Used Reinforcing Screwing Machine for sale (68,610)

Condition: reconditioned (used), functionality: fully functional, URBAN POWER SCREWDRIVER with automatic SCREW FEEDER Technical data: Air connection: 7 bar Length: 1,400 mm Width: 700 mm Lsdpfx Aex U An Tokqshf Height: 1,800 mm Weight: 100 kg Machine overhauled

Condition: used, Wickman 1-3/4" 6-Spindle SN: 16814 Lhodpfoyzkf Hjx Akqsf Electromagnetic Clutch Stock Reel and Stand Threading Chip Conveyor 6 Cross Slides 4th Pos. Logan Universal Threading Cleaned and Painted Recently taken out of Production Checked under power Can be equipped for your requirements

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total width: 1,321 mm, total length: 1,067 mm, total height: 2,692 mm, input voltage: 240 V, input frequency: 60 Hz, Equipment: documentation/manual, Model NRK-400 In-Line Screw Capping Machine complete with conveyor and guide rails, gripper chains and gripper blocks, four pairs of quills (cap tightening discs), Cap H-26 Hopper/Sorter, cap delivery and application system for 99.8% efficiency. Lodpfsyrkdpjx Akqshf This system can handle both Lug and Screw caps up to 350 caps per minute, depending on product size and condition. The machine can be equipped with steam heating of caps as well as Steam or Gas injection. Compatible with caps ranging from 10-70mm. Include touchscreen controls, power height adjustment, pneumatic "on-the-fly" adjustable clutches, power height adjustable gripper belts, electronically controlled safety switches, Allen-Bradley controls, locking safety interlock switches, container spacing unit, LED safety stack lights, lock out tag out systems.

Condition: new, bending diam. - max. 36.0 mm ST Lhodpsxabntefx Akqef cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,000 mm, total length: 3,650 mm, total height: 1,850 mm, overall weight: 600 kg, 1 Hambi Mattenschneidemaschine TV 25 V, working width 2.50 m, year of manufacture 2000, max. 12 mm single bar or 8 mm double bar, cutting time forward/backward approx. 13/10 sec. Connected load 3 kW. Lhsdpfx Akevxtc Doqjf

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 1984 Ljdpfxoy D Nghe Akqshf 230-600 pieces 2.5–6 mm Blank length: 4–75 mm Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 52 mm, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 8 mm, Flat Die Thread Rolling Machine Ingramatic RP2 V # 408 Year of manufacture: 1984 Output: 200-410 pieces per minute Diameter: 3.5-8 mm Ledpoy D Na Usfx Akqohf Blank length: 6-90 mm Thread length: 52 mm Tool dimensions: 130/115x30x54 Power: 12 kW

Year of construction: 2009, condition: ready for operation (used), Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard and numeric display, manual and automatic operation, foot pedal control, emergency stop button and emergency stop foot pedal, installed power: 5.5kW, length: 6705mm, width: 710mm, height: 1035mm, weight: 1220kg, oil tank capacity: 60l, electrical connection: phases: 3x6mm², ground: 1x6mm², equipment: support frame with control cabinet and hydraulic unit, fixed and movable bending bar, standard spare parts set, foot pedal (1x) + emergency stop foot pedal (1x), documentation available, on-site inspection is possible. Lhjdpoy A Slwjfx Akqef

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Rebar Bender P74 Evo Year of manufacture: 2023 (like new, only used for testing) Programmable with digital display With modular workbench with rollers, 2 meters With Uniq stirrup tool for 2 materials, 16 mm Serial no. 400V-50Hz, 3-phase basic A/C Motor: 7.5 kW CE declaration With preset bending angle via plug-in pins 5 rpm Disc diameter: 720 mm Maximum bush diameter: 400 mm Foot switch Dimensions: 160x116x96 cm Weight: 1600 kg Bending capacity at R = 65 kg/mm2, Round: 60 mm At R = 86 kg/mm2 – round steel: 50 mm Lodpfjy Awzksx Akqohf With bushes, see photos With 1 piece square pin HS-Code: 8462 5900

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 220287, NS60E Nakashimada double-pressure press from 2022, like new, cutting length 95 mm, wire cutting 7 mm Lodpfx Akewiwqxjqehf

Condition: refurbished (used), functionality: fully functional, total width: 800 mm, total length: 1,100 mm, total height: 1,100 mm, bending angle (max.): 360 °, overall weight: 600 kg, We offer this refurbished Peddinghaus Perfekt 32 KA or 32 PA rebar bending machine, year of manufacture unknown. Manufacturer: Peddinghaus Model: Perfekt 32 KA/PA PLA Serial number: 350114786/01 If you have any questions or require further information, please feel free to send us a message or give us a call. Ljdpfx Akjyxc Smoqshf

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Progressive Press SACMA SP260 5 Dies – Like new – Perfect working condition Available for any test at HBR srl. Ljdpowar Efjfx Akqohf Completely overhauled Technical information: Number of dies: 5 Heading tonnage: 800 kN Max cutoff diameter at 500N/mm²: 11.5 mm Max cutoff length: 85 mm Max kickout stroke (die): 65 mm Max kickout stroke (punch): 20 mm Speed: 275 pcs/min Power of main motor: 30 kW Die diameter: 54 mm Die length: 90 mm Punch diameter: 45 mm Net weight: 11,300 kg Gross weight: 13,000 kg We look forward to welcoming you at HBR srl in Calolziocorte (LC)

Condition: ready for operation (used), Numeriek gestuurd Japanse elektronica werkt betrouwbaar, 720 mm snijbreedte, zeer stabiel en zwaar gebouwd (1400 kg), kogelomloop spindel voor spelingsvrij instellen van het zadel. Manual en extra mes ingegrepen. Prijs “as is” geladen op uw transport, excl. eventuele gecertificeerde verpakkingskosten. Lhedpfx Akow R En Hoqjf

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool Lhjdpfxjyb R Nwo Akqjf -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool Lhjdpfxoyb R Nde Akqof -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW Lhodpfx Aksyb R Akoqof -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Lsdpfjwl Iw Uox Akqshf

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Lhjdpju Szucsfx Akqof Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: refurbished (used), Year of construction: 1988, Ingramatic RP1V: M6x75/40 mm. Lsdpfx Ash Riuujkqshf 230-600 ppm. Also available with Washer. Completely overhauled to new. Machine visible in Calolziocorte (LC). OVERHAUL TO CE STANDARD. Overhaul includes: - DISASSEMBLY AND CLEANING OF EACH OF ITS PARTS - REPLACEMENT OF ALL BEARINGS - GRINDING GUIDES OR EVENTUAL REPLACEMENT IF NOT IDONEE - OVERHAUL OF INTRODUCER GROUP - OVERHAUL OF SLIDE ASSEMBLY WITH REPLACEMENT OF LARDONS IN BRONZE - NEW LUBRICATION SYSTEM WITH CONTROL UNIT HYDRAULIC UNIT COMPLETE WITH PUMP, LEVEL SWITCH, PRESSURE SWITCH AND DIVIDERS - NEW WATER PUMP FOR COMB - NEW Ø670 CUP VIBRATOR COMPLETE WITH PANEL VIBRATOR CONTROL AND PHOTOCELL FOR OVERFLOW - REVISED ROLLER EVACUATION UNIT - PROTECTIVE CASING COMPLETE WITH LAMP AND MICRO - SOLENOID VALVE INSTALLATION WITH NEW AIR SYSTEM FOR VIBRATOR AND GUIDES - NEW ELECTRICAL SYSTEM ACCORDING TO CE STANDARDS COMPLETE WITH INVERTER - NEW MOTOR - BELTS REPLACEMENT - PAINTING RAL FROM YOU INDICATED

Year of construction: 1997, condition: excellent (used), 6 head ZALKIN cap screwdriver. Type - CA6 320 NG. - Machine number - 23334. - For 40mm PET bottles. - Capacity - 6000 pcs. I the hour. Year - 1997. Operating hours - 5000 hours. NERD. 6 head ZALKIN cap screwdriver. Type - CA6 320 NG. - Machine number - 23370. - For 28mm plastic bottles. - Capacity - 6000 pcs. I the hour. Year - 1997. Operating hours - 5000 hours. NERD. Lsdpfx Akeixmcdeqehf We have 2 pcs. ZALKIN capsule screw machines in stock. Have more pictures of it we can send over email. Price is per. machine!

Condition: used, Technical details: bending angle max.: 0 - 225 ° operating voltage: 380 V revolutions per minute: 5 -16 U/min Ledpfxex Adbno Akqshf Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm Lhodpjxu Dxqjfx Akqof operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m Lhsdpfx Aeu Ibu Rjkqef transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: ready for operation (used), System uncoils construction steel from coil and cuts it to desired length Straightening and cutting-to-length machine 8/10/12/14 mm Lodpfxsw Trpcs Akqjhf

Year of construction: 1990, condition: ready for operation (used), Max. workpiece diameter: 10-350mm, max. grinding length/ width: 690/ 60mm, clamping length: 950-1330mm, swing angle: -60 to 60°, length: 6200mm, width: 4000mm, height: 2500mm, weight: 9t, with oil filtration system, oil mist extraction and additional accessories. Lhedpfeiph T Hox Akqof