Used Klose Dpl9 for sale (31)

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M06L/7022, Offer Number: M06L/7022 Machinetype: double blow header Make: KLOSE Type: DPL9 Constr. year: 1978 diameter range: 4-9 mm Lhedpfx Aswi Ta Ajkqef shaft length under head: 100 mm cutting length: 120 mm output pieces/min: 100 Location: In our warehouse

Condition: used, Year of construction: 1980, machine/vehicle number: V 109331, functionality: unexamined, power: 4.8 kW (6.53 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 500 mm, tool diameter: 125 mm, number of blades: 2, actuation type: hydraulic, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total length of planing tables: 2,500 mm, overall weight: 950 kg, Martin surface planer T 51, planing width 500 mm, 2-knife strip cutterblock, infeed table length 1,400 mm, outfeed table length 1,100 mm, straight edge, auxiliary fence, adjustable fence from 0 – 45°, weight approx. 950 kg, sold as inspected, not overhauled, ex location Seevetal, subject to prior sale. Lhsdsy E Rv Tepfx Akqof

Condition: good (used), Year of construction: 2013, power: 4 kW (5.44 HP), operating pressure: 10 bar, Equipment: refrigerant dryer, Schneider Unimaster Piston Compressor UNM STS 660-10-500 XSDK 2 cylinders, soundproofed, Intake capacity 660 L/min, Delivery rate 520 L/min, 10 bar, Motor 4 kW, 380 Volt, 50 Hz, Tank volume 500 liters, complete with: Refrigeration dryer DK 600 ECO, Oil/water separator ÖWAMAT 10, ECOMAT condensate drain, Pre- and fine filter, as inspected, ex location Seevetal, Lhedsy E Iz Topfx Akqof subject to prior sale.

Condition: used, functionality: unexamined, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 410 mm, number of blades: 2, actuation type: manual, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total length of planing tables: 2,500 mm, total width: 410 mm, overall weight: 650 kg, Kamro Abrichthobel AFK 4, planing width 410 mm, infeed table approx. 1280 mm, outfeed table approx. 1200 mm, 2-knife strip cutterhead, motor 3 kW, as inspected at site in Seevetal, subject to prior sale. Lhjdpfxey E Ivwe Akqef

Condition: used, Year of construction: 1987, machine/vehicle number: AB-14022, power: 4 kW (5.44 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 410 mm, number of blades: 2, actuation type: manual, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, total length of planing tables: 2,000 mm, total width: 400 mm, overall weight: 580 kg, SCM Jointer-Thickness Planer 2000 d.FS Planing width: 400 mm Jointer table: 950 / 950 mm Lhjdpfxoxnpn Ro Akqef Cutterhead speed: 4000 rpm 3 strip planer knives Planing height: 3 - 200 mm Feed rate: 4.5 / 8 m/min Max. cutting depth: 8 mm Motor: 4 kW / 400 V / 50 Hz Weight approx. 570 kg As inspected, ex location Seevetal Subject to prior sale

Condition: good (used), Year of construction: 2007, machine/vehicle number: 1386, functionality: fully functional, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, year of last overhaul: 2025, Hebrock Edge Banding Machine AKV 3003 DK F Edge banding machine with hot melt adhesive application to the workpiece for edge material up to 8 mm and joint trimming including DIA tools - ergonomically positioned control panel - easy adjustment options from the operator’s side (digital displays) - maintenance-free quick heat-up glue pot - robust chain drive - high-frequency crosscut saw (300 Hz) - high-frequency flush milling station incl. tool fitting and fine adjustment from the operator’s side - automatic edge feed - safety and noise protection hood - extendable workpiece support - electronic temperature controller - pneumatic end trimming for up to 3 mm edge thickness and 60 mm edge height - double roller upper pressure - signal lamp for workpiece tracking Lsdoyud Sfopfx Akqehf - aggregate viewing window from operator and rear side - CE-compliant safety standard complete with: - surface scraping unit - corner rounding cutter - 8 mm edge thickness Workpiece height approx. 10 - 40 mm, Feed rate approx. 10 m/min, Power consumption 11 kW (31 A) 400 Volt, 50 Hz, Length approx. 4300 mm Weight approx. 1250 kg Sold in current condition as inspected, ex location Seevetal, excluding freight and packaging, sale subject to prior sale.

Condition: used, machine/vehicle number: 650597, Motor 1,65 kW cutting length approx. 2450 mm Lodpfx Akoimd D Aoqjhf saw blade diameter approx. 150 mm pneumatic tension space requirement approx. LxWxH mm 3000 x 1000 x 1600 ex location Seevetal, subject to prior sale, sold as seen, without transport

Year of construction: 2026, condition: new, machine/vehicle number: 1568, Working area 3500 x 1500 mm (Frame inner dimensions approx. 3400 x 1400 mm) Folding table with 12 mm tabletop for space-saving installation Becker vacuum pump with motor 1.25 kW, 400 V, 50 Hz Vacuum pump delivery rate 40 m³/h Tank capacity 100 l Natural rubber membrane with 700% elasticity Ledpfx Aod Rzl Uekqohf Max. component height approx. 600 mm External dimensions approx. 3600 x 1850 x 1000 mm incl. undercarriage with 4 swivel castors Weight approx. 440 kg without transport, ex stock Seevetal,

Year of construction: 2021, condition: new, machine/vehicle number: GWH432125, Working width 1,100 mm, sanding belt dimension 1.120 x 2.150 mm, max. working thickness 160 mm, combi sanding unit with calibration roller D = 150 mm, pneumatic sanding shoe with insert control, motor 15 kW ( 20 PS), sanding belt speed 18 m per second, stepless feed carpet 4 - 20 m/min., feed motor 0,55 kW (0,75 HP), electric table positioning with motor 0,24 kW and digital LCD height display, mechanical "ECO GEAR SYSTEM" (oscillation of the abrasive belt), automatic carpet centering, Automatic EMERGENCY table lowering, Check-Control-Panel, Automatic sanding roller stop on the control panel, Sanding grit compensation with 6 positions 2 rollers each in the infeed and outfeed, suction connection D = 160 mm, machine with CE - regulations Dimension approx. L x W x H, Lhedpfx Akjhgmmaeqef 1.650 x 1.800 x 2.025 mm Weight approx. 1.300 kg, (identical in construction as Unitek LC 1120 1N KRT) ex stock Seevetal, subject to prior sale, without transport, assembly and instruction

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, filling capacity at 6 bar approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, motor 400 volts, 50 Hz, 4 kW with Condor pressure switch and pressure gauge, incl. pre-filter, refrigeration dryer (230 volts), automatic boiler drainer (230 V), and oil/water separator, Ljdowgcb Depfx Akqehf bolted on a safety pallet with rubber vibration mounts, available for immediate delivery from our Seevetal location, excluding transport, subject to prior sale.

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage compression mobile piston compressor The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 674 l/min., filling capacity 505 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1 , Engine power 4 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale. Lhodpfx Asvl Ev Aekqef

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to Ledpfovl Euxsx Akqjhf high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, engine power 3 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Year of construction: 1994, condition: good (used), Working area approx. 2-080 x 1,430 mm, lateral baffles right and left, Filter area approx. 1,800 x 1,300 mm, 2 rows of paper volume filters approx. 650 x 1,800 mm inside fine filter G4 approx. 1.350 x 2.000 mm, air capacity 4.500 m³/h, Ledpfxopvil Te Akqshf pressure max. 500 Pa, motor 1,1 kW / 1.400 rpm.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, Lhedpfx Ajvl Eynskqjf subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the 'new' own brand of: HoKuTech GmbH & Co. KG --- Slot Mortising Machine VD 20 R Motor 1.5/1.9 kW, Lateral travel in Y-axis 250 mm, Longitudinal travel in X 340 mm, Vertical travel in Z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. Ljdpforxcyljx Akqohf One-hand dowel boring device with divisions 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Table rotatable +/- 45°, Weight approx. 345 kg available immediately from stock Seevetal, subject to prior sale,

Condition: used, Leitz HM - IV 66 window set with faceplate and front door set. Sold in "as is" condition, tool has not been resharpened, Lhjdpohzgy Nefx Akqof ex location Seevetal, without transport, subject to prior sale,

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swing Spindle Moulder TX 160 "Partnership Edition" Fence including parallel adjustment with handwheel and digital readout, Handwheel adjustment with digital readout for front fence jaw, Electric travel swing mechanism for the complete fence, Quick-release lever for locking, Aluminium fence jaws and pressure device, curved fence, Electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for the selected spindle speed, Electrics and safety devices according to CE standards, Table dimensions: 2,500 x 780 mm, Lhsdpfxsvlw Ido Akqsf Spindle: diameter = 30 mm, height = 140 mm, Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm, Max. tool size under table: diameter = 320 mm, height = 50 mm, Motor: 7.5 kW / 10 HP, 400 Volt, 50 Hz, Including automatic star-delta switch, Sound level according to EN 27960: 83.9 – 87.3 dB(A), Spindle tilt: -45° to +45°, Electromotive spindle tilt adjustment including electronic readout and decimal impulse setting, "Partnership Edition" complete with: "L" version with bilateral table extension and pull-out workpiece support with EMERGENCY STOP button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Forward/reverse rotation in accordance with CE standards, Prepared for installation of AIGNER integral fence jaws, Available ex-location Seevetal, without pre-carriage, freight, or commissioning, As inspected, subject to prior sale.

Condition: used, Year of construction: 1980, machine/vehicle number: 18.742, Table milling machine with rigid milling spindle Table size 1,920 x 900 mm, Ljdjul Sfmepfx Akqjhf Motor 6/8 kW (8/11 HP), 4 speeds 3,000/6,000/4,500/9,000 rpm, Milling arbor D = 30 mm with Morse taper MK 5, weight approx. 700 kg, ex location Seevetal, Sale in "as is" condition as inspected, without transportation, subject to prior sale

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, input frequency: 50 Hz, type of input current: three-phase, total length of planing tables: 2,250 mm, overall weight: 695 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, planer shaft diameter: 120 mm, planing height: 240 mm, Equipment: motor brake, Holzkraft surfacer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Surfacing table length 2,250 mm, 4-knife TERSA cutterblock, Motor 7 kW (9.5 HP); S6 5 meter connection cable 2.5 mm² with 16 Ah plug, complete with: Lhsdpfxsxn Suaj Akqjf simultaneously foldable tables, combined extraction hood for surfacer and thicknesser D = 120 mm, Thickness table adjustment via handwheel with integrated readout, star-delta switch, auxiliary fence, CE and BG - wood dust certified. Order no.: 5503501 Available immediately ex location Seevetal, without transport, subject to prior sale.

Year of construction: 1996, condition: reconditioned (used), machine/vehicle number: 16319, max. machining dimensions 220 x 120 mm (raw wood dimension max. 230 x 130 mm) min. machining dimensions 15 x 6 mm, automatic positioning "Hecht-Posiomat", feed rate 6 - 22 m/min, feed roller pressure 6 bar, spindle diameter D = 40 mm, max. chip removal 10 mm feed table 2.000 mm, feed motor 2,2 kW, height adjustment 0,37 kW, dressing spindle 4 kW, Lsdpfx Ash Euvmekqehf joining spindle 4 kW, left profile spindle 4 kW, thickness spindle 5,5 kW, glazing bead separation, ex location Seevetal, in "as is" condition as viewed, subject to prior sale, without freight and packing

Condition: ready for operation (used), machine/vehicle number: 06G1062, Drive = compressed air, Material/air ratio = 17:1, Material pressure max. 110 bar, Air inlet pressure 1 to 7 bar, Lhjdpfsiv Ht Iex Akqjf Delivery rate per double stroke 60 cm³ with gun type MX with double hose, unused since last service 01/20, condition as inspected, ex stock Seevetal, subject to prior sale

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = compressed air, Material/air ratio = 16:1, Material pressure max. 90 bar, Air inlet pressure 1 to 6 bar, 4 double strokes for 1 liter of material, with gun type MX with double hose, Lhsdpfeiv Huwox Akqjf unused since last service 01/20, condition as seen, ex stock Seevetal, subject to prior sale

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimension 2,240 x 880 mm, motorized height-adjustable counter bearings, 4 pressure beams, can be switched on and off individually, 4 pendulum grids, Lhjdpfxsul Uy Hj Akqsf ex location Seevetal, Sold in "as is" condition as viewed, without transportation, subject to prior sale

Year of construction: 2022, condition: new, Motor 2,2 kW (3 HP), sanding belt 2280 x 150 mm, swivelling edge sanding unit, motorized belt oscillation, support table at the deflection roller pneumatic belt tensioning table size 700 x 350 mm, working surface 1000 x 150 mm, belt speed 22 m/s, Ljdpjffyc Njfx Akqehf roller diameter 140 / 80 mm, suction nozzle D = 100 mm ex stock Seevetal, subject to prior sale

Year of construction: 1978, condition: used, machine/vehicle number: 1010, Roll diameter 1.000 mm band saw blade length 7.100 mm, max. cutting width 960 mm, max. cutting height 620 mm, motor 5,5 kW, table size 1.450 x 1.030 mm, installation dimensions L x W x H: 1,900 x 1,160 x 3,130 mm Sale in "as is" condition, ex location Seevetal, without freight and packing, Ljdpfxjhzgnzo Akqehf subject to prior sale