Face Grinding Machine

REINECKER IBS-20

Condition: excellent (used), Tacchella Macchine grinding machine, type 40LR, in very good condition. Specifications: Pjdpfxsivg E He Afusrb Longitudinal travel, X-axis: 400 mm Cross travel, Y-axis: 250 mm Clearance between worktable and spindle axis: 375 mm Wheel speed: 3000/6000 rpm Wheel dimension: 150x20 mm Weight: 800 kg

Condition: used, Year of construction: 1998, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg with Turbo Separator, loading unit, latest-generation balancing and dressing unit and various accessories * Prodpfx Afjzgw I Neujb

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Pedpfxozdf Hvo Afusrb Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system - Extraction unit

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm Prodpfx Ajzbc Hhefueb max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg Prsdpfxjd Rxw Hs Afusb

Condition: used, Year of construction: 1996, Technical details: grinding diameter: 1,5 - 75 mm grinding wheel diameter: 400 mm grinding wheel width: 160 mm work stroke: 0 - 1 mm working feed: stufenlos/ continous mm/min grinding wheel speeds: 1300 U/min control for program: Num 1020 GC total power requirement: 14 kW weight of the machine ca.: 3,8 t dimensions of machine: 3,0x2,2x2,2 m dimensions electric cabinet LxWxH: 1,5x0,4x2,0 m CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. - Workpiece removal automatically via rail (its function or operation is not known to WMW AG) - grinding wheel with reshaping device, speed = 1300 rpm. - regulating grinding wheel with reshaping device, infeed angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system accessories: various grinding and regulating wheels on request The machine is operating in manual mode! The control is in the Catalan language and none of our employees can control the machine or understand the language. Pjdou Ngyzopfx Afuerb *

Year of construction: 2002, condition: not inspected (used), Robot Pedogu U Itspfx Afuorb no control panel + connection cables Used, untested robot. No technical documentation available. Not tested.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Prsdpfx Afsy E I Hieusb Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, Fanuc Oi-TD control 3-jaw chuck diameter 250mm 12-fold revolver tail stock chip conveyor The machine has only 4051 switch-on hours Technische Daten: / technical details Schwingdurchmesser / rotary diameter 650 mm Drehdurchmesser / turning diameter 400 mm Drehlänge / turning length 650 mm X-Weg / X-travel 230 mm Z-Weg / Z-travel 650 mm Podpfx Afevi Haqsusrb max. Drehzahl / max. spindle speed 4500 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 11/15 kW Gewicht ca. / weight ca. 5400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Manufacturer: HERMLE Model: C 40 U dynamic Machine type: 5-axis universal CNC machining center Year of construction: 2006 Machine No.: 1XXXX Control system: SIEMENS SINUMERIK 840 D Condition: extremely good / exceptionally well-maintained CE marking: available Original HERMLE documentation: available Travel ranges X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm Dynamic feed drive Rapid traverse X/Y/Z: 60 m/min Acceleration: 10 m/s² Feed force: 8,500 N Dynamic feed spindles X-axis: Ø 40 / 20 mm Y-axis: Ø 50 / 40 mm Z-axis: Ø 40 / 30 mm Main spindle Spindle speed: 18,000 rpm Tool interface: HSK A63 Internal coolant supply: 80 bar Compressed air through the spindle center Tool magazine Tool positions: 38 Tool interface: HSK A63 Automatic tool changer NC swivel rotary table Table type: SRT 800 Table diameter: Ø 800 mm Maximum table load: 1,400 kg A-axis total range: 135° A-axis: minus 110° to plus 25° C-axis: 360° 6-fold rotary through-feed Parallel T-slots: 14 H7 Measuring system / Accuracy Direct linear measuring system X/Y/Z Resolution: 0.1 µm Input unit: 0.1 µm Display increment: 0.1 µm Position tolerance Tp X/Y/Z according to VDI/DGQ 3441: 0.008 mm RENISHAW measuring probe 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS Coolant and chip disposal system Internal coolant supply: 80 bar KNOLL high-pressure coolant system KNOLL filter system Scraper conveyor Chip flushing gun Chip cart: 200 liters Compressed air through the spindle center Oil mist extraction KNOLL KF 200/1000 Manufacturer: KNOLL Maschinenbau Type: KF 200/1000 Year of construction: 2006 KNOLL 850 K 1 Year of construction: 2006 Equipment NC swivel rotary table Ø 800 mm RENISHAW measuring probe Direct linear measuring systems X/Y/Z 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS 6-fold rotary through-feed Internal coolant supply 80 bar KNOLL coolant and filter system Scraper conveyor for chips Chip cart 200 liters Compressed air through the spindle center Chip flushing gun Oil mist extraction Manual cabinet door Manual cabinet roof Laminated safety glass panes Machine lighting German documentation Original HERMLE machine documents CE declaration of conformity NAS acceptance test in customer's plant Electrical data Operating voltage: 400 V / 3 phases Mains frequency: 50 Hz Control voltage: 24 V DC Total rated current: 63 A Total connected power: 43 kVA Connection cable cross-section: 16 mm² Minimum short-circuit strength of the power grid: 2.50 MVA IKZ electrical data Connection: 400 V / 3 PH / 50 Hz Control voltage: 24 V DC Fusing: 50 A Cable cross-section: 10 mm² Podpfxsz E Axho Afujrb Connected load: max. 16.6 kVA Dimensions / Weight Net weight according to nameplate: 10,500 kg Transport weight standard machine: approx. 10,300 kg Transport length: approx. 3,154 mm Transport width: approx. 2,354 mm Transport height standard: approx. 2,892 mm Transport height with Z motor removed: approx. 2,743 mm Transport height with Z motor and energy chain removed: approx. 2,640 mm Control cabinet cooling Manufacturer: RITTAL Type: Blue e+ SK 3185830 Year of construction / Production date: 2025 Cooling capacity: 1.60 kW Power consumption: 0.70 kW Temperature range: minus 20 to plus 60 °C Protection class internal circuit: IP55 Condition The machine is in extremely good and exceptionally well-maintained condition. Extensive original documentation and machine configuration available.