpfx Aelhqdmsa Ijw

Condition: used, Bitzer compressor rack chiller -Type: 2 x HSK 6461-60, 2 x HSK 7451-70 -Volume: 2 x 165 m³/h, 2 x 192 m³/h -Cooling capacity: 620 kW at 0°C/40°C, 520 kW at -5°C/40°C, 420 kW at -10°C/40°C -Dimensions: 4300 x 1200 x 1500 mm -Stock quantity: 1 Rsdey Sk Ntepfx Aa Ijw

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Rjdpfsyb Sdiox Aa Isw

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar Rodpfxoyb Rquo Aa Iow YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer. Redpfxeq Nia Ij Aa Iow

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. Rjdpfxexaxr No Aa Iew 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Redpoq Nf Tvjfx Aa Isw Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Rjdpfxeyl S Ebj Aa Ijw

Condition: used, We offer pallets of approximately 5,000 kg open-type compressors, featuring a mix of Bitzer, DWM, and Bock units. This lot has been assembled for trade, export, and stock building purposes and is sold as a single complete batch. Rsdpfx Aaeycvkvo Iow The entire package is available for one fixed package price. No individual sales are offered. If you have any questions or require additional availability, please contact us.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: Rjdjxc T Evjpfx Aa Isw - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. Rsdpfx Aaoq I Nvie Isw ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: Rjdpfoq N Ud Iex Aa Iew - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. Rsdexqd T Hjpfx Aa Ijw 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Rsdpfjzf Afqex Aa Iew Operating temperature: 76 °C Volume flow: 131.9 l/s Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: used, Year of construction: 2013, Overview  This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Excellent, annual maintenance completed August 2025 - Optional equipment: Atlas Copco air dryer available - Status: Installed and connected, fully functional Redpfx Aoyb Thvsa Ijw

Condition: used, Year of construction: 2012, Overview  This low-pressure air compressor was manufactured in 2012 by the Swedish company Atlas Copco. The GA132 VSD model delivers up to 24.1 m³/min at a maximum pressure of 8.5 bar. The unit was fully reconditioned in 2025, including the installation of a new HMI, and is in excellent working condition. It remains installed and connected, can be inspected on-site, and is immediately available. Spare parts are included, and an Atlas Copco air dryer can be supplied optionally. Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min Rodpfx Asyb Thisa Iow - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Fully reconditioned in 2025 (new HMI) - Additional equipment: Optional Atlas Copco air dryer - Status: Installed and connected, fully functional - Availability: Immediate

Year of construction: 2010, condition: used, Used machine Used screw compressor from Schneider, type AIRMASTER AM 7-10, with refrigerated air dryer Schneider DK 985 ECO and compressed air tank. Year of manufacture: 2010 Technical data compressor: Volume flow: 930 l/min Final compression pressure: 10 bar Motor power: 7.5 kW Technical data refrigerated air dryer: Air volume flow: 985 l/min Max. operating pressure: 16 bar Refrigerant: R134a Air connection: 3/4 inch Power consumption: 0.3 kW Technical data compressed air tank: Redpozh Rt Iofx Aa Iow Tank volume: 270 l Max. operating pressure: 16.5 bar Availability: short notice Location: Flörsheim

Condition: new, Compressor AIRCRAFT Airprofi 703/100 – used – Galvanised tank, incl. pressure regulator, Year of manufacture 2018, unused, SPECIAL PRICE instead of promo price 1,699,-- Redpfxox Sx E Aj Aa Isw ----- Technical Data ----- Tank capacity: 100 litres, Max. air displacement: 650 litres, Max. pressure: 10 bar, Motor: 4 kW, Speed: 950 rpm, Sound pressure level: 93 dB - new demonstration unit -

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – ----- Technical Specifications ----- Max. pressure: 10 bar Motor: 7.5 kW Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Operating hours: 6,922 h Load hours: 2,083 h Year of manufacture: 2017 Rsdpfx Ajy Dp Swja Isw

Condition: excellent (used), Compressor AIRCRAFT ACS Duo – used – Galvanised tank, screw compressor, Rjdowb Evtjpfx Aa Iew incl. refrigerated dryer, incl. condensate treatment unit, automatic condensate drain ----- Technical Data ----- Tank capacity: 2 x 100 litres, Filling performance: 360 litres, Max. pressure: 10 bar, Motor: 3.5 kW, Speed: 2,880 rpm, Sound pressure level: 69 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg Quality Info: - fully cleaned - electrics checked - immediately ready for operation