Used Dcm Atn Leopard Lma for sale (1,517)

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Kdsdpsyx Uy Ajfx Abgek Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: new, Year of construction: 2025, operating hours: 30 h, operating pressure: 2,800 bar, pressure: 2,800 bar, fuel: diesel, overall weight: 2,800 kg, HAMMELMANN AQUA JET 144 Year: 11/2025 NEW MACHINE UNDER WARRANTY Kdodpfjyki U Rox Abgsk I have 5 machines from 2025 for sale Available for immediate delivery

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES Kjdpfoyh Nr Ujx Abgedk – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 2018, operating hours: 2,476 h, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Kubota Weights Empty weight: 5.250 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Max. horizontal reach: 850 m Kdjdpfx Aey D Dpwsbgsk Transport dimensions (LxWxH): (L/B/H): 6,06m / 1,99 m / 2,12 m Additional information Please contact Tobias Mayr for more information

Condition: good (used), Year of construction: 2016, operating hours: 2,154 h, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Kubota Weights Empty weight: 5.250 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm CE mark: yes Kdodpoy Dzp Usfx Abgsk Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Max. horizontal reach: 850 m Transport dimensions (LxWxH): (L/B/H): 6,06m / 1,99 m / 2,12 m Additional information Please contact Tobias Mayr for more information

Condition: good (used), Year of construction: 2015, fuel type: diesel, Weights Empty weight: 5.250 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.230 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 720 m Transport dimensions (LxWxH): 6,1x2x2,08 Additional information Please contact Christian Theißen for more information Manufacturer: ATN Model: Zebra12 Year of build: 2015 Condition: Used Kedpfx Ajywr Etobgsdk Data: Max. working height: 12,30 m Movable up to working height: 12,30 m Platform height: 10,30 m Max. reach: 7,20 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,52 x 0,87 m Transport dimensions LxWxH: 6,10 x 2,00 x 2,08 m Drive type: Diesel Empty weight: 5.250 kg Special features: Rotatable work basket, basket arm, pivot axis, solid rubber tires, PPE anchor points available.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,710 mm, total length: 1,660 mm, total height: 2,975 mm, maximum load weight: 3,000 kg, tank capacity: 2,380 l, overall weight: 150 kg, year of last overhaul: 2026, Ultrasonic cleaning unit with a capacity of 2,380 litres. This ultrasonic cleaning machine is equipped with a pneumatic lifting platform with a load capacity of up to 1,500 kg. The lift has three main functions, which are: 1. To assist with the loading and unloading of parts to be cleaned. 2. Assisting with cleaning in hard-to-reach areas, creating a gentle movement of the fluid that helps remove loosened dirt particles. 3. Preventing the ultrasonic action from concentrating on a single point, thereby avoiding marking on the parts to be cleaned when these are made of soft metals such as aluminium or zamak. Ultrasonic cleaning system with patented technology This ultrasonic machine is designed to cover a wide variety of industrial applications. Some of the main applications include: 1. Parts cleaning: Metal parts or mechanical components requiring the complete removal of residues and oils prior to assembly. 2. Degreasing of parts: Removal of grease and oil in equipment manufacturing and maintenance. Ksdpfoypcunex Abgedk 3. Stripping and removal of adhered contaminants: Removal of rust, varnish and other impurities. 4. Cleaning in the mechanical industry: Removal of welding residues and particles from electronic components without damaging them.

Condition: used, Year of construction: 2011, - Brand: ATN - Type: PIAF 1000R - Year of construction: 2011 - Hours: 613 hours - Weight: 2980 kg. - Drive: Battery - 24 Volt - Working height: 10 meters - Lateral reach: 3.5 meters - Lifting capacity: 200 kg. - Safety inspection possible - Aerial work platform book available - CE document available - Trade-in and transport possible * Brand: ATN *Type: PIAF 1000R * Construction year: 2011 * Weight: 2980 kg. * Drive: Battery - 24 Volts * Working height: 10 meters * Lateral reach: 3.5 meters * Lifting capacity: 200 kg. Kedpfxoyy Ir Uj Abgodk * Hours: 613 uur

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, lifting height: 1,000 mm, lifting power: 200 kg/m, fuel type: electric, Equipment: UVV, Transport and trade-in possible by arrangement. Kdedpfxoytn Ets Abgjk

Condition: used, Year of construction: 2017, machine/vehicle number: Z1617002WS, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 8.200 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.700 cm Max. horizontal reach: 930 m Transport dimensions (LxWxH): 7.7x2.24x2.25 Kdedpfxjtr Htrs Abgjk Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: Z1617003WS, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 8.200 kg Mast: articulated arm Lifting capacity: 230 kg Kjdsxwimropfx Abgjdk Working height: 1.700 cm Max. horizontal reach: 930 m Transport dimensions (LxWxH): 7.7x2.24x2.25 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, operating hours: 1,031 h, machine/vehicle number: Z1220006, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 5.250 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.220 cm Max. horizontal reach: 860 m Transport dimensions (LxWxH): 6.05x2x2.6 Please contact PFEIFER GROUP for more information Kdedpfxjtr Hy Hj Abgok

Condition: used, Year of construction: 2016, operating hours: 1,755 h, machine/vehicle number: P1216003, Drive: Wheel Kdedpfjtr Hvmjx Abgok Empty weight: 4.350 kg Mast: articulated arm Lifting capacity: 200 kg Working height: 1.200 cm Max. horizontal reach: 500 m Transport dimensions (LxWxH): 3.66x1.2x1.98 Please contact PFEIFER GROUP for more information

Condition: new, IG 280 SD Specifications Motors Grinding Spindle Motor 20HP, 200 - 2330RPM Rotary Table Motor 1HP, 5 - 70RPM Servo Column Motor 2KW Coolant Pump 3/4HP, 45GPM Table Diameter 24" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Custom Table Options 18" diameter T-slot or drilled for customer fixtures Contact a DCM Technical Specialist for other custom table & fixturing options Capacity Max Swing Diameter 27" Max Part Height 11" with a segmented wheel 12" with a 2A2T wheel Grinding Wheel Options Segmented Wheel Hub Kits 12" or 15" diameter 2A2T Ring Wheel Hub 12" diameter 6A2 Wheel Hub 8" diameter Cortland Chuck 12" or 15" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM AC motor driven Y-axis Electrical Requirements 230V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 80" wide, 68" deep, 90" high Weight Machine & Swarf System: 5,480LBS. Kjdjubbp Sepfx Abgedk Electrical Box: 960LBS. IG 280 SD Features • 24" variable strength electromagnetic chuck with auto demag cycle • 20HP variable speed grinding spindle motor • Thru-spindle vacuum/pressure feed • Integral air mist collection and coolant flow systems for clean and consistent grinding • Programmable touch screen HMI controls • Manual pulse generator for precise Z-axis positioning • Internal memory for saving grind process recipes to aid in quick changeover • Password protection and operator lock-out features • Automatic routine maintenance reminders • 76" x 64" Footprint

Condition: new, functionality: fully functional, IG 482 SD Specifications Motors Grinding Spindle Motor 50HP, 200 - 1180RPM Rotary Table Motor 3HP, 5 - 70RPM Servo Column Motor 5KW Coolant Pump 3/4HP, 45GPM Table Diameter 48" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Contact a DCM Technical Specialist for custom table & fixturing options Capacity Max Swing Diameter 52" Max Part Height 12" with grinding segments retracted 10-1/2" with a 2A2T wheel Grinding Wheel Options 2A2T Suberabrasive or Conventional Segments Kjdpfx Abjubbqiegodk 26" diameter Cortland Style Hub & Segment 26" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM Servo drive X-axis for precision positioning Electrical Requirements 460V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 137" wide, 82" deep, 88" high Weight Machine & Swarf System: 14,500lbs. (estimated) Electrical Box: 1,500lbs. (estimated) IG 482 SD FEATURES • 48” variable speed electromagnetic chuck with auto demag cycle • 50HP grinding spindle motor • Integral coolant filtration & mist collection systems • Easy to operate touchscreen controls • Mitsubishi FX5U PLC • 3 Grinding Modes - Conventional, Incremental and Grind to Height • Regrind feature allows re-running previous grind sequence without reprogramming • Continuous grind – the machine can automatically cycle through grind 1, 2 & 3 • Servo-driven precision control of both Z and X-axis with absolute home positioning • The cross slide X-axis moves with manual pulse generator • Backlash compensation on both axes • Password protection & operator lockout features • SECS/GEM Interfaced to work with 3rd party Scada type software • Password protection and operator lock-out features • Automatic routine maintenance reminders • 120" x 82" Footprint

Condition: used, Year of construction: 2020, General Information Year of construction: Jan. 2020 Model year: 2020 Color: Orange Dimensions and Weights Unladen weight: 940 kg GVW: 940 kg Dimensions (L x W): 165 x 185 cm Kdjdpfx Asxn R Rgjbgjk Functional Working width: 165 cm CE marking: yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none

Condition: used, Year of construction: 1986, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, disc diameter: 350 mm, A.COSTA LEOPARD /2/75 Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Maximum disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-expel latches Weight: ± 5,500 kg 2 spare sleeves and spacers Infeed table: Kjdjwi I Hkspfx Abgedk Infeed table connected to the main machine. Total length: 400 cm Number of rollers: 2 straight, 14 inclined. TOTAL: 16 lower rollers + 2 upper rollers Upper rollers with pneumatic pressure

Year of construction: 2021, condition: used, functionality: fully functional, Janser Belt Sander LEOPARD — Year of manufacture 2021 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Kdedpfxoy A E S Ds Abgek - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,300 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, WEBSTER & BENNETT DOUBLE COLUMN VERTICAL BORING MACHINE Kodpfxsyyzxuj Abgodk Model 120” ‘DCM’ Serial number 5914-1 Year 1970 Diameter of faceplate 108” 2743 mm Diameter of work turned with ram 120” 3048 mm Max. diameter turned for full travel of turret slide114” 2895 mm Diameter of work admitted 122” 3100 mm Height from faceplate to underside of cross-slide78” max. 1981 mm 24” min. 609 mm Vertical travel of ram 48” 1219 mm Vertical travel of turret slide 38” 965 mm Horizontal travel of ram or turret slide (Table centre outwards) 66” 1676 mm Minimum distance between centre of ram and turret slide (dependent on tooling) 30” 762 mm Centre to face of cross slide 17” 432 mm Smallest dia. hole toolholder and ram will enter 11 ¾” 298 mm Smallest dia. hole turret slide will enter 28” 711 mm Maximum load on table 44800 lb 20320 kg Number of feeds 12 Range of feeds .0025 - .125 ins/rev. Number of speeds 12 Range of speeds 2 - 53 rpm Main motor 50 HP Width 222” 5639 mm Front to back 186” 4725 mm Height 215” 5461 mm Approximate total weight of machine 100800 lb 45720 kg

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS Control: CNC Fanuc I Series Swing diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Kodeyvgztepfx Abgedk Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm C-axis Tool Carrier Turret: 12-position BMT 45 Driven tools: All 12 stations 2 x Radial driven tool holders 2 x Axial driven tool holders Chip conveyor MACHINE DETAILS Machine weight: 4 t LNS loader not included in the offer Machine was used primarily for plastics Cutting hours approx. 4,000 hrs.

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested Kjdpfxofbma No Abgodk -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: ready for operation (used), Year of construction: 2016, Gebr. Wagner Piston Pump Leopard 35-70 - Spraypack Airless -+ Year of manufacture: 2016 Technical data: Kedpfx Abjx N E Sqsgedk Transmission ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Displacement per double stroke: 70 cm³ Max. stroke rate: 60 DH/min Max. delivery rate: 4.2 l/min Air consumption at 6 bar per double stroke: 18.6 nl - immediately available -

Condition: excellent (used), Year of construction: 2016, Kliper DCM 90, lightly used, fully operational. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Kdodpfeykrxlsx Abgjk

Condition: ready for operation (used), Simens 6RA8025-6GS22-0AA0 SINAMICS DCM DC-Converter SN: Q6H22450101, used, good condition, 100% functional, scope of delivery as per photos Kdodsxahzgspfx Abgjk

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW Kdjdjw H R R Hjpfx Abgsk – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg