Used Device Tester for sale (11,348)

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Bwedpfef Axn Asx Akxjl Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Bwedpfx Ajd Dc Unjkxol Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Bsdpfx Aoytn Hkskxowl Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: good (used), Device tester, power supply Bjdpocdlt Sjfx Akxjwl -For: 15V devices -Measuring range -Measuring current: max. 300 mV -Dimensions: 250/260/H120 mm -Weight: 1.9 kg

Condition: used, Device tester, power supply -For: 15 V devices -Measuring range -Measuring current: max. A. -Dimensions: 233/225/H160 mm -Weight: 1.9 kg Bjdpjcdlt Eefx Akxjwl

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Bwjdpfx Aksxqxt Iexsl Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC Bjdoxqxw Topfx Akxowl The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: good (used), Pressure testing device, measuring device -with trailing-pointer -Max. pressure: 20 bar -High-pressure hose -Dimensions: 400/160/H200 mm Bwodpfob A Rlyex Akxol -Weight: 4 kg

Condition: ready for operation (used), Reicherter Wolpert Hardness Testing Machine / Hardness Tester Manufacturer: Reicherter Model: Briro VA II Test Loads: 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf Manufacturer: Wolpert Model: Dia Testor 2n Throat Depth: 150 mm Test Area Height: 300 mm Bwjdpfx Akox U Tlvsxsl Brinell (ISO 6506): 5 / 10 / 15.625 / 30 / 31.25 / 62.5 / 187.5 / 250 Vickers (ISO 6507): 5 / 10 / 20 / 30 / 40 / 50 / 125 Accessories: See photos for details You are welcome to come for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Requirement: a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are the property of their respective owners and are used only for identification and description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS Bodpeywcr Defx Akxswl electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Bwedpfeywcrwox Akxjl Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras Bwjdexvp S Espfx Akxsl -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) Bedpewwrxasfx Akxswl If you have further questions, we are happy to assist you by phone.

Year of construction: 2026, condition: used, NEW, Year of manufacture 2026 Automatic loading and unloading station. Suitable for wood, MDF, solid wood, plasterboard panels, cement fiber boards, panel materials. Examples: doors, boards, MDF panels, fronts, plasterboard, facade panels. Adaptations for other products possible. The machine operates at a constant speed and with set loading and unloading capacity. This allows you to easily automate your feeding and destacking processes and increase process reliability. The system is equipped with a dual-circuit vacuum system. Siemens control panel Technical specifications: - Working width: 1,300 mm - Incl. conveyor belt, length 3,400 mm Bwodpfx Akoy Iv N Roxol - Working height: 930 +/- 20 mm - PLC control, operation via touch panel, Siemens S7-1200 - Dual-circuit vacuum system - Loading and unloading of parts via vacuum suction cups - Special suction cups with position adjustment - 4 additional suction cups to lift panels 15 mm (one-sided) before vertical movement - Automatic signal after completion of loading process - Max. horizontal speed: 0.5 m/s - Horizontal stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height: approx. 1,000 mm (including pallet under panel stack) - Loading side on the left in direction of travel - Vertical lifting stroke: approx. 1,200 mm - Max. lifting weight: approx. 100 kg, continuous operation 85 kg - Max. component width: 1,300 mm - Max. component length: approx. 3,050 mm - Max. conveyor belt speed: stepless up to max. 10 m/min - Electric motor power: 1.5 kW - Electronic components: Schneider Electric and Siemens - Weight: 1,500 kg

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes welding head, hoses, and control cabinet. Bodey Ihbxspfx Akxjwl 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Year of construction: 2017, condition: like new (used), MMM Uniclean® PL II 15 single chamber washer-disinfector (Mint condition, year of manufacture: 2017) Product description (Source: MMM) Powerful single-chamber washer-disinfector for thorough reprocessing of large quantities of medical devices such as general surgical and MIS instruments, anesthesia materials, ophthalmic and dental surgical instruments, containers, bowls, trays, surgical shoes and other utensils. Operating convenience Loading baskets can be conveniently loaded from all four sides. Easy-Move casters: Even heavy baskets can be moved easily with little effort and positioned precisely in the chamber. Glass control panel - easy to clean Rubberized CoolTouch handles allow even hot baskets to be touched. Frame and front panel made of stainless steel 1.4301 (AISI 304) Chamber and all fixed piping in contact with the product in AISI 316L Glass doors in double glazing with securized glass Glass panel with integrated 5.7" color touch screen on loading side Large residual run indicator and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL ( = Electric, not external steam) Single or double door: Double door Voltage: 380 - 400 V / 50 Hz Heating: Electric Equipment Machine Deionized water preheating tank (tank 1) Deionized water recovery tank Sound insulation machine front (tank 2) Sound insulation front of machine Sound insulation side wall Exhaust air economizer Exhaust air draft breaker Conductivity measuring system Monitoring Hepa-Filter Potential free contacts Return air locks Median connection on site Hot water connection Dosing system Suction lances 3 pieces 3. dosing pump incl. accessories Roller conveyor Semi-automatic transport Basic module Automatic roller conveyor Automatic loading roller conveyor preparation Automatic unloading roller bank preparation Batch documentation and machine connection Barcode reading system UPL II (cable) Barcode reader for basket recognition Bsdpfx Akoimdtvjxewl For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: good (used), centre height 220 mm table diameter 220 mm 250mm - chuck - 3 jaws 80mm passage Bwedpfxeu Sbl Rs Akxsl Can be used vertically and horizontally Standing tip height 220mm

Condition: used, max. wheel diameter 0-200 mm max. module 25 Bwodpfstuxa Uox Akxel min. module 0,5

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Bwsdpjx A Ia Iofx Akxel

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Bwodeyc H I Sspfx Akxjl Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Bjdpexn Ax Asfx Akxowl

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: Bwjdpfsxn Awxsx Akxol • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: used, This Richebaecher electric pipe freezing unit is being offered in our online industrial auction/machinery auction as part of a warehouse clearance for a building technology company. Bodpfx Akjy Hrf Ssxjwl

Condition: used, Year of construction: 2007, Extraction connection: 200 mm Max. air flow: 4000 m³/h Filter area: 20 m² Sound pressure: 70 dB Chip volume: 400 l Space requirement: 1775 x 898 x 2005 mm Storage location: Nattheim Bwedpoy Hry Asfx Akxsl

Condition: used, Year of construction: 2018, machine/vehicle number: 180635, input voltage: 400 V, total height: 1,470 mm, total width: 480 mm, total length: 1,210 mm, power: 4 kW (5.44 HP), funnel diameter: 310 mm, For sale is a high-quality granulator from Wanner Technik, model C17.31sv. Manufactured in 2018, this is a modern, well-maintained unit that is ready for immediate use. Manufacturer: Wanner Technik GmbH Bodpfxey Hklko Akxewl Model: C17.31sv Serial number: 180 635 Year: 07/2018 Power: 4.0 kW Voltage: 400 V Frequency: 50 Hz Current: 8.4 A Transport and loading can be organised Europe-wide upon request and for an additional fee. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For more information or to get in touch, please visit our website.