Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
1 used internal circular grinding machine with plan grinding device Type: E450I 1000 Built in 1978 delivered in 1979 Max workpiece headstock and spindle distance: 1421 mm Grinding depth: 407 mm Tip height: 180 mm Max schleifbarer hole diameter: 300 mm Speed range: 32-500 rpm Dvsqam Workpiece weight: 100 kg Machine weight: 4100 kg Length: 4100mm Width: 2400mm Height: 1492mm Machine card see more data under documents more
4
internal diameter:315 mm grinding depth:500 mm swing diameter:500/600 mm swivel range of workhead:30 ° metric taper of workspindle:60 ° max. mass of work-piece ground in centres:320 kg net weight:5100 kg gross weight:5900 kg connected load:10,5 kW table speed -stepless-:0,5-8 m/min max. bore diameter to be ground:315 mm smallest grindable bore dia.:30 mm grinding depth max.:500 mm stroke of the table:800 mm centre height:315 mm max. distance bet work spindle to grinding stock:1350 mm hole throug... more
4
rotary table diameter 1000 mm boring diameter 900 mm grinding depth 350 mm workpiece height without magnet 450 mm K0jn8lmpe turning speed range - grinding spindle 1100-1550 U/min speeds of additional milling spindle 1455-2900 U/min turning speed range - workpiece 0-60 U/min rotary table tiltable 3 Grad rapid traverse grinding heads horizontal 1000 mm/min grinding wheel dia. x width 400 x 63 mm electrics - voltage/frequency 380/50 V/Hz total power requirement 35 kW weight of the machine ca. 15 t... more
2
internal diameter:150 mm 08kb0hycj grinding depth:300 mm swing diameter:360 mm centre height:180 mm grinding head swivelling:180 Grad grinding head quick motion:200 mm table feed:0,1 - 7 m/min total power requirement:8 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:3 x 1,8 x 1,6 m with face grinding attachment with internal grinding attachment coolant attachment more
6
Grinding diameter: 0.8-80 mm Grinding length: 120 mm Tip height: 58.8 mm Speed range: 30,000 rpm Lining: Bison diameter 125 mm - 3-jaw Grinding spindle housing: Bore diameter 60 mm Workpiece RPM 300, 600, 900 RPM Accuracy 0.003 mm M8tsh Total power: 5 kW Machine weight: 1250 kg Dimensions (W x D x H): 1.67 x 1.3 x, 1,705 m mechanically complete overhaul at the factory, like new condition Accessories: grinding spindle retainer with a diameter of 40 mm bore Work light more
5
High performance grinding spindle, internal grinding machine, grinding Interior, internal grinding spindle 2mee9prfx Grinding spindle for lathe -elektrisch operated -max speed 6900 RPM Recording M42 x 1.5 mm Dimensions 600/390/H355 mm Weight 64 kg more
6
Internal circular grinding machine for internal grinding machine grinding internal grinding surface grinding external grinding Bahmüller SIP X Built in 1976 Fully functional Ftstfjxym Pictures see data sheet. Location of the machine: 76661 Philippsburg Machine can be visited at any time and is in perfect condition. (see pictures below) We love to hear from you. more
5
internal diameter:100 mm grinding depth:160 mm swing diameter:300/450 mm max. outer diameter:300/450 mm weight of the machine ca.:2900 kg Rcxzs3owf 100 % before loading warranty: none one used internal grinding machine, make: Jotes, type: SOJ 10M, year of produktion 1986 more
4
110 Voumard CNC grinding machine Jugike Original condition TECHNICAL data BEARBEITUNGSKAPAZITAeT max inner diameter: 150 [mm] max outer diameter: 160 [mm] max length: 80 [mm] STUeCKHALTER HEADSTOCK Max. diameter: 250 [mm] max length: 160 [mm] Max load to 100 mm: 50 [kg] max speed: 1500 [U/min] power: 2 [kW] transverse stroke X 220 [mm]: resolution: 0,0002 [mm] Max feed: 20 000 [mm/min] wheel-holder turret ORIENTABLE by CNC max action RADIUS: 400 [mm] orientation of each position:-10 to + ... more
6
internal diameter 300 mm grinding depth 500 mm swing diameter 380 mm turning speeds 4580 U/min coolant 2 bar total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Qnnbzw29i more


Internal a...
every day

New machines via email!

Be informed!
2
Reconditioned Studer, S120cnc production internal grinder with integrated Studer handling system QuickeasyChange Cpsnmjxq Tip height 125 mm / Fanuc 21i-TB control integrated control for handling system Feed workpiece headstock MK4 with Forkardt hollow clamping cylinder Dittel milliseconds Anschliff detection Z1 - axis with Fischer MFM 1090 or 10120 internal grinding spindle more details on request! more
5
internal diameter:100 mm grinding depth:120 mm swing diameter:260 - 400 mm grinding table stroke:min 2 mm 8scr73bqr center height over grinding table:235 mm center height over workpiece table:130 mm spindle passage:30 mm Grinding table feed:0 - 20 m/min total power requirement:10 kW weight of the machine ca.:3 t dimensions of the machine ca.: m more
5
internal diameter mm grinding depth mm swing diameter mm ----- WORKING RANGE CYLINDRICAL GRINDING - workpiece weight between centers (max) 50 kg WORKING RANGE EXTERNAL GRINDING - grinding diameter (max) 75 mm - grinding diameter (min) 0.5 mm - grinding length 100 mm TABLE -CYLINDRICAL GRINDING- - longitudinal travel 340 mm - longitudinal traverse velocity (min) 0 mm/min - longitudinal traverse velocity (max... more
1
internal diameter:100 mm grinding depth:120 mm swing diameter:260 - 400 mm total power requirement:10 kW weight of the machine ca.:3,8 t dimensions of the machine ca.: m Rcznex29s more
5
internal diameter unbkt. mm grinding depth unbkt. mm swing diameter unbtk. mm total power requirement kW weight of the machine ca. t Yv2ijhkbw dimensions of the machine ca. m more
internal diameter 20 - 300 mm grinding depth 300 mm swing diameter 350 (500) mm Control VOUMARD grinding slide stroke 650 mm solution in X-, Y- und Z-axis 0,001 mm x-axis 150 mm spindle head - swivable -32 / + 2 spindle passage 50 mm turning speed range - workpiece spindle 900 U/min turning speed range - grinding spindle 42000 U/min total power requirement 40 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m 3uhmj3c more
5
High performance grinding spindle, internal grinding, internal grinding attachment, internal grinding spindle br / br / -Schleifspindel for lathe br / -Electric operated br / -max speed 5000 U / min br / recording cone br / -dimensions 600/750 / H450 mm br / -weight 120 kg W77h7pdxn more
3
Innenrundschleifmaschine Voumard Baujahr 1999 Steuerung Fanuc 18T Spannung 3x400V AC (380-415) Minimaler Druck 5 bars Technische Daten X Achse Verfahrweg 200mm Aufloesung 0.0005mm Bnwr0lj Maximale Geschwindigkeit 20m mn Z Achse Verfahrweg 500mm Aufloesung 0.0005mm Eilgang 20 m mn Technische Daten der Werkstueckspindel 400 Spindelnase 5 Max. Kapazitaet - Durchgang mit Abdeckung, maximaler Durchmesser 450mm - Durchgang ohne Abdeckung, maximaler Durchmesser 680mm Empfohlene Kapazitaet fuer... more
5
internal diameter 40 (autom. Beschickung) mm grinding depth 40 (autom. Beschickung) mm swing diameter 150 mm workpiece length - max. 120 mm travel -x axis 120 mm travel -z axis 120 mm y-axis + 90 / - 90 ° total power requirement 20 kW weight of the machine ca. 2900 kg dimensions of the machine ca. 2200*1500*2100 m INTERNAL GRINDING MACHINE Control Fanuc O GC Technical specifications: Numerical spindle revolver - Position 1 programmable from 0°-10° /+30° - Position 2 programmable from 180°-10°... more
4
internal diameter 140 mm clamping length max. 250 mm sanding belt length 160 mm Ps3wye weight of the machine ca. 2 t dimensions of the machine ca. 3 x 2 x 2 m more
6
internal diameter 150 mm grinding depth 250 mm swing diameter 350 mm distance spindle /table 245 mm workpiece spindle - bore 44 mm spindle speeds 0-400 mm speeds of internal spindle 2.700 - 5.400 U/min face grinding slide 4.500 U/min Mtw2fk total power requirement 670 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,80 x 2,60 x 2,40 m more
4
Grinding diameter 100 mm max. grinding depth at max. grinding table stroke 300 mm = 120 550 mm = 230 mm more
3
internal diameter 100 mm grinding depth 120 mm swing diameter mm total power requirement 6 kW Tefcgdoca weight of the machine ca. 3 t dimensions of the machine ca. 2,6 x 1,7 x 2,0 m more
6
internal diameter 460 mm Fjd3gxcfi grinding depth 500 mm swing diameter 520 mm clamping length 700 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
5
Maximum: Grinding diameter: 250 mm Maximum: Grinding Length: 1000 mm Swing diameter: 400 mm Total power requirement : 10 kw Maximum: workpiece weight: 100 kg Spindle turning speed range: 4.600 - 31.000rpm 7cm2yosbf longitudinal feed of the table:600 mm Machine weight: 3560 kg more
5
External cylindrical grinding machine, grinding, internal circular grinding machine delivery as is as seen -Max shaft diameter 370 mm Bazavdifjx -Max grinding length 270 mm SIA diameter mm Dimensions 1600/830/H1450 mm Weight 924 kg more
5
internal diameter:250 mm grinding depth:200 mm max. workpiece diameter:260 mm Baz82s7klc main drive motor:10 kW turning speed range - grinding spindle:10.000 1/min tool taper:HSK 63 total power requirement:30 kW weight of the machine ca.:7 t dimensions of the machine ca.:3,2 x 1,5 x 2,7 m 2011 partially overhauled (headstock and feed drive Z-axis) more
5
internal diameter:xxx mm grinding depth:xxx mm swing diameter:xxx mm workpiece weight max.:60 kg grinding Table ( Z1-Axis ) inernal grinding: max. feed:15 m/min Min. automatically programable travel:0,0001 mm max. travel:400 mm resolution:0,0001 mm Infeed-Table (X1-Axis) Internal Grinding: max. feed:15 (diameter related) m/min Min. automatically programable travel:0,0001 mm max. travel :200 mm Xbt9w8w72 resolution :0,0001 mm grinding Table ( Z1-Axis ) external grinding: max. feed:15m/min. m... more
2
internal diameter 50 mm O7ohymnb grinding depth 200 mm swing diameter mm total power requirement 3,5 kW weight of the machine ca. 1200 kg dimensions of the machine ca. m more
3
internal grinding diameter 0 mm 0ueazubi grinding depth 0 mm min. dia. 0 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
4
grinding diameter:300 mm grinding length:500 mm centre height:250 mm swing dia.:450 (im Wasserschutz) mm swing dia.:500 (ohne Wasserschutz) mm max. bore diameter to be ground:300 mm stroke of the table: mm grinding depth:ca. 500 mm grinding head swivelling:25 Grad taper angle:50 Grad max. dist. workpiece spdl. - grinding spdl.:1350 mm table speed -stepless-:0,1-8 m/min grinding wheel motor:3,3 kW hydraulic motor:1,5 kW coolant pump:0,12 kW dimensions:3500x1600 mm Frqjhv8z3 weight of the machine... more
2
internal diameter: max. 265 mm swing diameter: 300 mm grinding depth: max. 150 mm internal grinding diameter: 265 mm control: Sienumerik 840D spindle revolutions per minute : 5 - 1890 (stufenlos) U/min spindle head: DIN 55026 A5 stroke of the table: z- Axis: 250 mm rapid traverse Z-axis: table 20 m/min total power requirement: 13 kW weight approx.: 4300 kg dimension machine [...]: 3,0 x 2,3 x 1,95 m dimensions electric cabinet LxWxH: 1,2 x 0,5 x 1,9 m Internal Grinding Machine Technical specif... more
6
internal diameter 150 mm Jb9dkodrq grinding depth 300 mm swing diameter 300 mm distance spindle - grinder max. 850 mm min. dia. 10 mm swivability of the grinding spindle head +/- 90 ° spindle speeds 8 / 19-480 UpM taper in spindle headstock MK 4 table movement stepless 0,1 - 7 m / Min. total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 3,02 x 1,7 x 1,75 m Condition: ready for operation Electric 380 Volt chuck Forkhardt F 250 Grinding spindle 2 x... more
5
Grinding stone, grinding pin for internal grinding-1Spannzangenaufnahme-receiving cone 53 mm grinding points, different-diameter outer diameter of 1-40 mm is only completely sold-Weight 6 kg Lh99n more
4
internal diameter 120 mm grinding depth 200 mm swing diameter mm total power requirement 4 kW weight of the machine ca. t dimensions of the machine ca. m Grinding diameter, internal, max., approx.3 - 120mm Grinding depth, approx.200mm Height of centres above rotating workpiece slide132mm Max. swing Ø in front of rotating workpiece slide, approx.450mm Work spindle admission40mm Table stroke, max. (Z axis)480mm Workpiece cross adjustment (X axis)50mm Turret head cross adjustment (U axis)50... more
3
internal diameter:150 mm grinding depth:200 mm stroke of the table:425 mm max. swing dia.:250 / 420 mm bore:80 mm table speed -stepless-:0,5 - 10 m/min Y7mi0uewn workpiece turning speeds:125/176/246/350 U/min spindle speed::17000 U/min total power requirement:2,2 / 0,5 / 0,9 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,40 x 1,20 x 1,45 m more
2
schleifbarer inside Æ 1 100 mm Grinding depth max. approx. 120 mm Ba7lttpi29 Peak height of the workpiece spindle stick 175 / 300 mm Workpiece clamping Æ in blade 250 mm maximum work-piece length approx. 500 mm Table hub (loop slides) min/max 2 300 mm Table speed infinitely variable 0 20 m / min Tefcgdoca Number table strokes max. 300 RPM Displacement of the workpiece spindle head along 00 mm Swivel d. of workpiece spindle stick-30 to + 90 ° degree Of the grinding spindle stick... more
1
boring diameter:1-100 mm Prwpay min. workpiece diameter:360 mm max. workpiece diameter:500 mm workpiece length - max.:1000 mm weight of the machine ca.:4,5 t more
5
internal diameter:300 mm grinding depth:160 mm swing diameter:350 mm Ti8u2nef spindle bore:70 mm longitudinal feed:2 / 400 mm spindle taper:120 mm total power requirement:15 kW weight of the machine ca.:8,5 t dimensions of the machine ca.: m more
6
11 units in stock precision internal grinding OVERBECK ZETTO 30 Built in 1971 clamping length of max 200 mm Clamping diameter of 100 mm 2vihjkfny Grinding diameter 0.8 to 80 mm,. Grinding length of 120 mm Dimensions: 1250 x 800 x 1300 mm more
5
internal diameter 100 mm grinding depth 230 mm swing diameter mm total power requirement 18 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H9h8fqajc more
5
Innenschleifmaschine SCHAUDT MIKROSA BWF Ceres 330 Baujahr 2000 Battuecyje Zustand Gebrauchtmaschine, gut Schleifdurchmesser bis zu 300 mm Schleiftiefen bis zu 200 mm innen und 100 mm aussen ***Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!*** more
6
Grinding diameter: 5-200 mm Grinding length: 500 mm Tip height: 180 mm Grinding depth: 250 mm Grinding spindle retainer: 90 mm Speed range: 3,600-40,000 rpm Total capacity: 9-15 kW Batu0skobf Machine weight: 2700 kg Dimensions (W x D x H): 3.2 x 1.6 x 1.7 m good working condition more
1
internal diameter:50 mm grinding depth:75 mm swing diameter:320 mm weight of the machine ca.:2700 kg dimensions of the machine ca.:2,4 x 2,2 m : : : : : : : : : : Fb3hy3p : : : 3-jaw chuck: magnet chuck: oil mist lubrication: internal grinding extractor: 100 % before loading warranty: none used internal grinding machine, make REINECKER, type ISA-5, year of production 1978 more
4
Internal grinding machine Jung C8 hydraulic Chuck with cylindrical grinding machine! C2d8zd7y The machine is in top condition, can be tested at the customer's site! -maximum loop length 100 mm -maximum diameter 70mm more
5
Reconditioned InnenschleifmaschineBaujahr 1987 overhauled 2013 Bdb2xaiu more
1
internal diameter 800 mm grinding depth 0 mm swing diameter 1100 mm total power requirement 20 kW Rckgyy8ms weight of the machine ca. 10 t dimensions of the machine ca. m more
4
Working range ID = 0.5-100, OD = 0-120, Rexroth control, 1 x HF internal grinding spindle mounted, 1 x HF internal grinding spindle as new in the case, Absolent Ventilation unit, The machine was used as an experimental machine for electrochemical machining, because of this Medium, a relatively easily removable rust formation has arisen. However, essential parts are unaffected and the machine is only returned because the experiments are not continued. Original price about € 450,000, -. M8hbt more
5
Motorised Internal spindle used on a Sielemann RB800 Babsj82lt9 more
2
internal diameter:315 mm grinding depth:500 mm swing diameter:500/600 mm max. bore diameter to be ground:315 mm smallest grindable bore dia.:30 mm grinding depth max.:500 mm stroke of the table:800 mm centre height:315 mm max. distance bet work spindle to grinding stock:1350 mm swivel range of workhead:30 ° hole through spindle:42 mm Lkqed workpiece spindle stepless:50-450 U/min metric taper of workspindle:60 ° corss traverse of workhead:190 mm max. mass of work-piece ground in centres:320 kg t... more


Internal a...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close