Used Jeumont Industrie Generator for sale (33,919)

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 98 V • Excitation current: 454 A • Excitation with rotating diodes (brushless) Bsdpfxey D Hrzo Akxsdb • Water cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system!

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 • Apparent power: 60 MVA • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Bedpoy D Hp Tefx Akxedb Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Condition: used, Used Oxymat O500 PSA industrial oxygen generator made in 2012 and with capacity 40.6 m3/hour. Containerised system that includes the following equipment: - Almig 45 belt air compressor, cyclone separators, air receiver, Donaldson DCO 360 AB dryer, Donaldson ultrafilter, Oxymat 2-column O500 system, oxygen receiver, Oxymat control panel, Rix compressor, low oxygen gas detection system. - Not suitable for medical oxygen. Bodpjyt Rc Iefx Akxjdb

Year of construction: 1993, operating hours: 100 h, condition: used, functionality: fully functional, machine/vehicle number: 442714, Three-phase industrial generator sets with self-regulating alternator compliant with CEI 2-3 / IEC standards. Rated power 1100 kVA (880 kW) at 1500 rpm – 50 Hz operation. Units are installed on a steel base with containment system, independent control panel, and exhaust lines. Main specifications: Alternator Tessari EC 43 LA/4 Bodpfoytc Dwsx Akxodb Power: 1100 kVA Active power: 880 kW Rated current: up to 5000 A (depending on voltage configuration) Voltage: 127/220/254/440 V Cosφ: 0.8 Insulation class: H Year: 1993 The generator sets can be used for: Prime power generation Backup power supply Power supply for large industrial facilities

Condition: excellent (used), Year of construction: 2022, operating hours: 95 h, functionality: fully functional, For sale: Complete industrial microwave generator system from MUEGGE GmbH (Germany), 30 kW at 915 MHz, in excellent condition with very low operating hours. This package includes the full WR975 high-power waveguide assembly, making it ideal for industrial heating, drying, food processing, chemical applications, and R&D environments. Technical Specifications Microwave Power Supply: • Output power: 30 kW • Frequency: 915 MHz • Input: 3 × 400 VAC, 50 Hz • Control interface: CAN • Colour: RAL7035 • Included: 10 m CAN cable Magnetron Head: • Power rating: 30 kW / 915 MHz • Waveguide interface: WR975 Included Waveguide Components: • 100 kW circulator, WR975 • WR975 waterload • Detector diode (for forward/reflected power monitoring) • 20 dB attenuator, Type R 412 720 Documentation: • Complete English instruction manual and technical documentation provided on USB stick. Condition: • Excellent – barely used • Fully functional and tested • Located in France • Ready for immediate dispatch Applications: • Industrial microwave heating • Drying and dehydration processes • Pasteurisation and food treatment • Chemical and materials processing • Research and development Bsdpfxox Ex Drs Akxsdb Original New Price: • €109,000 (manufacturer reference) Asking Price: • Negotiable, subject to shipping and inspection

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, In January 2025, a new spindle was installed! The machine has been regularly maintained! TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 800 mm Feed rates Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous duty) Vertical: 10,000 rpm Spindle speed S1 (continuous duty) Universal swivel head, 2 axes: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Bdsdpfx Aoy Dgyfokxob Current draw: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT DINO series Precision linear guides and ball screws Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Includes documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Interchangeable milling head with 4th/5th axis

Condition: good (used), 2 weighbridges: Philips Industrie 18 m / 3 m, P.Millier Lyon 13 m / 3 m. Price: €2,000 each. Bdsdpfx Aey Av Hljkxeb

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Bdjdpfjxfrv Eox Akxob Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, Used DC motor Anchor 460V // Current 325A field 340V // current 4,7 A Bdodpfx Aowbhg Uskxeb Speed 1880rpm Power 138kW

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 300 kg, construction height: 1,950 mm, Technical condition: very good Bedoymt Hcopfx Akxodb

Condition: used, Year of construction: 2017, operating hours: 1 h, Mast type: None Bdsdpfsymt E Sjx Akxob

Condition: used, Year of construction: 2012, Automatic loading table Milling unit with 10 spindles, also inclined Swing machine FOM Spring 50 blade 500 mm horizontal Automatic unloading table Bdedpfx Akey Egzxexob

Year of construction: 2023, condition: like new (used), 4-axis machining center Usefull lenght: 3200 mm Max section profile: 160x 210 mm a-axis: -15°; +195° 4 pneumatic clamps automatic positioning of clamps 2x endstops motor 5kW/20000 RPM : ISO 30 Centralised automatic lubrication system automatic toolchange with 10 positions ONLY 148 hours Bdodpfx Akjy Ec Iuoxsb

Condition: ready for operation (used), functionality: fully functional, empty load weight: 2,580 kg, maximum load weight: 32,000 kg, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 720 mm, loading space volume: 7.5 m³, Year of construction: 2009, Platform transport trolley Brand: Plan Type: 70-4 Dimensions platform: 3000X2500/H720 mm Load capacity: 32000 kg Total dimensions: 5100x2500/H 720 MM Year of construction: 2009 Own weight: 2580kg This trolley is double steered and has double full rubber wheels with metal rims. The triangle is removable and can also be hung on the other side of the trolley. Bdsdpfxjwarxxo Akxsb The floor is fitted with a thick iron tear plate.

Year of construction: 2007, condition: good (used), - Used machine - Saw blade: 400 mm - Saw blade tiltable 0° left to 0° right - Hydropneumatic saw blade feed - Horizontal and vertical clamps - Motor power: 1.8 kW / 400 V - Cutting width: 242 mm Bdsdpey E Itpefx Akxjb - Cutting height: 140 mm - Incl. measuring roller conveyor 4000 mm - With digital readout and handwheel - Ex-stock, loaded free of charge

Condition: good (used), Year of construction: 2003, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 900 mm, spindle diameter: 152 mm, FPT MAR-X 3, 2003 CNC SELCA 4045 PLUS DIGITAL, Built 2003, CNC can be changed to Heidenhein 620. FPT TRT25. Rotary Table, 25 Ton. Two axis Head, 144 x 144. Bsdpswdm A Hjfx Akxsdb X, Column travel 14.000 mm Y, Headstock vertical travel 4.000 mm Z, Ram stroke 1.500 mm W, Spindle Ø 152,4 mm 900 mm Spindle taper ISO 50 Spindle speed 0 - 2.500 rpm Spindle motor 48 kW Automatic tool changer 40 Tools FPT TRT25. Rotary Table, 360.000° 2.500 x 2.500 mm Rotary Table longitudinal travel 2.000 mm Table load 25 Ton

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,800 mm, table width: 2,000 mm, feed length W-axis: 700 mm, workpiece weight (max.): 12,000 kg, milling spindle length: 700 mm, FPT CASTEL RED HEIDENHEIN TNC 430. Built in 2007. X=3100mm Y=2000mm Z=1000mm Table 2000 x 1800 mm, 12 Ton Cooling through spindle. X Column travel 3,100 mm Y Headstock vertical travel 2,000 mm Z spindle stroke 700 mm W Column in spindle direction 1,000 mm Spindle diameter 130 mm Spindle diameter ISO 50 Spindle speed 3000 rpm Spindle motor 37 kW Rotary table size 1,800 x 2,000 mm Bjdjwdiu Ejpfx Akxsdb Table load 12 tons C-axes 360,000°

Year of construction: 2005, condition: used, CNC Machining Center 4 Axes – FOM (Aluminium/Steel Profiles) Configuration: 4-axis CNC Working length (X): 7,030 mm Condition: Working, maintained - Main Features CNC machining center designed for drilling and milling operations on aluminium and steel profiles, ideal for window and industrial profile production. 4-axis spindle (0° / 90° / 180°) for multi-side machining Electrospindle 4 kW – up to 12,000 rpm Tool holder: ISO 30 DIN 69871 6-position automatic tool magazine 6 pneumatic clamps (manual positioning) THK linear guides for high precision - Control & Software Software: FomCam + Prof2 (Windows XP) Easy programming with automatic CNC generation Movable control console (PC + display + keyboard) Barcode reader connection Remote control capability 📏 Technical Data X-axis: 7,030 mm Y-axis: 1,100 mm Z-axis: 425 mm Machine dimensions: 8,307 x 1,875 x 2,460 mm Weight: 3,200 kg - Equipment Forced air spindle cooling Inverter-controlled spindle Bjdpfx Aksywhf Nsxedb Automatic lubrication Protected tool magazine with rotary system - Machine ready to work, ideal for aluminium profile machining and window production.

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Single-head cutting machine OMC GIOBI 600 with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m and inlet conveyor PORTER 4,2m Bodpey Erwfjfx Akxedb Year 2021 Condition: ex-demo, like new - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Bodpey Av Rdsfx Akxodb Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Condition: used, Height-adjustable workbench HANDKE Industrial Technology Height-adjustable workstation, work table, electric workbench Table length: 1100 / 1700 mm Table depth: 600 mm Foldable table length: 600 mm Working height: from 830 to 1200 mm - Tabletop coated with melamine resin: 40 mm - Tabletop with hydraulic lift system - Height adjustment via hydraulic pump with hand crank - Sturdy base frame made of aluminium system profile Bsdpfx Akoitv Nvexedb - Mobile with 4 large castor wheels (swivel castors) - Rear panel with standard square perforation - 1 drawer compartment W x D x H = 675 x 210 x 80 mm - 1 cabinet base unit W x D x H = 160 x 580 x 560 mm Overall dimensions L x W x H: 1200 x 660 x 1560 mm Weight: 90 kg Very good condition, as new 2 units available Price per unit

Condition: used, Year of construction: 2014, Manufacturer : Alliance Inox Industrie Type: Vertical cylindrical stirred tank Year : 2014 Bdjdsyvv A Tjpfx Akxob Useful capacity: 3,000 litres Material : 304 L stainless steel Operating temperature: 20 to 60°C Agitation: 2 three-bladed impellers, 100 rpm Engine power: 10 kW ATEX class: Ex zone II T3 ext   Jacketed : 837 L Pressure: 1.5 bar Heating: 2 x 4.5 kW immersion heaters PT100 temperature sensor: inside the tank Sonde de température PT100 : Jacket   Empty weight : 2000 kg Dimension : Ø 1563 x 4831 mm Central drain DN63   Motor checked and tested prior to sale. Drawing available on request

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC530, spindle speed (max.): 18,000 rpm, spindle nose: hsk 63, number of spindles: 30, Equipment: chip conveyor, documentation/manual, FPT vertical machining center model RAID Travels 1500X1100X600 mm Bodpex H Iylefx Akxsdb 30-position tool changer HSK 63 spindle, 18,000 RPM (overhauled in 2025) CNC HEIDENHAIN iTNC 530 Remote electronic handwheel Chip conveyor

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO - Tungsten carbide saw blade Ø 300mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices Bjdpfxjf Nwxwe Akxjdb - Two horizontal vices - Set up for the extraction of chips and fumes

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices Bodpfx Akehyugljxedb - 8-positions star-shaped length stop