Used Fasti 505-10-2 for sale (90,108)

Condition: excellent (used), Fasti hand guillotine shears type 505 - 10 - 2 1060 x 2.0 mm Itodjwgylaopfx Abgof

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Itodpfxewb Efze Abgof Max. round diameter: 1000 mm Motor drive via footswitch Good condition

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be preselected via scale Manual and automatic bending mode possible Itsdoq T Ud Sjpfx Abgjf Weight: approx. 650 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Motorized upper beam adjustment via foot switch Itjdpfof Nwmzox Abgsf

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Itodpfx Abjwlp Tqogof Weight: about 500 kg

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Iodpsu Rimmsfx Abgstf Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: used, Max. bending length: 1020 mm Itsdpfx Absyyl Nksgsf Max. sheet thickness: 3.5 mm steel Polished bending rail Weight: approx. 1000 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Itodeyyl Nqepfx Abgof Polished bending rail Weight: approx. 1000 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 1.5 mm steel Itedpfx Aoyrrg Sebgef Weight: approx. 300 kg

Condition: used, Year of construction: 2009, machine/vehicle number: 09102020, Lg. No. 25420 Manually operated 3-roll plate bending machine with asymmetric roll arrangement Technical data: Itjdpfsx Exr Aox Abgsf - Max. working width: 1020 mm - Max. material thickness: 1.5 mm - Roll diameter: 64 mm - Top roll crowned, swing-out forward - Rear roll adjustable at an angle via handwheel for conical bending - Lower roll adjustment with lever and eccentric - Front roll parallel - Required space: approx. W 1250 x H 950 x D 750 mm - Weight: approx. 200 kg

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Top roller diameter: 200 mm Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Motorized rear roller delivery Itodoxwyfrspfx Abgjf Lower roller adjustment via handwheel with position indicator Weight: approx. 4,500 kg

Condition: used, Max. bending length: 1500 mm Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Itsdpfx Absudqd Rsgof Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via limit switch Manual backgauge Weight: approx. 1000 kg

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. Itjdjum Ttzjpfx Abgsf A demonstration under power is possible at any time in our exhibition hall.

Condition: new, Year of construction: 2020, Model KPZ-2 Type Closed Working dimensions 900 w. x 1300 h. x 900 d. External dimensions 980 w. x 2100 h. x 1600 d. Operation Electric Power 0,69 kW x 2 Voltage 380 V Frequency 50-60 Hz Itodpfx Abob Al Sbegof Filter Polyester Number of filters 3 Filter surface 22,5 m² Fan aluminium Fan 74 dBa Air consumption 10,200m ³/h Warranty 12 months Other models KPZ-4 / 6 / 8 / ... on request

Condition: like new (used), Max. Biegelänge: 1020 mm Itsdpfx Aod Hx Icobgef Max. Blechstärke: 1,2 mm Stahl

Condition: good (used), Year of construction: 1995, Calender with 3 rollers Fasti main features: Length 1860 Sheet metal thickness max. mm. 0,75 Upper roller diameter mm. 40 Itjdpfx Asf Slq Sebgsf Several LED ceiling light templates

Condition: used, Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual rear stop up to 500 mm Side stops and table extensions Iodpfx Aoukhnnjbgjtf knife sharpened 1900 kg

Condition: used, Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stops and table extensions Itsdpfx Absyrnvisgof knife sharpened 1700 kg

Condition: used, Year of construction: 1993, Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Itodpfxeyhqhte Abgof Bent rail and machine in top condition Weight: approx. 3000 kg

Condition: new, empty load weight: 1,209 kg, maximum load weight: 2,291 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,990 mm, loading space width: 2,140 mm, loading space height: 2,100 mm, loading space volume: 22.1 m³, color: white, construction height: 2,770 mm, working width: 2,240 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3,500 kg - Unladen weight: 1,209 kg - Payload: 2.291 kg - Interior dimensions: 499 x 214 x 210 cm (L x W x H) - Overall exterior dimensions: 663 x 224 x 277 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C steel rim - Brakes: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h: INCLUDED! Standard equipment: - Wooden walls 25mm coated with plastic and sandwich inlay - Wooden floor and side walls Finnish quality - Very stable welded steel frame - Frame completely hot-dip galvanized - Many stable cross beams thus high point load - Continuous side members - Frame due to its stable construction - 12 lashing brackets recessed inside the side edge TÜV certified to 1000daN / kg - Interior light - 2 flg. Rear door lockable with VA espagnolette lock - 2 maneuvering handles at the front - automatic reverse drive - Knott overrun device and parking brake - very stable bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Special equipment included in the price: - Low chassis with 195/50R13C tires - Parabolic suspension incl. shock absorbers for 100 km/h fitted instead of rubber-sprung axles. - Parabolic suspension axle with shock absorber for absolute driving comfort! Optional accessories available: - Rear supports fitted, the pair - 100km/ approval with wheel shock absorbers - Lashing rails, anchor rails, additional load securing, locking beams, tension belts, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Itedpfx Asu Htnyjbgef

Condition: used, Year of construction: 2008, machine/vehicle number: MBxx-25, DEMAG KBK 2 - crane sky crane runway indoor crane Please ask your crane runway about your dimensions. Payload / lifting capacity from 80 125 250 500 to 1000 Kg Technical data of the system: Profile Demag KBK 1, 2L, 2 rails Also available as a monorail with curved sections, turntables and points! Mounting height variable The system can be delivered complete, including accessories such as: Itedpowq A Avefx Abgef KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. All sizes of chain hoists are optionally available Various facilities available. Very good used condition Rails available in yellow or red! Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm Itjdpfsxrgv Tox Abgof plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Ijdoct Dhaspfx Abgjtf Also available as monorail with elbows and points! Mounting height variable System can be supplied complete KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Very good used condition Rails available in yellow or red! Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich info ÄT mobatgg . de

Condition: good (used), Technical Specifications: Working length: 6040 mm Bending capacity (steel): 2.0 mm NC control Bending angle adjustment: 0 – 180° Upper beam opening: 500 mm Dimensions (L x W x H): approx. 8300 x 1350 x 2000 mm Weight: approx. 11 t Accessories: various segmented tools Itodsyiaucopfx Abgsf rear outfeed table The seller assumes no liability for typing or data transmission errors. The machine is in a condition commensurate with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: ready for operation (used), Heidenhain HR 150-5000 handwheel encoder ID: 257 061-10 SN: 8126947 - Cable length: 2.5m, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itodpfx Abjx Ht D Aegef