Used Electric Heater for sale (29,447)

Year of construction: 2008, condition: excellent (used), Electric heating element Iodpfxjlcd Szo Abgeia Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Size:Type: EST 21 Length: 2100 mm Connected load: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, Patented electric heating solution for efficient and cozy heating. Heat output 2.8 kW (infrared 1.6 kW and halogen 1.2 kW) for approx. 10-35 sqm area at approx. 2.5 m room height Connected load 11.8 A Dimensions 54x29x80 cm Weight 15 kg Ijdpfxeqvmcps Abgjia

Condition: excellent (used), functionality: fully functional, Electric water heater Maximum power - 18kW Isdpfxjvbfvhs Abgoia

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Iedpfx Abew Uc T Ijgoia Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS - Optical Drive System Iijdpsxpfy Ssfx Abgoa Tubular direct drives on X and Y axes Linear scales on X and Y axes Intelligent AT - Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic fine hole detection function 5 controlled axes – prepared for expansion PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä16426

Condition: used, overall weight: 600 kg, Equipment: type plate available, Modular assembly and testing cell with X-Y-Z handling using the Schneider Lexium 32 axis module - Schneider handling travel distances: X = 500 mm, Y = 420 mm, Z = 175 mm - Integrated Siemens CPU 315-2DP/PN and HMI MP177/3 - Functional basic software, flexibly expandable - Operable via Sick safety light curtain C4000 eco or can be used independently as an automatic station - PLC program and circuit diagram available - LXM motion controller included for expansion functions such as path travel, etc. System dimensions: 1300 mm wide 1600 mm deep 2200 mm high System weight: approx. 600 kg If you have any questions, please feel free to contact us. We will get in touch with you. Iiedpjy A Ri Iofx Abgja

Condition: used, Year of construction: 2003, This hot vulcanizing press, model: type CBP-400-2000-1500, is being auctioned online in our industrial/machinery auction due to the closure of the ContiTech Transportsysteme site. Ijdpfx Absyz R T Regjia

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Iiodpfsuhmacox Abgea Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: good (used), Position computer, computer, control unit, robot controller, controller, CNC controller, operator panel, computer monitor, screen, TFT industrial monitor, front panel, touch screen, control unit, display, operator panel, touch screen, touch panel, multi-panel, touch multi-panel Iiedpfx Aoxud Dmebgea -Manufacturer: Schneider Electric, Pro-face Monitor -Type: GP-4301TW -Model: PFXGP4301TADW -Number: 2 monitors available -Price: per piece -Dimensions: 170/140/H60 mm -Weight: 0.7 kg/pc.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U1060515116, Equipment: type plate available, Lincoln Electric Precision TIG 375 – TIG welding unit with water cooling (TEC ARC TC2000) Ijdpfx Abey A Sgnegeia For sale is a high-performance TIG welding unit, model Lincoln Electric Precision TIG 375, ideal for demanding welding applications in industrial environments. Technical highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency ignition (HF) - Pulse function and extensive adjustment options - Foot pedal connection available Equipment: - Integrated TEC ARC TC2000 water cooling - Hose package / torch included - Robust chassis with casters - User-friendly control panel with precise regulation Condition: - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Special features: - Highly reliable industrial equipment from Lincoln Electric - Perfectly suited for workshops, metal construction, and production - High duty cycle for continuous operation Scope of delivery: - Welding machine - Cooling unit (water cooling) - Torch / hose package - Power cable If you are interested or have any questions, feel free to contact us. Viewing and test run possible by appointment.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V01D5/P02D2R1 Iisdpfx Absyxmlwsgea -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P2.2kW 0.1-320Hz -Number: 2x inverters available -Price: per piece -Dimensions: 140/70/H155 mm -Weight: 0.9 kg/pc.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V02D2/P04D0R1 Iisdpsyxmkyjfx Abgja -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P4.0kW 0.1-320Hz -Number: 1x inverter available -Dimensions: 140/70/H155 mm -Weight: 0.9 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Contact our team for details and price. Iiodeyznu Sopfx Abgea

Condition: ready for operation (used), Servo-driven tapping and threading machine, Used machine Iiodpfx Ajxdfauebgea Manufacturer: Electric Servo Model: M12H Dimensions: Width: 700 mm Depth: 150 mm Height: 520 mm Radius: 1100 mm Comes with Tap Torsion GT 12-0316 chuck set: 3.5 × 2.7 M3 4.5 × 3.4 M4 8 × 6.2 M8 M6-8 Torsion u-6.3 M5 Torsion u-5 M10 Torsion u-8 M12 Torsion u-9

Condition: ready for operation (used), Year of construction: 2018, operating hours: 62,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Iisdpfx Ajwptfrebgsa Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: good (used), PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control Modicon -Output module: Type: Modicon TM3DQ16T 1 pc. -Input module: Modicon TM3AI8 3 pcs. -Trigger module: Modicon TMAQ4 2 pcs. -Shipping/Price: complete -Dimensions total: 150/90/H90 mm -Weight: 0.7 kg Iiodpfx Abexn Nm Hogea

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Barberan laminating machine for door frames Iijdjy Aibcopfx Abgoa

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) Isdpjyua Amjfx Abgsia The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: MITSUBISHI, controller model: CR750-04VD1-1-S15, number of axes: 6, This 6s Mitsubishi Electric RV-4FLM robot arm was manufactured in 2018. It features a reach of approximately 649 mm and a payload capacity of up to 4 kg, making it suitable for various industrial automation applications. Consider the opportunity to buy this Mitsubishi Electric RV-4FLM robot arm. Contact us for further details. • Quantity: 2 similar robots available • Reach: approx. 649 mm Iiodpfxeyhddno Abgea • Payload: up to 4 kg (nominal 3 kg) • Repeatability: ±0.02 mm • Protection class: IP67 • Controller: CR750 • Teach pendant: R32TB (handheld device) • Connection: Robot-to-controller cable included • Suitable for applications in industrial automation

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Additional equipment • Wire diameter: 0.1 – 0.3 mm Machine Benefits Technical Machine Benefits • Table dimensions: 840 x 640 mm • Max. Taper angle: 15/260 • Power supply: 3pe 50/60 hz ac200/220v (35 a) • Air source: 0. 5 mpa (75 l/min) • Pc technology with 15" lcd color screen, touch screen, and mouse Iijdpfx Ajx D Iv Sobgea • Electronic manual control panel • Machining support with 2d/3d cam and graphics verification Extra Information Machine still under power

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via linear axis Schneider Electric PAS43SBG1800 Travel distance 1800 mm Travel distance per revolution 20 mm Maximum speed 1 m/s Drive element Ball screw drive Guide type Recirculating ball bearing guide size 20 Payload 60 kg Maximum speed ball screw 3000 rpm Iijdpfsgf Ix Aex Abgea Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Current consumption max. 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Gripper opening 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Very good condition Almost identical linear unit under stock number 59702

Condition: ready for operation (used), Year of construction: 2010, operating hours: 500 h, functionality: fully functional, Used Lincoln Ideal Arc DC 1000 submerged arc welding machine in good condition, equipped with LT 7 tractor, 25 m connecting cable, and comes with warranty – for sale! Iisdpfx Aoyy Dkmebgoa

Year of construction: 2010, operating hours: 500 h, condition: ready for operation (used), functionality: fully functional, welding current (max.): 1,300 A, Used Lincoln Ideal Arc DC 1000 submerged arc welding machine in good condition, equipped with LT 7 tractor, 25 m connecting cable, and comes with warranty – for sale! Ijdpjyy Dkgsfx Abgoia

Condition: good (used), Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer -Voltage: 24 V -Quantity: 29x available -Price: per piece Iiedpfxjdwdrge Abgsa -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.

Condition: like new (used), Year of construction: 2025, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 01/2025, Large-format laminator for laminating materials from roll. The machine is adapted for coating PVC tarpaulins. New machine from 2025, used 3 times for testing purposes only. Machine dimensions: 4200x1200x1400 (LxWxH). Weight: approx. 600 kg. Production capacity: 30 linear meters/hour. Lacquer application: forced via 24V peristaltic pump up to 20L/h. Capable of coating products up to 3.2 m wide. Iijdpeyxfqljfx Abgja Machine equipped with a strip of IR emitters (12 pcs) for lacquer drying, a blower strip for product cooling, and thermocouples for temperature measurement. Tension regulation of the material is managed by pneumatic reducers. Media: power supply 3-phase/64A/5-pin plug, installed power up to 10kW, compressed air up to 4 bar. Machine under warranty, CE Machinery Directive compliant. User manual available. Machine is connected to utilities and can be tested on-site.