Flatbed truck

MAN ÖAF 20-320 G1 KAT 6x6 Palfinger Kran

Condition: ready for operation (used), Year of construction: 2014, Number of decks: 1, total number of zones: 12, number of pairs of regenerative zones: 3, number of pasteurising zones: 5, number of separate cooling zones: 1, number of tunnel modules (without infeed and outfeed module): 12, pump side: right, belt load: 152.6 kg/m², max. belt load: 260kg/m², throughput capacity at 0.15l, 0.25l: 65,000 cans/h, with documentation, on-site inspection is possible. Kodpfx Ajrn Ta Usd Eend

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Type: CD 305G X-path: 400 mm Knjdpfoqgcimsx Ad Eed Y-path: 300 mm X-path: 220 mm bed: 515 x 640 mm Year of construction: 2002 Hours: 16333 Including documentation and parameters Dimensions: 245x200x203 cm LxWxH

Condition: used, machine/vehicle number: 0001210226, pattern table size: 236 x 460 mm working table size: 200 x 500 mm working area longitudinal: 300 mm working area cross: 160 mm spindle turning speed range: 1900 - 15000 rpm milling proportion: 1 : 1 105x165/1 : 5 44 x 80 mm space needed: 800 x 900 x 1250 mm Knjdebv S Elopfx Ad Eed weight: 340 kg

Condition: excellent (used), Wine tanks and for other liquid: - 2080 lit - 3110 lit - 4290 lit - 5150 lit - 7520 lit - 9390 lit - 10650 lit - 11750 lit - 12520 lit - 18020 lit Knodpfx Adjtzz H Se Eod

Condition: used, mileage: 37,279 km, power: 96 kW (130.52 HP), first registration: 12/1979, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, machine/vehicle number: 1065, Equipment: all wheel drive, trailer coupling, TUV and AU are made NEW!!! The Unimog is in a very good condition, and equipped with: PTO front (2 speeds), fast power take-off, engine brake, front and rear axle lock, buy also without body rere other Mercedes vehicles are still in my offer e my vehicles are with data and prices on my homepage r info???Call 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Kedjqx Svmspfx Ad Eend

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min Kedsv A Sqhopfx Ad Esnd spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar Knedou Idffjpfx Ad Eed control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet. Knedpfx Ajh Dwr Usd Ejd Addendum to the measurement report!

Condition: good (used), Robot Knsdpjbrhtdofx Ad Eed Manfacturer: Staeubli Type: RX170

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm Kedsu Rt Nxjpfx Ad Esnd z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.