Used Okuma Macturn 550 for sale (2,893)

Condition: good (used), Year of construction: 2005, The machine has been maintained annually under a service contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Control: OSP-E 100 L Max. turning diameter: 720 mm Klsdpfxjyt Nvto Abger Distance between tailstock tip and spindle nose: 2,505 mm Y axis travel: 250 mm Main spindle speed: up to 3,500 rpm Spindle motor power: 30 kW Lower turret with 12 stations Milling spindle with infinitely variable B axis 80-position tool magazine HSK 100 tool holder 3-jaw chuck, diameter: 315 mm In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, the linear guides for X/Y/Z axes were renewed. All work was carried out by Okuma. The machine was cleaned. Covers and sheet metal parts were dismantled. 8th axis dismantled. Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine. All linear guides removed. Mating surfaces of the ZA axis cleaned. New ZA axis linear guide incl. carriages installed and secured at specified torque. New ZA axis ballscrew incl. bearings installed. Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected. ATC including auxiliary components reinstalled and connected. New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed. Travelling column installed and lubrication lines connected. XA base plate installed and aligned. 8th axis installed and aligned. H1 turret mounted - Install drive motor for 8th axis - Assemble 8th axis and new H1, set geometry - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various covers - Install chuck - Adjust zero points - Check tool change

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Kledpfoyxmyuox Abgsr Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno Kodpfx Ajvta Rkjbgslr We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Kedpfx Asxb Awfjbgslr Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0014, turning length: 1,500 mm, turning diameter over cross slide: 610 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel Distances X-axis travel: 598 mm Y-axis travel: 230 mm Z-axis travel: 1,660 mm C-axis: 0.001 Turning Length: 1,500 mm Swing diameter over cross slide: 610 mm Swing diameter: 580 mm Spindle Spindle motor power: 30,000 W Spindle speed (min.): 14 rpm Spindle speed (max.): 3,200 rpm Spindle bore: 90 mm Spindle bearing diameter: 130 mm Spindle nose: JIS A2-11 Rapid Traverse Rapid traverse (Z-axis): 20 m/min Rapid traverse (X/Y): 12,000 mm/min Rapid traverse (C): 100 min^-1 Cutting feed rate X/Z/Y: 0.001 - 1,000 mm/rev Tools Tool magazine positions: 32 pos. Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Klsdpfxexqyiko Abgor Turret type: H2 ATC Tool stations: 2 (1x L-Tool / 1x M-Tool) Driven tool stations: stepless Spindle speed – driven tool stations: 40 - 3,000 rpm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Centre taper: MT 5 MACHINE DETAILS CNC Control: OSP 7000L Total power requirement: 53 kVA Dimensions & Weight Dimensions (L x W x H): 5.3 x 3.2 x 3.0 m Machine weight: 18,500 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,204 h, functionality: fully functional, turning length: 1,025 mm, turning diameter: 530 mm, travel distance X-axis: 475 mm, travel distance Z-axis: 1,170 mm, quill stroke: 150 mm, controller model: Okuma OSP-E100L, TECHNICAL DETAILS Distance between centers: 1,000 mm Swing over bed: 550 mm Maximum machining diameter: 530 mm Maximum workpiece length: 1,025 mm Travels X-axis: 475 mm Y-axis: ±80 mm Z-axis: 1,170 mm C-axis: 360° (continuous) B-axis indexing angle: 1° Main spindle Spindle speed: 5,000 rpm Klodpfexvzp Ajx Abgor Spindle nose: JIS A2-6 Taper bore diameter: 62 mm Bearing diameter: 100 mm Sub spindle Spindle speed: 6,000 rpm Spindle nose diameter: 140 mm Taper bore diameter: 43 mm Bearing diameter: 80 mm Milling spindle Speed range: 6,000 rpm Feed rates Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 26 m/min Rapid traverse Z-axis: 40 m/min Automatic Tool Changer (ATC) Number of tools: 84 Maximum tool length: 250 mm Maximum tool diameter: Ø120 mm (with adjacent stations empty) Maximum tool weight: 5 kg MACHINE DETAILS Control: Okuma OSP-U100L Dimensions (L x W x H): 3,820 × 2,645 × 2,900 mm Weight (without tool magazine): 12,500 kg Main switch-on hours: 20,204 h EQUIPMENT Automatic tool change system High-speed M-spindle with coolant supply 360° C-axis for continuous machining Robust B-axis with 1° indexing Precision sub spindle for second machining side Stable turret with ATC system

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 1,670 mm, travel distance Y-axis: 505 mm, travel distance Z-axis: 190 mm, total height: 2,950 mm, total width: 2,960 mm, overall weight: 13,700 kg, product length (max.): 5,110 mm, number of axes: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, Helical Interpolation • Distance between centers: 1500 mm • Max swing diameter over covers: 550 mm • Max turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" Big Bore • Sub-spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with motorized tools Klodpfoy Ddiwex Abgsr • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 divisions • Coolant/pump pressure: 15 bar • Working hours (as provided): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80-position tool magazine, main spindle with C axis, subspindle with C axis, Y-axis on upper slide / milling spindle, HSK 63 interface, infinitely variable B axis as milling spindle, center distance 1500 mm, spindle bore 80 mm, max. swing diameter 550 mm, turning diameter 350 mm, lower turret with 12 stations and live tooling, Interlite compact filter system 900 l, extraction system, spindle run time approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure coolant system, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, Ksdpfx Aboy Atu Tjgjlr subspindle Kitagawa B - 208, spare parts package worth approx. €25,000 included,

Condition: used, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, workpiece weight (max.): 800 kg, Horizontal Machining Center Okuma Millac 550 H (2-pallet system) For sale: high-performance horizontal machining center Okuma Millac 550 H with dual pallet system. Designed for efficient series production, offering high productivity, reduced downtime and full 4th-axis machining capability. Ideal for demanding machining operations requiring precision and repeatability. Technical specifications: Pallet size: 550 mm Travels: X: 800 mm Y: 800 mm Z: 700 mm A-axis: 360° Spindle taper: BT50 Max. spindle speed: 10,000 rpm Tool magazine: 60 tools Kjdpfx Asyw Rlxsbgslr Max. workpiece weight: 800 kg Machine in very good technical condition, ready for operation.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL Ksdpjyf Ncqefx Abgelr 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 126937, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 32, controller manufacturer: Okuma, controller model: P200M-H, rotary table diameter: 400 mm, OKUMA MU-400VA 5-AXIS CNC VERTICAL MACHINING CENTER, FROM AEROSPACE COMPANY, 16" ROTARY PLATEN, 4TH AND 5TH AXIS BUILD IN TRUNION, 15,000 RPM 32 POSITION TOOL CHANGER, OSP P200M-H CNC CONTROL Okuma MU400VA CNC Vertical Machining Centre (2007) Description: Control OSP P200 Table working surface - 15.75", Max table load - 600lbs, X Axis travel - 30", Y Axis travel - 18.11", Z Axis travel - 18.11", A Axis trunnion tilt - +20 to -110deg, B Axis table rotation - 360deg, Table surface to spindle nose - 3.94" - 22.05", Rapids X & Y - 15.75 IPM, Spindle taper - CAT 40, Spindle speeds - 16000 RPM, Spindle Motor - 20HP, Tool magazine capacity - 32 Table Size 15.75" Dia Kjdou Illaspfx Abgelr Table Load Capacity 660 LBS # Axis 5 X-Axis (Longitudinal Travel) 30" Y-Axis (Cross Travel) 18.11" Z-Axis (Vertical Travel) 18.11" A-Axis (Trunnion Tilt Range) (±25°) +20° to -110° C-Axis Table Rotation Positioning 360,000° Max/Min Clearance Table Top to Spindle Nose 22.05" / 3.94" Distance Floor to Table Top 41.34" Rapid Traverse Rate (X, Y, & Z Axis) 1,574 IPM Spindle Horsepower 20 HP Max Spindle Speed 15,000 RPM Spindle Taper MAS BT40 Big plus Coolant Thru Spindle yes Automatic Tool Changer Capacity (ATC) 32 Electrics 220/3/60 Approximate Machine Dimensions 114" x 160" Approximate Machine Height 116" Approximate Machine Weight 17,000 LBS OKUMA OSP P200M-H CNC CONTROL BUILT IN 4TH AND 5TH AXIS 16" DIAMETER TRUNION TABLE 15,000 RPM SPINDLE LASER TOOL SETTER 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE CHIP CONVEYOR

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Kedpfx Asrtrlzjbgolr Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck Kodpoy Drunofx Abgelr 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Kljdpfx Aeyvfhdobger Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: excellent (used), Year of construction: 2021, CNC Lathe Okuma Genos L3000 e MYW Control: OSP-P300LA-e Year of manufacture: 2021 Internal machine no.: 15 Max. machining diameter: 390 mm Swing diameter over cross slide: 260 mm Max. turning length: 500 mm Travel paths: X-axis: 235 mm Z-axis: 450 mm Y-axis: ±50 C-axis: 360° / 0.001° Turret: 12 stations – all driven Spindle speed: 38 - 3,800 rpm Tool holder: VDI 40 Accessories/Equipment: - Chip conveyor Klsdpfoyt E A Nex Abgor - Touch setter - One Touch IGF - Parts catcher - Reinforced coolant system 8 bar - Extraction unit

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Klodpfsh D Anajx Abgor +++++

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Kjdpfx Ajx D S Eksbgjlr Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Kodpfey Ed Ayjx Abgolr Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: good (used), Year of construction: 2015, FOR SALE: OKUMA MILLAC 852VII Vertical Machining Center (2015) Description: High-performance OKUMA CNC vertical machining center for sale, model MILLAC 852VII. Japanese-designed machine, renowned for its exceptional rigidity and surgical precision. Ideally suited for machining complex and heavy prismatic workpieces. Technical Specifications (Source: Manufacturer’s Plate): - Brand: OKUMA Corporation (Made in Japan) - Model: MILLAC 852VII - Year of manufacture: March 2015 (2015.03) - Power supply: 380 V / 3 phase / 50 Hz - Rated power: 44.3 kVA (High-power spindle motor) - Compliance: CE Marked (Certified for the European market) Working Capacities (Standard for model 852VII): - Travels (X / Y / Z): 2,050 mm x 850 mm x 750 mm (Very large capacity) - Table dimensions: 2,200 mm x 850 mm - Maximum table load: 3,000 kg - Spindle speed: Up to 6,000 or 10,000 rpm (depending on configuration) - Spindle taper: BT 50 (High rigidity) - Automatic Tool Changer (ATC): 36 positions (or more, depending on configuration) - Machine weight: approx. 17,500 kg (Ultra-heavy-duty frame) Key features: Kljdpfoyr Id Hsx Abgjr - Recent machine (2015), still complies with current technology standards - Robust box ways for perfect surface finishes

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,100 kg, product length (max.): 3,900 mm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details. • Maintenance contract: Yes • Utilization: 60% • Shifts: 2 • Number of revolvers/magazines: 2 • Priority: 3 • Maximum turning diameter: 360 mm • Spindle configuration: Twin spindle • Control system: OSP-P200 • Tool holder: BMT 60 • Revolver: 12 stations • Spindle bore: approx. 80 mm • Electrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Additional equipment • Bar feeder • OPTIONAL for an additional charge: Approx. 200 tools available, collets, power tools Kedpoy Ddtvsfx Abgjlr Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) Kledpjy Dc Niefx Abgjr • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,500 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 11,000 W, total height: 1,569 mm, overall weight: 3,800 kg, controller manufacturer: OKUMA, controller model: OSP P200 L, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning machine we have for sale. Contact us for further details. • Max swing over covers: 450 mm • Max turning diameter: 200 mm • Max turning length: 380 mm • Spindle nose: ASA A2-6 • Front bearing diameter: 100 mm • Spindle bore: 62 mm • Bar capacity: 50 mm • Rapid traverse (X/Z): 20–25 m/min • Tailstock taper: MT No. 5 • Tailstock quill stroke: 100 mm • Turret type: VDI-30 V12 • Indexing time (1 position): 0.1 sec • OD tool size: 20 x 20 mm • ID tool size: 32 mm Kjdpfx Abjy A I Stogolr • Live tool speed: 6,000 rpm • Live tool power: 4.0 / 1.8 kW • Floor space: 2.081 x 1.550 m • Total power on time: 23,498 hours • Operating time: 6,490 hours • Cutting time: 5,278 hours Additional equipment • Static tool holder kit included Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,200 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 920 mm, spindle motor power: 40,000 W, total height: 2,600 mm, total width: 2,600 mm, overall weight: 13,500 kg, product length (max.): 5,200 mm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two revolvers, offering a total of 22 tool stations, and operates at a spindle speed of 3200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LU35-M horizontal turning machine we have for sale. Contact us for further details. • Maintenance Contract: Yes • Utilization: 85% • Shifts: 2 • Number of Tools: 12 • Number of Revolvers/Magazines: 2 • Maximum Turning Diameter: 550 mm • Control System: OSP-P200L • Revolver A: 12 stations • Revolver B: 10 stations Klodpfx Aoy A Ibhjbgsr • Spindle Bore: 90 mm • Supply Voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Rated Capacity: 53.1 kVA • Full Load Current: 76.7 A • Largest Motor Rating: 134 A • Interrupt Capacity: 10 kA • X-axis travel (A turret): 350 mm (corresponds to max Ø700 mm) • X-axis travel (B turret): 240 mm (corresponds to max Ø480 mm)OPTIONAL for an additional charge: around 100 x tools, Clamping elements, chuck jaw sets, 2-jaw chucks, zero-point clamping systemElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools No Taper Size VDI 50

Condition: ready for operation (used), Year of construction: 2010, operating hours: 32,760 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, total height: 3,300 mm, total width: 5,800 mm, table load: 1,500 kg, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 48, tool weight: 8,000 g, product length (max.): 3,000 mm, number of axes: 3, This 3-axis Okuma MB66-VA was manufactured in 2010. It features a travel of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine has a table size of 1530 x 660 mm and a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the Okuma MB66-VA vertical machining centre we have for sale. Contact us for further details. • Maintenance contract: yes • Condition: About 1.5 years ago, electrical maintenance was carried out; electrical components were partially replaced or cleaned (Guides, linear axes, geometry) • Utilization: 70% • Shifts: 2 • Operating hours: 32,760 h • Control system: OSP-P200M • Table size: 1530 x 660 mm • 4th axis: possible (separately controlled) • Spindle speeds: 8000 / 12000 / 15000 rpm • Magazine capacity: 20 standard (optional 32 or 48) • Number of revolvers/magazines: 1 • Max tool length: 300 mm • Max tool diameter: 125 mm • Rated voltage: 400 V • Number of phases: 3 • Frequency: 50 Hz • Max. power consumption: 42.6 kVA • Total current consumption: 61.5 A • Max. motor current: 112 A • Short-circuit withstand capacity: 15 kA • Voltage: 200 VAC, 50 Hz, 3~ • Control voltage: 24 VDC • Power: 9 kW • Weight: 50 kg Additional equipment • Optional: Zero-point clamping plate for table 1530 x 660 mm for an additional charge Kodpey Ama Nefx Abgjlr • Optional: Approx. 530 tools available for an additional charge Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2000, Technical details: turning diameter 420 mm turning length 650 mm Kljdpfxsyzy Ukj Abgsr control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 rpm travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. Spindle hours: 16.653 hrs. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor