Used Henning Rw 4-1000 for sale (63,551)

Condition: good (used), Year of construction: 1980, machine/vehicle number: 20007, Offer 23326 Technical specifications: Ncodpjyfgc Iofx Akqer - Broaching tool width up to 10 mm - Broaching tool length up to 1000 mm - Pulling force: 1.5 t - Working speed: 4 m/min - Working / operating height: 1000 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 1500 x H 1000 x D 400 mm - Weight: approx. 200 kg

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift Nodpfxjywdp Rs Akqjcr This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Nedpfx Akeup Uzfsqecr Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: good (used), Brand: HM Model: WKS 1000/4.0 Cutting length: 1000 mm Cutting capacity (steel): 4 mm Cutting capacity (stainless steel): 2 mm Back gauge: 750 mm CNC controlled Ncjdpfx Aew Hydvjkqjr Hold-downs: 1 piece Table height: 780 mm

Condition: used, Year of construction: 2006, Format: 1250 x 800 mm Equipment: Automatic lifting cycle controlled by a photocell or manual mode, fast operation. lifting height approx. 840 mm, machine height approx. 2000 mm Lifting Capacity: 1000 kg 380V power supply Nsdsy Agg Nopfx Akqscr

Condition: excellent (used), mileage: 133,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster - Remote-controlled central locking - Refrigerator - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Toolbox Ncodsyvtkbjpfx Akqer - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Front axle 1: steered Front axle 2: steered Rear axle 1: steered Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...

Condition: used, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, battery voltage: 48 V, fork length: 1,000 mm, Empty weight: 2.848 kg Lifting capacity: 1.000 kg Maximum passing height: 210 cm Supply voltage: 380 V CE mark: yes Ncodpfeyu T Naex Akqer General condition: average Technical condition: average Visual appearance: average Please contact Bas Sindorf for more information

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, Counterweight in large protective housing Nodpfxsynhudj Akqecr

Condition: good (used), Insulated material silos for Lanco dryer 4 units Partially with additional heating Price: 300 EUR per unit Nedpfx Akjv A Rh Sjqscr Price for 4 units: 1,000 EUR!!!

Condition: used, Year of construction: 2001, machine/vehicle number: 150204, Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Ncsdpevmfznjfx Akqsr Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton Standard configuration electrical overload protectionSIEMENS Control S72-hand control panel Extended machine accessories Automation Schleicher leveller (650 mm, max. 2.0 mm)Wanzke decoiler (max. 6t)Helmerding feeder (600 mm, 0,6 - 6,0 mm)

Condition: good (used), - Made of AISI 304 stainless steel - Galvanized steel frame Equipment: - Tap - Ball valve for clear drain - Drain for residual water - Dome NW 400 Dimensions: - Length: 1250 mm - Width: 830 mm - Height: 1670 mm Ncedjwff Ecjpfx Akqjr

Condition: refurbished (used), Fan RW No. 4 Ncedpfx Aswu A Sxekqsr Volume m³/h 10,000 Drive kW 15 / V400 / Hz50 Pressure Pa 3000 Inlet diameter 400 mm Outlet diameter 400 mm Open impeller Direct drive

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Njdsw H Dgnspfx Akqecr Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Brush sanding and finishing machine / Universal brushing machine Manufacturer: Leif Lorentz / Universal Finishing Systems Model: B 4 1000 Universally applicable as a finishing unit, for dust removal and workpiece cleaning, or for sanding Year of manufacture: 2005 Ncjdpfx Aoxrlgqokqer Working width: 800 mm Belt width: approx. 850 mm Pass-through height: approx. 60 mm 2 brush units from above, each 1.1 kW, infinitely variable speed, 350–900 rpm Brush configuration as currently installed. Machine dimensions approx. 2400 x 1300 x 1700 mm

Condition: new, Year of construction: 2026, CNC centers have been designed based on proven components that guarantee reliability for a long time of use. The massive machine body ensures efficient and precise machining. Hermetic chamber ensures safety and cleanliness at the workplace. The table with a hardened surface can accept workpieces without loading the mechanical elements of the structure. Each machine in this series is equipped with an efficient cooling system to ensure optimal cutting conditions. Description Linear guides Top quality guides for all axes Massive machine body Good accessibility of the work table Hermetic working chamber ensuring work safety CNC control (SIEMENS SINUMERIK 808D) Technical parameters Spindle taper BT40 Table dimensions 1000 x 500 mm The distance between the spindle and the table surface 620 mm The distance between the spindle and the column 530 mm Table travel 800 x 500 mm Z axis movement range 500 mm Spindle speed range up to 10 000 rpm Number / width / spacing of T-slots 4 / 18 mm / 120 mm Working feed 2000 mm/min Ncjdpfx Asrh Ewkokqer Rapid feed X,Y,Z 15 m/min Number of tools in the magazine 24 Power (torque) of feed drives 1,75 / 1,75 / 3,5 kW Spindle motor power 5,5 kW Power supply, total power 400V / 18 kW Max. table load 500 kg Weight 5000 kg Dimensions (L x W x H) 2800 x 2300 x 2700 mm

Year of construction: 1995, condition: used, machine/vehicle number: 20225, Color: green Nsdpfx Akebrcmfoqecr Slighty used! DIN 1415 Impetus electromechanic

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR Wire Rope Hoist Crane 5 units available, see details below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m!! - 2-fall, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m!! - 2-fall, year 2015 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m!! - 2-fall, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m!! - 2-fall, year 2012 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m!! - 2-fall, year 2012 With 2 lifting speeds, lifting height 12m, adjustable gauge (track width) of the hoist Ncsdjy D D S Sspfx Akqjr Each hoist supplied with pendant control and connection plug for power supply Total weight approx. 300 kg, connection to 400V 50Hz Very good condition, see pictures Item location: 75053 Gondelsheim Shipping possible, please inquire with your postal code

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Made in Italy. This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1200×800 mm Stack height: 2000 mm Load capacity: 1200 kg Device weight: 1300 kg Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space. Includes a ramp. Ncsdpfxeyur Ius Akqjr

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm Nsdpfoyga T Nsx Akqscr • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: used, Year of construction: 1982, pulling force - max. 3 t max. ram stroke 1000 mm max. workpiece diameter 200 mm table-size 500 x 220 mm working area 500 x 220 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 50 mm total power requirement 6 kW Ncedeyif Nxepfx Akqsr weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm Ncedsi Ewqyepfx Akqer 08x safety pins, new finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 01x Chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 1.000 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A (with gas train) - Output: 100–1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100–1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/3-A (with gas train) - Output: 125–900 kW - Design: ZM-LN - Year of manufacture: 2011 4. WEISHAUPT WM-G10/3-A (with gas train) Ncodpowgyrtsfx Akqjr - Output: 100–1000 kW - Design: ZM - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100–1000 kW - Design: ZM - Year of manufacture: 2009

Condition: new, Year of construction: 2026, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, nuts, etc. see PDF. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm. Ncjdpfx Asbbr Iiekqjr

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Njdpobbr Ipofx Akqscr Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Ncodpfx Akochb Sbjqsr 450mm, 600mm, 900mm.