Used Lorenz Ls 256 for sale (3,187)

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm Itsdpjxyadtofx Abgef table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Isdoyw Hxnspfx Abgstf Technical Data Diameter: 1250 mm Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 Ijdpjydfn Tsfx Abgjtf adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: like new (used), number 2 Stück taper ISO SK 40 Milling holder/chuck for Lorenz LS 156 Iodpfx Abouiz Hysgstf

Condition: good (used), max. ram stroke 230 mm throat 230 mm table diameter 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown Itsdpfxjw Ny S Ro Abgof

Condition: like new (used), max. wheel diameter 420 mm gear width 120 mm max. module 8 min. module 0,5 control BWO CNC no. of strokes 32-800 Hub/min Itjdpfstycgfsx Abgef total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC x-travel 360 mm z-travel 154 mm L-travel 137 mm max. table load 1000 kg Control system Total power requirement 50 kW Machine weight approx. 8400 tonnes Space requirement approx. 5.3 x 3.9 x 3.5 m o Straight guide o Machine elevation 200 mm o With automatic workpiece clamping device o Counter holder Year of construction: approx. 1989

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: SIEMENS, controller model: n/a, overall weight: 7,000 kg, This 3-axis LORENZ LS 150 was manufactured in 2015. It features a connected load of 60KVA, a rated current of 50A, and operates on a 400V system. Weighing 7000kg, this machine has been modernized to enhance performance. If you are looking to get high-quality milling capabilities, consider the LORENZ LS 150 machine we have for sale. Contact us for more information. Additional equipment • Rolling, single tooth parts, spiral feed Machine Benefits Technical Machine Benefits • Operating voltage: 400v • Connected load: 60kva • Rated current: 50a • Frequency: 50hz • Main fuse: 63a • Retrofit: a cnc retrofitting was carried out in 2015, sinumerik 840d control system. • All mechanical components checked, all hydraulic components checked and hoses replaced. • All necessary components were installed to guarantee problem-free production. Extra Information Itsdpfx Ajx D Iyqebgef Machine still under power // All necessary components were installed to guarantee problem-free production.

Condition: ready for operation (used), Year of construction: 2008, number of axes: 4, This 4-axis Lorenz LS 420 was manufactured in 2008. It features a NUM control system, capable of handling external and internal splines, single points, and segment splines. It can manage spline jointing up to B = 25 mm and spline hub profiles. The stroke length is 140 mm. Consider the opportunity to buy this Lorenz LS 420. Contact us for more information. Additional equipment • rolling, single tooth, spiral feed Machine Benefits Qualitative Machine Benefits • Modernized and converted to cnc 2008 with all mentioned processes. Technical Machine Benefits • Stroke length: 140 mm • External splines • Internal splines • Single points • Segment splines Ijdex D Iykjpfx Abgjtf • Spline jointing up to 25 mm • Spline hub profiles internal / external • Splines up to quality 6 / 7 Extra Information Machine still under power

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 20-14446, wheel width: 1,000 mm, stroke length: 200 mm, Gear shaper with cutter – module 10 – max. diameter 1000 mm – vertical rise 250 mm – stroke 200 mm – equipped with two additional tables of 850 mm and 1500 mm diameter – many accessories and programs for 1-2-3-4 cycles and for spiral cutting. Iodpsybaz Nsfx Abgjtf

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate Itjdpfx Abjt Hww Degof different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: used, Year of construction: 1973, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7000 kg Isdpfx Aet Hw Hlebgstf

Condition: used, Year of construction: 1988, machine/vehicle number: 14411, stroke length: 220 mm, table diameter: 730 mm, For sale is a Lorenz LS 630. A robust and precise machine, renowned for its high build quality. The machine requires technical refurbishment due to the control system, but is in very good mechanical condition. It can process components up to module 12. A stable and high-quality Lorenz LS 630 that can be made fully operational again with some effort. Isdpfxsxrcmbj Abgstf

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Itsdpfx Aswvbqiobgof Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Itodpoxwl Tzofx Abgjf Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Itodpfsxwl N Aox Abgef Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Itsdpfoxwlmujx Abgsf Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: excellent (used), max. wheel diameter 500 mm Iodpfxjyyqt Uj Abgotf gear width 75 mm max. module 5 min. module 0,5 no. of strokes 45 - 424 Hub/min total power requirement 6 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 2,0 x 1,4 x 2,3 m Rapid traverse in the table. Change gears, toolholders, manuals.

Condition: excellent (used), max. wheel diameter 1000 mm gear width 160 mm max. module 7 Itjdpsydfn Hefx Abgef min. module 0,5 distance table - lower edge of ram 230 mm no. of strokes 31 - 175 Hub/min tool taper MK 4 total power requirement 6 kW weight of the machine ca. 5,2 t change gears, tool-holders, clamping plates, manuals,...

Condition: used, Technical data: - Manufacturer Leif & Lorenz - Working width max. 1,200 mm - Brush diameter *160 mm - Suction connection D100 mm Itjdpfx Abevvbqwegsf - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg - Also available for assembly with roller or belt conveyor

Year of construction: 2022, condition: good (used), Test stand for filter testing, filter testing, filter test system, filter measurement system, filter test system Itjdpfsyk Ahwsx Abgof -Manufacturer: Lorenz, Filter Test System Type FMP 03 with accessories -Filter holder: Type FH 143/149 -Accessory case: with extensive contents -Individual components/accessories: see photos -Dimensions: 600/560/H975 mm / 640/460/H1130 mm / 430/340/H125 -Weight: 146.3 kg

Condition: used, Clamping unit for SK 40 tools. The metal tag reads Lorenz Ettlingen 7-191-020-0001 For secure clamping of tool holders with SK40 during tool changes – tool setup E.g. as an accessory for Lorenz gear shaping machine. Clamping vise / mounting table / clamping cube. Clamping device for reliable fixation and securing. Itjdpfx Aoyuwzmsbgsf Price / details upon request All technical data subject to errors/misprints. We sell exclusively to countries within the European Union.

Condition: used, Year of construction: 1997, material width 820 mm coil weight 7,5 t material thickness 0,8 - 5,0 mm coil internal diameter 470 - 520 mm coil external diameter 1600 mm Itjdpfsyx Ih Tjx Abgef material cross-cut 1600 mm² no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min Decoiler HH 7500.1 with: - hydraulic expansion and automatic re-tensioning - material centre adjustment - adjustable pneumatic disc brake - counter-holder with quick clamping - circular guard ring - fixed coil loading chair Insertion aid consisting of: - snubber roll (driven) - infeed wedge - hold-down roll Straightening machine BRM 50/820.7 with: - automatic circular oil lubrication of the cardan shafts - torque-dependent overload protection - motoric roller cassette adjustment with digital display - quick-change device of the cardan shafts - quick-change device of the straightening rolls Transfer table + ultrasonic control BÜU-5 with: - loop control via ultrasonic sensor (analogue) - strip sag monitoring (min/max) - strip end monitoring

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm Ijdpfx Aeyb Sx Tobgjtf adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm Ijdpou Uu S Tsfx Abgjtf no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm Itsdotycg Sepfx Abgef spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981