Used Fieldbus for sale (63)

Condition: used, Fieldbus gateway, Canopen Fieldbus gateway: for EnDat encoders -Output signal: CANopen, DeviceNet or PROFIBUS DP protocol -to connect: from encoder to fieldbus -Signal converter: for encoders of the 600 series with EnDat interface -Protection class: IP 65 -Dimensions: 90/145/H30 mm Bededkqhfopfx Akxodb -Weight: 0.38 kg

Condition: good (used), Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module, Connection Device Fieldbus -Manufacturer: Sick, fieldbus module for Profibus -Type: CDF600.0100 -Article number: 1041251 -Number: 44x modules available -Dimensions: 225/75/H50 mm Bdsdot Trxcspfx Akxjb -Weight: 0.6 kg/piece

Condition: excellent (used), Year of construction: 2020, Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module, connection device fieldbus, fieldbus control, interface module -Manufacturer: SEW-Eurodrive, Fieldbus control interface module Bdsdpfxoxu Ul Uo Akxsb -Type: ECC-DFC-24-00 -Number: 18 modules available -Dimensions: 200/55/H30 mm -Weight: 0.2 kg/pc.

Condition: used, Fieldbus, Profibus, PLC control, automation technology, controls and regulators -Fieldbus coupler type: 750-333 Bsdpfxsd Hacae Akxsdb -Bus terminals: 19 (14x750-403/4x 750-504/1x750-600) -Dimensions: 280/100/H65 mm -Weight: 1 kg

Condition: used, Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, The FANUC M-10iA is a compact and versatile 6-axis industrial robot, ideally suited for high-speed handling, assembly, and machine loading applications. Paired with the proven R-30iA controller, this system delivers a reliable and high-performance automation solution for a wide range of production environments. With a payload capacity of up to 10 kg and a reach of 1,420 mm, the standard M-10iA covers a broad spectrum of applications. Its slim design and low weight allow for flexible integration—even in confined spaces. The high axis speed enables short cycle times, significantly boosting productivity. The repeatability is ±0.08 mm, ensuring precise and reproducible results, even in demanding applications. The R-30iA controller stands out with its rugged industrial design, high process reliability, and extensive expansion options. It supports numerous fieldbus and communication interfaces, allowing for seamless integration into existing production systems. Technical highlights: - Payload: 10 kg - Reach: 1,420 mm - 6 axes - Repeatability: ±0.08 mm - Compact design - R-30iA controller with comprehensive integration capabilities The FANUC M-10iA is the ideal solution for companies seeking a flexible, fast, and reliable automation system. Especially suited for handling, assembly, packaging, machine loading and unloading, and general production tasks. If interested, we are happy to provide further technical details or prepare a customized quotation. Bodpfxoy H Ekue Akxodb

Condition: like new (used), Year of construction: 2022, operating hours: 4 h, functionality: fully functional, type of input current: three-phase, total height: 960 mm, total width: 560 mm, total length: 1,040 mm, overall weight: 130 kg, warranty duration: 6 months, electrical fuse: 400 A, Equipment: documentation/manual, The equipment has been checked by an authorized service center and is ready for operation. Condition: Almost NEW (used 4h) Warranty of 6 months Model: EWM Titan XQ R 400 AC puls Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A (eta) 100% Power supply: 3~ 400 V, 50/60 Hz Processes: MIG/MAG standard, pulse, double pulse, forceArc, rootArc, AC Arc TBI BRG-2-ES-DEA attachment for automatic cutting and nozzle cleaning. Wire diameters: Steel: 0.8 – 1.6 mm Aluminium: 1.0 – 1.6 mm Cooling: Water-cooled (integrated cooling unit) Efficiency: >90% Dimensions (L×W×H): approx. 960 × 560 × 1040 mm Weight: approx. 130 kg Robot Interface Equipped with robotic interface (digital/analog I/O and Fieldbus options). Bjdexdncxjpfx Akxedb Compatible with major robot brands: ABB, KUKA, Fanuc, Yaskawa, Panasonic, Kawasaki, OTC. Full integration possible – process parameters controllable directly via robot controller. German quality – designed for continuous industrial use. AC/DC pulse technology for aluminium and non-ferrous metals. Large database of synergic programs for easy setup. High energy efficiency, reduced operating costs. Ready for manual welding or complete robotic integration. Mobile trolley with 4 wheels for easy handling.

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Bsdpfxjfg E Hye Akxedb Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: good (used), Year of construction: 2016, functionality: fully functional, Handling and conveyor technology for transporting sandwich panels between the rack and the CNC machining center (BAZ) Panel size: max. 2,500 mm x 8,000 mm x 30 mm Max weight: 150 kg Conveying direction: Lengthwise on roller conveyors Crosswise on toothed belt conveyors Bdsdpfx Akjy A Rggjxsb Machine scope: - Tilting station with transfer height of 680 mm - Belt conveyor with 40 mm lift for removal from the tilting station forks - Belt conveyor with 265 mm lift for transfer to the roller conveyor - Roller conveyor and belt conveyor with -40 mm lift for receiving the sandwich panels; roller conveyor height: 920 mm Electrical data: Operating voltage U=400V +N +PE -50Hz Control voltage U=24V DC Brake voltage U=230V AC Drive technology: Manufacturer: SEW Protection class: IP54 Quick-connect plugs and hybrid cables on SEW fieldbus modules Sensors: Manufacturer: Leuze Metalwork

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: H18/X2090/202/00162, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Arm reach: 1,000 mm Repeatability: 0.03 mm Maximum rotation angle: 350° Maximum rotational speed: 16.8°/s Maximum linear speed: 0.6 m/s Platform positioning accuracy: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (without robot arm, W x D x H): 890 x 1,120 x 1,000 mm Total weight: 730 kg Power supply: 1 x 230 V / 16 A Battery capacity: 5.8 – 8.7 kWh Number of laser scanners: 3 Bjdpfxsyzyxcj Akxodb Scan plane height: 150 mm Compressed air tank: 0.75 l / 7 bar Wrist protection rating: IP67 Arm protection rating: IP65 System protection rating: IP20 Average floor surface pressure max.: 10 N/mm² Drive type: Differential drive EQUIPMENT Tool parking station: 4 tools per station Tool changing system: MPS032 Navigation: based on laser scanner data Interfaces: WLAN, LAN, fieldbus Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm contacts Optical and acoustic signals: 4 LED units, storage for up to 16 audio files

Condition: ready for operation (used), Year of construction: 2025, Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details. • Condition: New • Application: Classic cutting of rectangular workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil, or veneer • Workpiece/panel capacity: • Length: from 140 mm • Width (finished size): min 50+50 mm; max 450+450 mm (asymmetrical cutting possible) • Thickness: 8–40 mm • Max workpiece weight: approx. 30 kg • Shape: rectangular • Working height: 900 mm • Machine side: Right-hand machine (stop side on the right in the direction of travel) • Feed/adjustments: • Feed speed: 5–40 m/min, servo-controlled • Electronic height adjustment: 5–45 mm via Beckhoff servo axis • Right-side Teflon stop ruler, servo-driven • Left infeed ruler with pneumatically spring-loaded unit, servo-driven • Construction/transport: • Sturdy welded steel frame • Transport by belt with height-adjustable top pressure • Low-maintenance belt with gentle transport coating • 32 mm V-belt top pressure with spring-loaded rollers for reliable guidance • Aggregates: • Aggregate 1: Frequency-controlled scoring saw • Perske motor 4.4 kW, 50 Hz, 400 V, 4500 rpm • Tool holder D=35, key • External + internal thread R/L, servo-controlled, tandem, non-swiveling • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Max saw blade Ø 350 mm • Flow-optimized extraction hoods • Without tools • Aggregate 2: Frequency-controlled main saw • Perske motor 6 kW, 50 Hz, 400 V, 5000 rpm, counter-rotation • Tool holder D=35, spline shaft, external + internal thread R/L • Max saw blade Ø 400 mm • Split wedge adjustable by hand • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Flow-optimized extraction hoods • Without tools • Control and HMI (Beckhoff): • PC-based control with integrated PLC and electronic line control (TwinCAT 3) • 15.6" multitouch panel with integrated keypad/keyboard/mouse • Simple, component-oriented program creation; freely definable program names; virtually unlimited program memory • Operation via keyboard/mouse/touch; message system for operator/error messages • MDE Basic: production time, setup time, downtime, fault time, unit counter, adjustable recording period • Fast EtherCAT fieldbus; Ethernet RJ45; USB port • Uninterruptible power supply (UPS) for panel PC • PLC programming per IEC 61131-3 • Feed lock for adjacent machines/transport systems • Included with basic machine: • Sound absorber/protective hood with safety lock • Connection pieces for external extraction (min air velocity 28 m/s, negative pressure 2480 Pa) • Compressed air connection with maintenance unit • Integrated control cabinet with cooling unit (ambient 10–45 °C) Bedpoyuggxjfx Akxsdb • Safety and protective measures per CE; CE mark • Utilities and specs: • Operating pressure: 6 bar • Power: 3/N/PE, 400/230 V, 50 Hz, ±5% (ECD protective circuit not applicable) • Language: • Machine labeling: German • Operating instructions: German • Spare parts lists: German • Paint finish: • Base/cladding: Gray-white RAL 9002 • Aggregates: Dust gray RAL 7037

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. Bjdpfeyv Nylex Akxodb - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Bdodeyug R Ropfx Akxsb Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs Bodoyug Hxepfx Akxodb • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Year of construction: 2008, operating hours: 34,590 h, machine/vehicle number: R81, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Bodpsx H Thuofx Akxedb Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart. Operational Performance & Versatility Product scope: UHT milk, juice, and shelf-stable beverages

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: AU170124-01, APPLICATION AREA UP TO NOW: Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm Bsdpfx Asytphiskxedb up to L/W/H 8000mm x 2500mm x 80mm EQUIPMENT: Traveling gantry with synchronized drive Vacuum lifter beam with automatically switchable suction rows, adjustable based on the respective workpiece length Schmalz vacuum generator with area suction grippers Clamp cartridges next to the suction cups ensure vacuum activation Z-lift of the suction spider via scissor guides Z-axis asynchronous motor, MoviDrive frequency converter, belt drive Interfaces for upstream and downstream stations Control system: Siemens S7-300 CONTROL CABINET: Power supply, power, and control section with main switch, power supply unit, motor protection switches, automatic circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of a CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet interface, all necessary digital input and output modules, and terminals, fully wired. Fieldbus system: Profinet-Safe.

Condition: excellent (used), Stäubli Type: TX90XL Robot / CS8C Controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including CS8C controller and original teach pendant. The TX90XL is suitable for pick & place, assembly, machine tending, parts handling, as well as automation, testing, and training applications. The XL version offers an extended reach for flexible deployment. Programming via VAL3. Bedpfxsycvyde Akxsdb Technical Data – Robot: Type: TX90XL Axes: 6 Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Technical Data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see image) • Stäubli TX90XL robot arm • CS8C controller • Original teach pendant • Connection cables (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Stäubli Type: TX90L Robot / CS8C Controller Six-axis robot with control unit For sale is a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing, and training applications. Programming via VAL3. Technical Data – Robot Model: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg short-term Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical Data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Condition: used Scope of delivery: (see photo) - Stäubli TX90L robot arm - CS8C controller Bdjdpeycvxtjfx Akxjb - Original teach pendant - Connection cables (Subject to changes and errors in the technical specifications and information!) If you have further questions, we are happy to answer them by phone.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 18,698 h, machine/vehicle number: 6620-100358, ABB used / tested IRB6620-150/2.2 880Kg with IRC5 M2004 control 150Kg Load capacity: 150Kg Reach: 2200mm Connection cable: 3HAC041639-001 ; 3HAC2493-1 Year of construction: 2013-12-20 Operating hours: 18698 RobotWare-Version: RW5.15_02.00.2005. Options: -644-2 German Bdsdjq Dlhgjpfx Akxjb -748-1 Devicenet Lean -840-3 Profinet Fieldbus Adapter -608-1 World Zones -611-1 Path Recovery

Condition: good (used), Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, IO-Link input module -Manufacturer: ifm, IO-Link input module -Type: AL2400 -Number: 16 modules available -Price: per piece Bdjdpfoxu Uwwjx Akxsb -Dimensions: 130/60/H30 mm -Weight: 0.3 kg/pc.

Condition: used, Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, Profibus-DP Bdodpfjnbhlmox Akxob -Manufacturer: ifm electronic, Profibus-DP type AC 1306 -Controller: AS-i ControllerE 2MSTR 1RS232C 1DP -Number: 1x module available -Price per piece -Dimension: 105/85/H130 mm -Weight: 0.6 kg/pc.

Condition: used, Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: Festo, input module -Type: CP-E16-M12X2 -Item no.: 18206 Bdsdoq Awamopfx Akxjb -Quantity: 1x modules available -Dimension: 145/80/H55 mm -Weight: 0.5 kg

Condition: good (used), Profibus single module, for PLC control, fieldbus, PROFIBUS -Quantity: 10 available -Price: per piece Bdedpfx Aksb S Htroxeb -Weight: 0.2 kg/piece

Condition: good (used), Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, Profibus-DP -Manufacturer: ifm electronic, Profibus-DP type AC 1305 Bodpfxsnbhk Ne Akxsdb -Controller: AS-i ControllerE 1MSTR 1RS232C 1DP -Number: 2x module available -Price per piece -Dimension: 105/85/H130 mm -Weight: 0.6 kg/pc.

Condition: good (used), Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module Bdodpfx Aoxu Uvmokxjb -Manufacturer: ifm, Input module -Type: AL2401 -Number: 27 modules available -Price: per piece -Dimensions: 165/60/H30 mm -Weight: 0.4 kg/pc.

Condition: used, Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, input module -Festo type: CP-A08-M12 18207 LN07 -Connection: 24V DC -Dimensions: 173/75/H60 mm -Weight: 0.5 kg Bdodpfx Asfdd A Hjkxjb