Used See Masson Nfa for sale (6,664)

Condition: good (used), Line to produce Chinese and Japanese style chilli oils, has been producing Chinese style chilli oils for Chinese supermarkets, restaurants and cash and carry's. #chillioil Nwjdpfjrzblbjx Akcef

Condition: new, Year of construction: 2024, 20-Foot Container Nodpfeg S Aibjx Akcewf NEW - ONE WAY with lock box and forklift pockets Year of manufacture 2025

Condition: used, 70 linear meter painting chain, with clutch system for a load of many products in confined space (see video) 70-meter painting line with friction system for loading multiple products in a small space (see video) Nwsdpoivur Aofx Akcsf

Condition: ready for operation (used), 20-ft. Container Condition: Used, Cargo worthy, 12 months CSC, Wind and watertight Free on Truck Munich Depot/Terminal We can also offer you the transport directly to your location. Nsdeg S Adhspfx Akcjwf

Condition: new, Year of construction: 2025, container length: 20 ft, NEW CONTAINER / ONE WAY / Year of manufacture 2025/ 2026 Nwsdpfx Aowut Nbjkcef +Lock box +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015

Condition: new, Year of construction: 2025, container length: 20 ft, NEW CONTAINER / ONE WAY / Year of manufacture 2025/ 2026 20-Foot +Lock box +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015 Nwodpfx Aewut Nzjkcof

Condition: new, Year of construction: 2025, NEW with fork lift pockets with lock box YOM 2025 several RAL colors Nwjdpog S Acrofx Akcsf

Condition: ready for operation (used), 20-ft. Container used in Cargo worthy condition, 12 months valid CSC free on truck Depot in DUISBURG Nsdpfjg S Alwox Akcowf

Condition: good (used), Various measurement cards & racks from NI available, see listing: To be sold completely or in parts Photos are exemplary NI PXI-1045 189105K-01L 2 units NI PXI-2569 100 SPST Relay Module NI PXI-6528 Isolated Digital I/O NI PXI-4072 6 1/2 digit FlexDMM NI PXI-2532 512-Crosspoint Matrix 2 units NI PXI-6251 M Series Multifunction DAQ NI PXI-8331 MXI-4 2 units NI PXI-6232 M Series Multifunction DAQ 10 units NI PXI-1031 90871D-01 Rev1.1 NI PXI-8196 Embedded Contr 191435B-712 without Expresscard NI PXI-6229 M Series Multif DAQ 191332B-11 191334A-11 NI PCI-6527 185681D-01 Nwedpfx Akowpgy Aecof NI PCI-GPIB IEEE488.2 188513E-01L SCB-68 182469-01 terminal board TBX-68 83420 DAQ Termination Board 3 units SCXI-1331 184268C-01 Rev. 3.1 2 units Cable 188841B-02 SH37F-SH37M-2 10 units See also my other test and measuring equipment. We also buy.

Condition: good (used), Set of various equipment viewable at the address shown, after telephone contact Nedpfxetv Da Ne Akcowf

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Nwjdpfx Aox Dnb Ujkcof Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Nwedou Th D Rjpfx Akcof Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Nsdpfsx A U Ncox Akcewf Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: new, Year of construction: 2026, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Nwjdpfxjy Drhus Akcsf Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: new, Year of construction: 2026, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Nwodpfjy Drc Ssx Akcsf Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: good (used), Scope of delivery includes: Used impact protection barriers Clear width: 1,550 mm Designed for: single row racking Consisting of: 01x C-profile, used Colour: yellow Profile dimensions: 380 x 50 x 25|20 mm Material thickness: 3.0 mm Weight: 130.58 kg per piece Length: 1,050 mm 02x impact protection corners, used Nsdpfx Akey Avxnscowf Colour: yellow Height: 400 mm Total width: 290 mm Total depth: 185 mm Leg dimensions: 75 x 160 x 125 mm Weight: 10.07 kg per piece Number of drill holes: 3 Drill hole diameter: 13 mm Profile opening: 55 mm Material thickness: 5.0 mm Your contact persons at our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information regarding the item: This item is only offered for collection. Transport or shipping beyond this is subject to additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Condition: used, Dough sheeter Seewer Rondo Nwjdpfx Ajyzz Huekcsf Seewer AG Burgdorf/Switzerland Model no.: SFS 611 C Machine no.: C0A011108

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm distance table - lower edge spindle: 525 mm Nwjdpfow Rv Taex Akcsf grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: reconditioned (used), functionality: fully functional, conveyor belt width: 635 mm, total width: 2,210 mm, total length: 1,175 mm, total height: 1,380 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 05/2027, electrical fuse: 16 A, year of last overhaul: 2026, opening width: 45 mm, working width: 635 mm, type of input current: three-phase, Dough Sheeting Machine Kombi Rondo TOP Model: SKO 611 for all types of dough – for sheeting and laminating Nwsdpfxstrqtno Akcjf with program control, LED display robust engineering mobile dough sheeter Connection: 400V, 16A-CEE plug Dimensions: 2210 x 1175 x 1383 mm (W x D x H) Refurbished used machine with warranty & service Options: Maintenance contract Service package Delivery service Spare parts box Training & commissioning We have more dough sheeters in stock!

Condition: excellent (used), - Model: SS064 Nodpfjwxwmfex Akcjwf - Serial number: 4900 - Lowering: manual or semi-automatic control - Belt width: 600 mm - Belt length: 1200 mm - 2 foldable belts - Forward / reverse control - Emergency stop - Mobile on wheels - Voltage: 400V

Condition: excellent (used), - Brand: SEEWER RONDO - Model: Motostar 3000 SFM859H - Serial number: B8161306 - Dimensions: 5900x1400x1600 mm - Roller diameter: 146 mm - Roller length: 850 mm - Roller opening: 0.5 – 65 mm - Roller speed: variable, 50–100 m/min. - Roller reduction: motorized, 30 automatic programs - Feed belt speed: 50 to 100% of roller speed - Discharge belt speed: 90 to 100% of roller speed - Guard opening: max. 125 mm - Material: stainless steel - Electric control system Nwedpfxjwxwl Io Akcof - Direction of rotation control - Automatic winder - Year of manufacture: 1998 - Made in Switzerland - Overhauled equipment: the equipment is prepared upon order; pick-up and return times are agreed at that moment (please request the price after overhaul)

Condition: new, Year of construction: 2025, empty load weight: 2,100 kg, total length: 6,000 mm, total height: 2,400 mm, 20-Foot NEW Container ONE WAY - YOM 2025 Easy open Door / 3 door handles Fork lift pockets Lock box Nwodpsrgpicsfx Akcef

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device Nwedpfx Aoyxy S Rskcsf - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: excellent (used), Well-maintained Hammelmann HDP 42, 970 bar and 16.5 litres, year of manufacture 2012. Nedpfexgvhnsx Akcewf

Condition: reconditioned (used), Hammelmann HDP, 064 with 2000 bar and 14 l in excellent condition. Nwodoy Anwpjpfx Akcsf