Used Scharringhausen Ht for sale (2,076)

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays Iisdpfx Abswkf Ihegea - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: good (used), Scharringhausen round bending machine Type: UDR-X1-3 Capacity: 3000 x 30 mm Tube length: 3100 mm Upper tube diameter: 470 mm Lower tube diameter: 410 mm Engine power: 70 HP Dimensions: 830x245x295 cm LxWxH Weight: ca 55000 KG Included documentation Ijdpfxsimmb Is Abgjia Movie available!

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. Ijdpfeu Hz Tqsx Abgsia + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning length: 380 mm, turning diameter: 450 mm, spindle bore: 59 mm, rotational speed (max.): 5,000 rpm, controller model: Seicos 40L Multi, TECHNICAL DETAILS Turning diameter: 450 mm Turning length: 380 mm Max. machining diameter: 340 mm Travel X-axis: 215 mm Travel Z-axis: 400 mm Bar capacity: 51 mm Speed range: 30 to 5,000 rpm Drive power - spindle motor: 11 / 7.5 kW Spindle nose: A2-6 Spindle bore: 59 mm Bearing diameter: 100 mm Turret: 16 stations Feed rate: 0.001 to 500 mm/min Rapid traverse X/Z: 30 m/min Shank diameter: 25 x 25 mm Drill shank diameter: 40 mm Iisdpjyxmkasfx Abgoa Tailstock taper: MT 5 Tailstock travel: 300 mm MACHINE DETAILS Control: Seicos 40L Multi Total power requirement: 23 kVA Dimensions & Weight Footprint: approx. 5.5 x 2.8 x 2.2 m Machine weight: approx. 4.6 t EQUIPMENT Documentation Chip conveyor Tailstock Signal lamp Parts discharge Tool setting arm Work area illumination Tool holder

Condition: excellent (used), Year of construction: 2020, Ref:11079 . 2020 Horizon HT-30 Trimmer For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including knives, tools and accessories. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Iodpoyybaxjfx Abgsia Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: good (used), functionality: fully functional, Year of construction: 2001, Neatly used Safan guillotine shear Type HT 310 4 (M Shear) Isdpfx Ajyzgcuobgoia Capacity: 3100 x 4 mm Adjustable backgauge, cutting angle, and blade gap Includes Theis stacking unit

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Weight: 9.800 kg Price: On request Iisdpfx Abjyf Hpzogja - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, total height: 2,000 mm, total length: 3,000 mm, total width: 1,800 mm, Empty weight: 4.000 kg Price: On request Driven tools included Isdpfx Ajwqf I Uebgoia Barfeeder included - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: HT23372E - Drive system: CNC - Control system brand: Yasnac - Power [kW]: 15.0 - Centre height [mm]: 230 - Swing over bed [mm]: 450 - Distance between centres [mm]: 380 - Spindle bore [mm]: 59 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 5000 - Options: Bar feeder, Live tools - Transport dimensions: 3000mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2016, Horizon HT-30C Three-Knife Trimmer, used The Horizon HT-30C is an innovative and efficient three-knife trimmer specifically designed for the small-run and print-on-demand book market. Key Features: - Color touchscreen for easy operation and automatic settings - Fully automated job setup and quick changeover times - Precise cutting quality through servo motor-controlled knife positioning Iijdsyzgb Repfx Abgea - Hydraulically controlled clamping and cutting pressure for mark-free trimming - Capability to continuously process books of varying thickness - Compatible with nearline binding machines like the Horizon BQ-270V for complete book production Technical Specifications: - Untrimmed book format: 148 x 200 mm to 320 x 320 mm - Trimmed book format: 145 x 200 mm to 303 x 303 mm - Cutting thickness: 1 - 51 mm - Production speed: Up to 500 books per hour - Storage capacity: Up to 200 recurring jobs All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), working width: 2,550 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), Guillotine SAFAN - HT 255-8 MACH-ID 9237 Make: SAFAN Type: HT 255-8 Control: ARA TOUCHSCREEN Touchscreen backgauge Maximum sheet thickness: 8mm Max. cutting length: 2550mm Strokes on full length: 19mm Strokes in short 1000 length:40 Cutting angle: 0,5 - 2 Gr° Iiodpfx Aboxdb Eyegsa Length backgauge: 0 - 1000mm Number of down holders: 17 Approach speed: 200mm/sec. Power: 15kW Length: 3400mm Width: 2300mm Height: 2150mm Weight: 8900kg

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 379 h, machine/vehicle number: 2107719, mast type: telescopic, fuel type: electric, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Deutz Weights Iodpjy A Dvzjfx Abgjia Empty weight: 7.930 kg Functional Lifting capacity: 350 kg Working height: 1.600 cm CE mark: yes History Number of owners: 1 Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Emission level: Stage VI / Tier VI Delivery terms: EXW Max. horizontal reach: 1400 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 160 Latest inspection: 2026-04-10 Production country: FR Additional information Please contact Martyn Joosse for more information

Year of construction: 2012, condition: used, functionality: fully functional, For sale are 3 ballistic separators from Hartner. Two of them are still integrated into our production and can be inspected on site. The conversion is scheduled for around the beginning of June 2026. All technical data can be found in the images. If you have any further questions, please feel free to contact us. Ijdpfx Ajyrngusbgsia

Year of construction: 2022, condition: used, Used equipment Year of manufacture: 2022 Features and technical data: - Allows a single operator to easily load panels onto the platform frame and swing them from a vertical to a horizontal position - Suitable for use with panel saws, vertical panel saws, rack storage, or for panel transport between workstations - Swivel frame with two-position locking mechanism (vertical and horizontal) - Table height can be adjusted to the desired working level via foot-operated hydraulic pump - The design with a smooth scissor-lift mechanism ensures the platform is raised and lowered in a perfectly parallel manner - Sturdy roller supports on the lower rail and multiple all-direction rollers for ergonomic and easy handling - Counterweight on the lower frame provides secure positioning and maximum stability when moving the table - Operator pedal for the workstation table is easily accessible at all times - Easy to maneuver thanks to four swivel castors with a diameter of 125 mm - Two castors equipped with parking brakes - Swivel frame can be mounted and dismounted on the platform base frame quickly and easily Iisdpfjyy Tp Sox Abgoa - Complies with EN 1570-1 safety standards - Load capacity: 300 kg - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm | Length: 1500 mm - Roller diameter: 125 mm - Dimensions: 1200 x 740 x 400 mm - Weight: approx. 80 kg - Swivel frame weight: 10 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Electrohydraulic drive Vertical press cylinders: 3 units Stroke of vertical cylinders: approx. 130 mm Vertical cylinders adjustable via perforated grid Horizontal press cylinders: 2 units Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Central pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg Ijdpfx Abeyx Nubogoia The above information is provided subject to change until the machine arrives at our warehouse. Availability: short-term Location: 63934 Röllbach

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Iiodpfey Avh Njx Abgea Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: excellent (used), Year of construction: 2018, HT 45 SM2Y / SIEMENS - with driven tools + Y-axis CNC turning machine for complete machining of turned/milled components with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on the main and sub-spindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Sub-spindle - 15 kW Speed range: Main spindle 0 - 7,000 rpm Sub-spindle 0 - 7,000 rpm Spindle connection (DIN 55026): Isdowvlvvspfx Abgjia Main spindle: KK 5 (max. bar capacity Ø 45mm) Sub-spindle: KK5 Y-axis: • Travel range: +40/-30mm • Rapid traverse: 15m/min Includes: • Hollow clamping cylinder on the main spindle • Draw tube for main and sub-spindle • Mechanical spindle brake (main/sub-spindle) • Part ejector and flushing through the sub-spindle • Sinumerik 840D-sl / OPERATE control o SHOPTURN dialog programming o USB interface o Network drive / Ethernet o 15" TFT color monitor o 3D simulation o and much more • 2x 12-station tool turrets VDI 25 radial version with directional logic for up to 2x 12 driven tool stations! Swivel speed adjustable via feed switch! Performance data: o Max. 4kW at 2080 rpm o Constant torque 16 Nm o Speed range 0-6000 rpm o C-axis for main and sub-spindle o TRANSMIT software for easy C-axis programming • Chip conveyor with programmable ejection height of 1100mm (Type "hinged belt") • Coolant system integrated into chip conveyor 2 pcs. high-pressure pumps, 14 bar each 2 pcs. flushing pumps, 3.7 bar each • Hydraulic unit • Machine light • Documentation Includes: DE6400 1 pc Control language German S3Z580 1 pc 22-inch multitouch operating unit HT45 X3Z160 1 pc Tool monitoring Siem. 840Dsl X3Z690 1 pc SHOPTURN/MILL expansion kit 840DSL/828D X3Z710 1 pc 4-axis turning/balance 840DSL/828 S3Z20S 1 pc Glass scale X1 SIEMENS S3Z21S 1 pc Glass scale Y1 SIEMENS S3Z23S 1 pc Glass scale X2 SIEMENS X1Z140 1 pc Loader interface A8, S2, S3, S4, S6, R2, R6, R9PM S30593 1 pc Surcharge for flat chip conveyor S3Z610 1 pc Tool measurement HT45 S4Z140 1 pc Coolant gun S3Z160 1 pc Cooling unit HT45 S3Z010 1 pc Oil mist separator MT45/HT45/E45 S3Y300 1 pc Band filter 600l+conveyor HT45 S30605 1 pc Preparation HT45 sub-spindle unloading S30595 1 pc Robot interface HT45 S30596 1 pc Interface to measuring station S30597 1 pc Interface for unloading unit S30598 1 pc Wireless measuring probe Renishaw S30599 1 pc Tool layout by Emco 990717 1 pc Loading system IRCO ILS-RBL-8008 990718 1 pc Unloading system IRCO ILS-REX-8008 ..... Year: 2018 Machine No. S3A182001

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Iiodpfxjxz Ab Re Abgoa Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: used, This listing is for the Infors HT Multitron Shaker The unit is in full working condition and ready for immediate use Advanced incubator shaker designed for reliable and uniform mixing with precise temperature and humidity control. Ideal for research and biotech labs requiring consistent results in cell culture and fermentation processes. Transparency Report and Technical Audit: Iiedpfx Aoyywp Nebgea • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), functionality: fully functional, empty load weight: 7,800 kg, Year of construction: 2007, operating hours: 4,170 h, Equipment: air conditioning, cabin, Hamm 3307 HT Vio single drum compactor, year 2007 with only 4,170 operating hours, in good condition, immediately ready for use, weight 7,800 kg. Transport and delivery possible. We also prepare customs/export documents. Viewing by appointment, also possible on weekends. Iisdpjykktzjfx Abgja

Condition: good (used), Year of construction: 2003, You are bidding here on: a branded folding machine from a very reputable and well-known manufacturer – Schechtl. Device specifications: - Schechtl KSV folding machine – reinforced build - Rail bends precisely - Angle indicator Iiodpeym Am Esfx Abgja - Bending length just over 2m - Sheet thickness: 1.5 mm for steel, more for aluminium, zinc, etc. – up to 2 mm - Standard rail – radius for aluminium or zinc is also optionally available - Foot pedal closer - Optional: depth stop, 500 mm, additional rails - Schechtl guillotine shear - Usable length: 2m - Sheet thickness: 1.25 mm (more for aluminium) - Depth stop: 750 mm - Optional storage / tilting table (after cutting, the table tilts the cut material at an angle) - Extendable sheet support - Additional accessories and tools available on request, such as tube bars, holders, and tool sets, etc. - Matching mechanical and electric guillotine shears in stock – please inquire for set pricing; we can configure it for you as required. Important: Optionally, you can find and purchase many machines and accessories for sheet metal and steel processing in our shop, such as various rails, depth stops, folding machines, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines, and a variety of accessory parts (hemming devices, round rollers for gutter production, back gauges, etc.), as well as additional hand tools and spare parts from top manufacturers – all in stock. Invoice with VAT shown. Free loading available – weight approx. 950 kg and 700 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by buyer (or by a shipping agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from motorways A3 and A81. Article numbers: Folding Machine KSV, Guillotine Shear HT.

Condition: good (used), I offer here a set from Schechtl Folding bench KS with foot closer and guillotine shear HT 150 Both have a capacity of 1.5mm iron - aluminum significantly more Iiedpfx Aeudbzmebgea Working length a little over 1.5m Plate shears with depth stop guillotine shears with high quality front support with blade (optional spare blade available)

Condition: refurbished (used), Year of construction: 2007, Completely overhauled Haas Multigrind HT grinding machine available from Q2 / 2026. Designed for resharpening hobbing cutters, worm wheel cutters, cutting rotors, notching cutters, industrial knives, circular knives, shaper wheels, skiving tools, deep hole drills, and other workpieces/components. Control: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (indexing device): 360° SK50 C-axis (rotary table): 270° X3-axis electrically operated with tailstock Grinding spindle: HSK80 Dressing unit Tool changer: 10-position magazine disc Coolant system: Turbo Separator Extraction unit: LTA CO2 extinguishing system Iodpfx Asx Tr H Nebgjia Additional accessories available ex works Custom software solutions available on request Pre-acceptance at factory and commissioning, training, and final acceptance at customer site Financing/leasing options available Modification requests possible

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with angle adjustment Specialized drilling machine for staircase construction, window manufacturing, and universal applications, featuring pneumatic height adjustment. Angled doweling and spindle boring for balusters can be easily performed thanks to the rotatable drilling unit. Motor with pole-changing capability, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via convenient handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can swivel 65° to the left and right Pneumatic adjustment of the working height, doweling on two levels without repositioning Desired drilling heights can be set for each level using a handwheel and digital counter; switchover is then performed pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, positionable at the front and rear of the table 2 swivel workpiece supports 2 side stops, also usable as front supports Mobile base Extraction port 80mm 4 used but good drill bits: 9, 12, 16, 19mm Ijdpfx Absyfta Tjgoia Minor paint touch-ups; excellent condition—see original photos A used swivel slot mortising machine in this condition is very rarely available. CE mark User manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this seller."

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Iedpfx Absyx U Hijgeia Sub spindle Drive power (100/40% ED): 17/22 kW Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation

Condition: good (used), Guillotine Shear HT 200 Capacity: 1.25 mm steel – aluminum and more Cutting length: slightly over 2 m Back gauge Extendable front support Iisdoyknd Ropfx Abgea Folding Machine KS – Capacity: 1 mm steel – more for aluminum (up to 1.5 mm) Bending length: slightly over 2 m Foot closer Optional: back gauge or Beading device Roller sets and additional rails Sold according to §25a of the German VAT Act Machines are in proper condition and immediately operational Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various rails, back gauges – everything related to sheet metal and steel processing, including folding machines, guillotine shears, drill presses, slip rollers, slitting and profiling machines - accessories (beading devices, round rollers for gutter manufacturing, rear gauge, etc.), as well as other hand tools and spare parts from many top manufacturers. Please feel free to contact me with any questions. You will receive an invoice according to §25a UStG (the VAT is included in the amount – margin scheme taxation). Free loading available – weight approx. 750 kg and 650 kg. Inspection and test run are possible and encouraged after making a telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from motorways A3 and A81. Item numbers: Folding Machine KS and HT 260107 260108