Used Delapena Speedhone Eas for sale (554)

Condition: ready for operation (used), functionality: fully functional, Good condition Itedpfxeyif A Se Abgjf Speedhone Electronic Ea

Condition: used, Honing machine DELAPENA SPEEDHONE EA Itedpfx Asv R Hv Uebgsf

Condition: used, TECHNICAL DETAILS - Capacity - Diameter : 80 [mm] Itedpfxsvxlipe Abgsf - Speed : 1000 [rpm] - Machine floor space : 120 x 100 x 150 [mm] - Machine weight : 229 [kg]

Condition: used, TECHNICAL DETAILS - Capacity - Diameter : 80 [mm] - Speed : 1000 [rpm] - Machine floor space : 120 x 120 x 150 [mm] Itedpfx Aevxlivobgef - Machine weight : 283 [kg]

Year of construction: 2022, condition: ready for operation (used), An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible. Isdpfx Aevfft Uobgstf

Condition: like new (used), Year of construction: 2022, table length 1600 mm table width 1000 mm burner heads 1 Control RDC6445G Control System laser capacity in Watt 80 travel -x axis 1600 mm travel -y axis 1000 mm travel -z axis 300 mm weight of the machine ca. 300 t dimensions of the machine ca. 2,2 x 1,8 x 1,1 m Itjdpfxjxcblkj Abgjf

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 2,380 mm, overall weight: 3,725 kg, product length (max.): 2,145 mm, This 4-axis Mitsubishi EA 12S die-sinking EDM machine was manufactured in 2016 in Japan. It features X/Y/Z travels of 400/300/300 mm, a maximum workpiece weight of 700 kg, and a stainless steel table measuring 700 × 500 mm. Equipped with a C-axis and Erowa chuck, it also includes a dielectric filtration system with a 400 L tank. Consider the opportunity to buy this Mitsubishi EA 12S die-sinking EDM machine. Contact us for more information about this machine. Itjdpjx Uq Syofx Abgof • Maximum Workpiece Dimensions: 850 x 640 x 250 mm • Maximum Workpiece Weight: 700 kg • Maximum Electrode Weight: 50 kg • Table Dimensions (LxW): 700 x 500 mm • Table Surface: Stainless steel • C-axis with Erowa Chuck: 152.5 – 452.5 mm • Maximum Dielectric Filling Level Stroke: 300 ml • Filtration System: Yes • Tank Capacity: 400 L • Filter Particle Fineness: 3 / 2 µm • Dielectric Temperature Control: Yes • Pulse Generator Power Supply with Transistor Control • Cooling Method: Fully Sealed, Indirect Air Cooling Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Altezza punte sul banco mm 340 Distanza tra le punte mm 3000 Passaggio barra mm 65 Diametro max. ammesso sul banco 680mm torretta tipo C fornita di cartelle Fissa lunette Mandrino PINTO Iodpfxswqfkco Abgotf

Condition: used, Year of construction: 2012, Equipment: ABS, Empty weight: 1.880 kg Carrying capacity: 2.620 kg Itjdpfjyn Nfkox Abgsf GVW: 4.500 kg Front tyre size: 235/75 R 17,5 Rear tyre size: 235/75 R 17,5 Please contact Emal Jaweed for more information

Year of construction: 2021, condition: used, color: orange, maximum speed: 90 km/h, Equipment: air conditioning, First registration: 2022, ©farmpartner-tec GmbH: UNIMOG, ©farmpartner-tec GmbH_____We are offering for sale a used Mercedes Benz Unimog factory demonstrator from the 2021 model year with approximately 650 operating hours and about 26,000 kilometers, equipped as follows: 299 HP, 6-cylinder engine OM 936, wheelbase 3150 mm, rear mounting brackets, air conditioning, air-suspended comfort seat, main battery disconnect switch, reversing camera, heated windscreen, EAS automatic shift, dual-circuit hydraulics, high-performance hydraulics, LS hydraulics with 4 sections, snow plow relief, digital tachograph, radio with Bluetooth, LED strobe lights, Euro 6 specification, N 05 engine PTO, front PTO, 38.5 mm trailer hitch, weight variant 13.8 tons. Further details available on request by email or phone. Location: 93095 Hagelstadt. Itjdpfeyq Ax Aox Abgjf

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog output, analog input, analog input, EA module -Manufacturer: Pamio, EA Module Ijdpswt Rwasfx Abgetf -Type: 2ENC4A -Dimensions: 180/110/H40 mm -Weight: 0.9 kg

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, AS-Interface, I/O module, digital input module -Manufacturer: Bihl+Wiedemann, AS-i 3.0 Digital Input Module IP20 41/40 -Item No.: BWU3268 Itodpfoxzdwmox Abgof -Number: 12 modules available -Price: per piece -Dimensions: 110/25/H115 mm -Weight: 0.1 kg

Condition: excellent (used), Year of construction: 2006, Geiger robot Iedpfxeuacutj Abgetf EA . 12 Year ca 2006

Condition: good (used), Year of construction: 2003, 5X PIECES handling devices Geiger Type: EA-Mini 2001 SLI Year of manufacture 2001 Itsdpfxelwqrhs Abgef

Condition: used,

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: P251001170, Complete extrusion line for ABS/PP furniture edge banding from the renowned brand AMUT The line is in perfect technical condition, regularly serviced, and currently in operation. The set includes a spare screw, further enhancing its operational value. Line equipment: 1. AMUT EA 100 extruder 2. AMUT calender station with CLV 1200 roller conveyor 3. AMUT TRK 100 edge banding machine 4. AMUT edge winder 5. Calendar cooling unit with a complete set of hoses Itsdpsxiu Npofx Abgjf 6. Electrical control cabinets for the entire line Material: ABS, PP (virgin + regrind) Working width: 700 mm (after side trimming) Nominal width: 1000 mm Thickness range: 0.5 – 2 mm Extruder: single-screw AMUT EA100 33D Extruder output: ABS: 320 kg/h PP: 350 kg/h Final product: 2 rolls, each 350 mm wide Line speed: up to 25 m/min Year of production: 2009 Technical condition: perfect, complete with spare screw

Condition: used, color: orange, tire size: 385/65R22.5, Year of construction: 2016, tire condition: 70 %, front tire size: 385/65R22.5 | 70%, rear tire size: 385/65R22.5 | 70%, maximum speed: 90 km/h, Equipment: air conditioning, compressed air brake, lighting, Tyres (front): 385/65R22.5, Tyres (rear): 385/65R22.5, Forward gears: 16, Reverse gears: 8, First registration: 01.01.2016, Automatic tow hitch._____We are offering for sale a used and well-maintained Mercedes Benz Unimog U 530, model year January 2016, with the following features: Engine OM 936 with 220 kW (299 hp), 57,500 kilometers, 2,450 operating hours, front axle differential lock, Euro 6 emission standard, 2-line trailer brake, Variopilot, air conditioning, air-suspended seat, seat heating, rear camera, preparation for mowing door and mowing seat, heated front windshield, hydrostatic drive, automatic shift EAS, 3-section hydraulic system, snowplow relief. Detailed information and equipment list available on request. Location: 93095 Hagelstadt. Ijdpfx Aoyq Av Ujbgotf

Condition: new, Water content 35 l Material 1.4301 / AISI 304 Weight 180 kg Height 1 400 mm Width 850 mm Ijdpfeb Nt Twex Abgetf Length 750 mm Electrical protection 50 A Connected load 400V 50Hz (3 phases) Electrical power 27 kW Nominal rating l/h 300 l/h

Condition: not inspected (used), functionality: unexamined, total height: 1,100 mm, total width: 400 mm, total length: 500 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 1,100 mm Weight: 30 kg Ijdpoyn A U Sofx Abgetf EQUIPMENT Matching hose package External reference: CES - Lot 157

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Itsdpfxjruakgs Abgjf Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System Iedpfsrtrvyex Abgjtf HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM Iedpfsxaqa Ssx Abgstf B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Itjdpfxexdfaze Abgsf Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Itjdpfoxdfa Usx Abgef Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Ijdpsrtrzdsfx Abgetf Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#