Used Lsh Esterer for sale (229)

Condition: excellent (used), Spare parts for creel LSH 65, partly as good as new, new and used. Swing, stilts, hydraulic cylinders, chain drives, feed gears, guides, solenoid valves, overhang parts. Saw frame top and bottom, Iodpfx Aei T Egpobgotf Saw hook with insert hinges. Pulleys. Spare parts also available for Esterer sash gang SS 71.

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. Isdpfx Aeyl Afrebgstf HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Itsdpjyhduyefx Abgjf Location: Austria, near Graz

Condition: excellent (used), Cross-country trac/multi-saw receiver Rollers width 1160mm Number of drawing rollers 14 Distance between rollers 550mm Drop chains with takers 4pcs Longest element 820cm Itsdjtrq S Hopfx Abgjf Use behind a sawmill or a multi-saw

Condition: good (used), Hydraulic power unit for Esterer LSH saw frame year 2006 Type: RP 63 WÜ feed for LSH also available fully functional - good condition - immediately available Location: Austria, near Ried im Innkreis Iodpfeg R Sm Djx Abgotf Visit also my other advertisements. I am looking forward to your inquiry.

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates Itjdpfsw Dn S Asx Abgef With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm Iedpfx Aeyg Im Rebgstf - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Itsdpfxsrmmqzs Abgsf

Year of construction: 1980, condition: used, passage width 560 mm passage height 560 mm Itjdpfxecvhnds Abgef stroke 600 mm Speed max. 320 1/ min. The creel is completely mechanized with new Moehringer high speed infeed.

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Itjdemqkr Dspfx Abgef

Condition: good (used), Year of construction: 1971, Esterer frame saw with many spare parts and at least 40 new and used saw blades. The gang saw is in a good, ready to use condition with minimal bearing play. Itjdpfxsncfiyj Abgjf After agreement the saw blade grinders can be sold with the saw.

Condition: used, Esterer DKV double edger Iedpfx Abjy Da Iiegjtf Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws with roller infeed with lath head with sliver separator with drive motor (45 kW) with control cabinet with saw blades Location: Germany, near Lake Chiemsee

Condition: used, Esterer DKE Trim Saw Passage width: 600 mm Passage height: 160 mm with roller feed Itjdpfx Asy Da Hfjbgof with roller table/outfeed table Location: Germany, near Chiemsee

Condition: used, Frame Saw Esterer S71 700 mm frame width 500 mm stroke with frequency-controlled feed with saw blades with hydraulic saw tensioner (+spare bar) with drive motor with intermediate gear with riving knife (Arta-C) Itsdpfx Absy Da Ensgof Location: Germany, near Chiemsee

Condition: good (used), Hydraulic clamping trolley Type VS. Track width 790 mm. Trolley height 390 mm. With auxiliary trolley HEH or HKE. Isdpfxsxwn Rvj Abgstf

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. Itedpfst Hg Hujx Abgjf 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: excellent (used), functionality: fully functional, Complete hydraulic feed unit for EWD Esterer creel type HDE. Itsdporrxtpefx Abgjf Very well maintained. Infinitely variable from 0 - 12m / min.

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Iedpfsxw Ubnjx Abgetf

Condition: excellent (used), functionality: fully functional, Base plate for Esterer sash cutters type SS 71 or HD 71 with main shaft and bearings. Itsdpfsth Udmsx Abgsf Equipped with full and idle pulleys.

Year of construction: 1990, condition: excellent (used), 1 piece mass balancer for creel. Itodjfm Ev Rjpfx Abgef With complete accessories and attachments. Little been in use.

Condition: excellent (used), 2 pieces stilts for Esterer creel type EHD 30. Only 6 years in use. Also for other Esterer creel types stilts and spare parts available. Itjdjip Uf Uepfx Abgef

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Iedpfxjxw Uf Ts Abgjtf

Condition: used, maximum load weight: 27,920 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/1993, next inspection (TÜV): 02/2027, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, * Fixed tank with 6 compartments, total capacity 40,320 liters * 7,360 l / 7,430 l / 6,750 l / 5,400 l / 5,880 l / 7,500 l (compartments 1-6) * FMC MultiFlow tanker control system * FMC GMV Z1000 tanker hydraulics * Epson printing unit * Hose reel at rear right ----* Knorr braking system with ABS * BPW axles with drum brakes * 1st axle liftable * Central lubrication system * ADR certificate as per 9.1.1.2: FL & AT * Tank coding according to 45.3.3.1 ADR: LGBF ----* Tire size: 385/65R22.5 Ijdpfxoyx R Hrs Abgstf * Technical gross weight: 34,000 kg * Unladen weight: 6,080 kg * Total length: 11,350 mm * Tank periodic inspection due: 02/2026 * Tank hydraulic pressure test due: 02/2029 * Next safety inspection due: 08/2026 ----Vehicle number: 11955----Subject to errors and prior sale----Advertising and various lettering digitally removed. -----We are happy to assist you with all the administrative procedures involved in purchasing a vehicle. Simply let us know your requests and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicleTÜV/Safety Inspection approvalComplete export handlingBrokerage of financingApplication for export license platesTransfer of vehiclesRegistration of vehiclesRecovery and vehicle transport----Your VTS Team

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement. Ijdpfxjyw Sv Ej Abgetf

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Isdpfx Absywh Hmjgetf