Used Mitutoyo Cv-500 for sale (15,757)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Description: Mitutoyo Manufacturer: Mitutoyo Type: CV-500 The Contracer is complete with PC, software, monitor and vice. Nedpfx Aetxyv Iskqsla

Condition: used, amplification -fold 10-fach diameter 500 mm workpiece height max. 210 mm digital readout 2 Achsen MITUTOYO Nlodpfxey Ehw Ue Akqea travel x / y 200 / 100 mm table-size 530 x 250 mm glass plate - dimensions 270 x 170 mm voltage 230 V weight of the machine ca. 210 kg dimensions of the machine ca. 0,80 x 1,05 x 1,70 m - Serial-No.: --- - 2-Axis digital readout

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Vertical measuring range Z = 50mm Column travel range Z2 = 350mm Inclination +/- 45° Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Nsdpfxjvun Tpj Akqsla Incl. cross table 218-001 Incl. rotating vice 2028-003

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 400181806, Mitutoyo CV-3200H4 CONTOUR MEASURING CONTRACER; MFG: 2018, code no.: 218-482-10D, SN: 400181806, made in Japan. Expands measurement range while reducing workpiece interference Mitutoyo’s newly designed detector arm lowers workpiece interference while expanding the measurement range in the Z1 axis (detector). Auto stop feature assures safety even during high-speed movement The detector includes a safety mechanism (auto stop upon collision) to assure measurement safety even during high-speed movement. If the arm is removed or shifts during measurement, the safety mechanism is triggered and stops the machine. Measuring range: X axis -100mm Measuring range: Z2 axis (column) travel range 3 - 60mm (±30mm in horizontal situation) Z2 axis (column) travel range 3 - 500mm Detector (Z1 axis (detector unit)) Scale unit - Arc scale Resolution 0.04µm Stylus up/down motion: arc movement Measuring direction: both pulling and pushing directions Measuring face direction: downward or upward Measuring force: 30mN (by adjusting weight) Stylus traceable range: Ascent 77°; Stylus traceable range: Descent 83° (with one-sided cut stylus: standard accessory); Drive unit Scale unit Separate type linear encoder Z2 axis (column) ABS encoder Resolution X axis 0.05µm Resolution Z2 axis (column)1µm Drive speed X axis 0 – 80mm/s and manual operation Drive speed Z2 axis (column) 0 – 30mm/s and manual operation Measuring speed X axis 0.02 – 20mm/s; Straightness (when the X axis is horizontal) X axis 0.8µm/100mm X axis inclination angle: X axis ±45° Accuracy (20°C) CV-3200 X axis ±(0.8 + 0.01L) µm L = Drive length (mm) Wide range: 1.8µm/100mm Narrow range: 1.05µm/25mm; Accuracy (20°C) CV-3200 X Z1 axis (column) ± (1.4 + | 2H | /100) µm H = Measurement height from the horizontal position; External dimensions (W×D×H): Main unit: 756×482 ×1166mm External dimensions (W×D×H): Controller: 221×344×490mm External dimensions (W×D×H): Remote box: 248×102×62.2mm Mass: Main unit: 150kg Mass: Controller: 14kg Mass: Remote box: 0.9kg Operating temperature range: 15 – 25°C (within ±1K temperature fluctuation on calibration and measurement) Operating humidity range: 20 – 80%RH (with no condensation) Rvcunpih32 Storage temperature range: −10 to 50°C Storage humidity range: 5 – 90%RH (with no condensation) Price Euro 15.900 Euro + VAT, negotiable, ExWorks Simeria, Romania. Please make an offer. Nsdewz Sxnspfx Akqola Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Nledpotvm Smjfx Akqoa Target µm: 16 Actual µm: 10,00 Own weight: 85kg Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Equipment: chip conveyor, Options: Chip conveyor 48-tool magazine High-pressure coolant Overload detector Detachable handwheel Mist collector Nsdpeywttrefx Akqola 5-axis machining package SMOOTHX 6 additional M-codes Performance package Engraving function 8 MB memory extension

Condition: new, power: 397.17 kW (540.00 HP), fuel type: diesel, axle configuration: 8x4, color: white, gearing type: automatic, emission class: euro6, Equipment: hydraulics, onboard computer, retarder, trailer coupling, New Iveco T-Way 500 / 540 HP Emilcamion 20 m³ tipper body with hydraulically operated tailgate BRAND NEW FROM FACTORY TO BE REGISTERED - Transmission: Automatic - Retarder: Intarder PERSONALIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL HEADQUARTERS NAPLES DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – AUTHORIZED DEALER FOR MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 – SATURDAY 8:30/14:00 Nlodpsv H Skcefx Akqea WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES, INCLUDING: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder- 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper body – 4 axles – Rear 4 axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain-side – Box – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck Ltd. disclaims all liability for possible discrepancies regarding technical specifications, equipment or options that may, in some cases, differ from those listed in the description. We invite you to verify the features of the specific vehicle.

Condition: new, functionality: fully functional, power: 426.59 kW (580.00 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,790 mm, brakes: intarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, airbag, low noise, navigation system, onboard computer, parking heater, spoiler, Iveco Stralis S-Way 500 / 580 HP Multiple units available Brand new from factory To be registered Immediately available for delivery - Retarder: Intarder - 0 km mileage - Full air suspension - ADR compliant for all classes - Stationary air conditioning - Double bunk - Navigation system - Alcoa alloy wheels - Michelin tyres POSSIBILITY OF TAILORED FINANCING OR LEASING DIRECTLY ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: Nodpfsv H Sqvjx Akqola DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY–FRIDAY 8:30–19:00 / SATURDAY 08:30–14:00 WE OFFER A WIDE SELECTION OF MULTI-BRAND USED COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Fixed body – Crane – Tipper – 4 axles – Rear 4 axles – Tway – T-Way-540-460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition Curtain-sided – Box – Tail-lift – Refrigerated cell – Insulated with fridge – Panel van Domenico Truck srl declines all responsibility for any discrepancies regarding technical features, options, or characteristics that may, in some cases, differ from the specifications stated in the description. We kindly invite you to verify the features of the specific vehicle.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 252 mm, travel distance Y-axis: 152 mm, workpiece weight (max.): 40 kg, input voltage: 110 V, type of input current: AC, total height: 1,155 mm, total length: 1,137 mm, space requirement width: 467 mm, overall weight: 155 kg, table length: 450 mm, table width: 146 mm, Equipment: lighting, Mitutoyo PH3500 Profile Projector Used Mitutoyo PH3515F for sale in good condition. Manufacturer: Mitutoyo Type: PH3515F Built-in linear scale Magnification: 10x Display size: 353mm Digital angle measurement with 1' or 0.01° accuracy. Built-in linear scales for use with optional display counters. +/-0.1% or less (contour), +/-0.15% or less (surface) Working area range X-axis horizontal movement: 254 Nedpfx Akowr U A Dsqsla Y-axis vertical movement: 152 Table size: 450x146 mm Light source: Halogen bulb 24V 150W Suitable for thread pitch measurement – ​​No blurred or distorted image when the workpiece is tilted. Still image on the bright screen in the living room. Standard dual fiber optic illumination. 14" (353 mm) diameter protractor screen with crosshairs and stepped lines for easy alignment. Digital angle measurement with 1' or 0.01° accuracy. Durable workpiece table features linear scales for fast and accurate measurement. Height: 1155mm Length: 1137mm Width: 467mm Weight: 155kg

Condition: excellent (used), Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality Mitutoyo QS250Z CNC vision measuring machine from 2017, in excellently maintained condition. This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Distance, radius, angle, and diameter determination Nedpfxeynkbas Akqsla - Measurement of bores, grooves, edges, and complex geometries - Serial measurements with automated measurement programs - Documentation and report generation via Mitutoyo software Measurement is non-contact via a high-resolution camera system with image processing. Ideal for sensitive or small parts where tactile measurement is unsuitable. Thanks to CNC control, automated measurement procedures are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): 150–200 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) - Mitutoyo QS250Z main unit - Joystick box - Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form - Manuals & documentation - Various electronic boards (see pictures) - Further accessories as shown (Technical data and information subject to change and error!) For further questions, please feel free to contact us by phone.

Year of construction: 2004, condition: excellent (used), Capacity - 400 performs/min. Year - 2004/2008 Factory Consists : 1. Injection Moulding machine Nedpfogbpnmox Akqsla -Manufacturer - KRAUSS MAFFEI - Year - 2004 - Tip - 175-3500 CV - Power - 110 Kw - Clamping force - 1750 KN 2. Robot with Catcher for 48 performs - Year - 2004 - Tip - CB-PET 40 Fach 3. Preform Cooling Unit - Manufacturer - MHC Luksemburg - Year - 2004 - Tip - PL3 4. Injection Moulding Tool - Manufacturer - MHT Luksemburg - Year - 2004 - Preform Weight - 40,56 gr - Ejection Stroke - 114 mm - Weight of tool - 1150 Kg 5. Granulate Dryer - Manufacturer - PIOVAN - Italy - Tip - DP 625 - Year - 2004 - Power - 110 Kw 6. Granulate Silo - Manufacturer - PIOVAN - Year - 2004 - Tip - 4000 7. Cooling sistem - Manufacturer - PIOVAN -YEAR - 2004 - Tip - RPA 1200 - Power - 10,5 Kw 8. Crane - Year - 2008 - Tip - KVATP 2515E3 - Capacity - 5 tons - Dimensions - 7,5 x 2,0 mC -

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Nlodpfx Akjywwrfjqsa Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Nodofu Nbbspfx Akqjla Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: new, Year of construction: 2026, Working Area Travel X: 730 mm Travel Y: 450 mm Travel Z: 470 mm Swivel Range B Axis: 220° (±110°) B Axis Indexing: 0.0001° Swivel Range C Axis: 360° Table Load Capacity: 200 kg Max. Workpiece Diameter: 500 mm Spindle Speed: 12,000 rpm Nsdpfx Akour Nr Rsqela Power: 11 kW Torque: 57.3 Nm Tool Holder: SK-40 Tool Changer: 48 positions Equipment Tool Measurement: RLP40 probe Coolant System: 15 bar Rotary-swivel Table: 5-axis simultaneous machining Machine is available only in the DACH region.

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control MSC 803 25-fold automatic tool changer coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Nodpfx Aewhkcxskqsla Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x550 mm Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Spindelaufnahme / spindle taper BT40 Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card Nsdpfx Ajg Td Egokqsla -Manufacturer: Bachmann, analog distribution card from injection molding machine Battenfeld -Type: CVA500 CV-A500 B2532 / 00 -Number: 4x control card available -Price per piece -Dimensions: 160/100 / H40 mm -Weight: 0.2kg/pc.

Condition: excellent (used), functionality: fully functional, Tovaglieri Mebot Parallel Lathe 2000 x 250 Model: TVC 500 Bar Passage 50 Used Machine Internal code 159 Nlodexfkbtspfx Akqja

Condition: new, Year of construction: 2022, functionality: fully functional, total length: 1,600 mm, total width: 930 mm, total height: 1,980 mm, operating pressure: 29 bar, nominal heat output: 328 kW (445.96 HP), temperature: 240 °C, Brand New Certuss Universal 500 TC EG/NG gas-fired 500kg/hr steam generator with Certuss CVE 500 TC packaged plant module/supply unit The offer includes brand new & never connected: 1x 500kg/h Universal TC Gas Fired Certuss Steam Generator, year of manufacturing 2022 1x Stainless Steel feed water tank (insulated) 1x Steam Injection Tank heating facility Nedpfx Aoygu R Nokqsla 1x Electronic Level Controller for feed water tank 1x Stainless Steel Blow-Down facility 1x Stainless Steel sample cooler 1x Booster Pump and controller 1x Steam Separator c/w trap set 1x Simplex Water Softener 1x Water Meter 1x Water Filter 1x Chemical Dosing Tank and Pump CVE Package Plant Module, year of manufacturing 2022 Automatic Start/ Stop/ Blow-down Facility Generator pary Certuss Universal 500 TC EG/NG zasilany gazem o wydajności 500 kg/h z /jednostką zasilającą Certuss CVE 500 TC Ofera obejmuje nowy, nieużywany i nigdy niepodłączony komplet: 1x Wytwornica pary Certuss Universal TC 500kg/h zasilana gazem, rok produkcji 2022 1x Zbiornik wody zasilającej ze stali nierdzewnej (izolowany) 1x Instalacja grzewcza zbiornika z wtryskiem pary 1x Elektroniczny regulator poziomu wody w zbiorninku 1x Urządzenie wydmuchowe ze stali nierdzewnej 1x Chłodnica próbek ze stali nierdzewnej 1x Pompa wspomagająca i sterownik 1x Separator pary z zestawem odwadniacza 1x Zmiękczacz wody Simplex 1x Wodomierz 1x Filtr wody 1x Zbiornik do dozowania chemikaliów i pompa Jednostka zasilająca CVE rok produkcji 2022 Tryb Automatycznego startu/stopu/oddmuchu

Condition: excellent (used), continuous impact machine with vertical mixing head Nedpfxed Rt T Aj Akqjla for whipping cream and much more specified power 500 ltr. Raw cream /h including eenter screw pump and automatic tank change device The machine was only used for small production volumes and in 2011 out of service. Maintenance and hygiene tests have been carried out on a regular basis until then.

Condition: new, Year of construction: 2025, This handling device is suitable for handling large-area materials safely and stably with only one operator. The device can be added to any machine as an independent unit. The price-performance ratio is convincing; because the payback time is less than one year. Consisting of the following main parts: (also available separately) - column stand Nlodpfx Akefi Trboqea - swivel arm - Lifting traverse with operation Technical data VT 500: Lifting capacity: 500 kg max. lifting height : 1750 mm Lifting speed : 4 and 8 m/min Max. turning radius : 3900 mm Mains connection: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (depending on weight) Total height: 3580 mm Total weight: 850 kg Alternatively we offer this handling device with a lifting capacity of 1000 kg.

Year of construction: 2023, condition: new, Josan PVC Mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️ Net price only €18,999 ‼️ With our complete system, as shown in the picture, you can finely mill your plastics and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and all other types of plastic recycling machines available. Whether you are a large company, medium-sized business, or small enterprise, with our expertise we can cater to your individual needs in the recycling sector with our machines! We have machines in stock in Heilbronn for live demonstrations! From copper granulation plants, shredders, and electrostatic separators (for example, to separate sand from plastic, copper from plastic, different types of plastics, etc.), so you can directly reuse clean material. Just ask us. We manufacture the appropriate system tailored to your needs. Unfortunately, our English is not perfect. You’re also welcome to speak to us in Swabian! Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 fixed blades made from the hardest special steel alloy ▶️ All-inclusive as shown in picture ▶️ Weight approx. 1,200 kg Net price: €18,999.00 Nsdsqvmn Nepfx Akqola +19% VAT: €3,609.81 Gross price: €22,608.81 Subject to errors. Pictures/description may vary.

Condition: ready for operation (used), In excellent condition, needs nothing. Equipped with automatic system, programming feature, and remote control. Nsdpfx Ajy Atntokqela

Condition: not inspected (used), functionality: unexamined, total length: 700 mm, total width: 500 mm, total height: 1,000 mm, table length: 350 mm, table width: 150 mm, machine/vehicle number: 580235, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Table dimensions: 350 mm x 150 mm Projector diameter: 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 1,000 mm Machine weight: 200 kg EQUIPMENT Nlsdpfxoy D T Ics Akqja Three digital calipers External reference: 57

Year of construction: 2010, condition: ready for operation (used), number of axes: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Nlsdpfx Asx D D Abokqja Additional equipment • Joystick box • Tailstock • Spring-loaded tailstock • Clamping lugs: 35–37, 39–41, 55–57 • Clamping profile strip with end-face connection • Clamping profile strip without end-face connection • Connector with connection slots • MAG1 mounting • Spring clip 15° (short) • Spring clip 15° (long) • Threaded clamping holder • 30 mm cylindrical pin • 40/10 mm guide comb with longitudinal groove only • 120° prism with spring clip • The maximum length measurement deviation in the XY plane is 2.5 + 0.006 µm • Measuring range (X/Y/Z): 200 x 250 x 100 mm • Resolution: 0.5 µm (0.0005 mm) • Accuracy XY: (2.5 + 0.006 µm) • Accuracy Z: (5 + 0.006 µm)

Condition: excellent (used), For sale: precision toolmakers' microscope from renowned Japanese manufacturer Mitutoyo, model TM-101 (Code No. 176-901). This device is designed for inspection of dimensions, shapes, profiles, surfaces, and contours in tool rooms, measurement laboratories, and quality control departments. Manufacturer: Mitutoyo Mfg. Co. Ltd. Japan Type: TM-101 Mitutoyo digital readouts on X and Y axes with ABS and INC functions, preset, and data output Measuring cross-table with rotation and adjustment Lighting functions: Surface, Contour, Main Power supply: AC 220V, 50–60 Hz, 8 VA Robust, stable industrial construction Very good condition, complete device, technically fully functional and ready for operation. Ideal for measuring cutting tools, milling cutters, drills, inserts, inspection of precision components, as well as contour, thread, and geometry measurements of workpieces. Nlsdpjw R E Hiefx Akqsa