Working platform (self-propelled)

Manitou 100VJR Teleskopmastbühne Elektro 10m Arbeitshöhe

Condition: used, fuel type: electric, color: red, overall weight: 2,650 kg, Year of construction: 2017, machine/vehicle number: 2460348, Equipment: UVV, Manitou 100 VJR telescopic boom lift Technical data: *Working height 9.90 m *Platform height 7.90 m *Load capacity 200 kg *Total width 0.99 m *Total length 2.82 m *Total height 1.99 m *Weight 2650 kg Equipment: *Proportional control lever *Drive at max. lift possible *Acoustic warning signal and indicator light for inclined position and overload *Integrated charger *Manual emergency lowering *Negative brake *Acoustic warning device in the workman basket *Operating hours counter *Battery charge status *Crane eyes *Integrated diagnostic aid *Non-marking tires *Work basket with perforated plate floor *CAN - BUS technology *Toolbox in work basket Optionally we offer the following *UVV New Nodpfx Aboqyak Ujkoli *Removal of our decals *Painting and decaling on customer request *New batteries *Warranty *New service *Delivery within Germany

Condition: new, Year of construction: 2025, Genie GS3232 NEXT GENERATION E-Drive scissor lift with hydraulic outriggers, new, used - demo machines available Nsdpfxorqfn Ue Abkeli

Condition: used, fuel type: electric, color: red, overall weight: 2,650 kg, Year of construction: 2018, machine/vehicle number: 2460608, Equipment: UVV, Technical Data - Year of construction: 2018 - Working height: 9.90 m - Platform height: 7.90 m - Platform dimensions (LxW): 0.90 x 0.75 m - Load capacity: 200 kg - Total weight: 2650 kg - Drive: Electric 2WD Nljdeqyalgspfx Abkoi - UVV: new functional, general signs of wear, vertical telescopic mast, swivel range 350°, integrated charger, batteries 250 Ah, gradeability 25%

Condition: used, fuel type: electric, color: red, overall weight: 2,650 kg, Year of construction: 2016, machine/vehicle number: 2460038, Equipment: UVV, Technical Data Nedpfx Asqyak Rsbksli - Year of construction: 2017 - Working height: 9.90 m - Platform height: 7.90 m - Platform dimensions (LxW): 0.90 x 0.75 m - Load capacity: 200 kg - Total weight: 2650 kg - Drive: Electric 2WD - UVV: new functional, general signs of wear, vertical telescopic mast, swivel range 350°, integrated charger, batteries 250 Ah, gradeability 25%

Condition: used, Year of construction: 1980, Technical details: grinding diameter: 380 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock Njdswy Ri Nopfx Abkoli with coolant tank *

Condition: new, Fully automatic palletizing system HYDRA+ cobot palletizer: 👉 up to 20 kg payload (optionally up to 25 kg) and 👉 up to 2 m palletizing height Depending on customer requirements, we offer different configurations of our palletising system. 💶 For full price details of the Cobot palletiser with 20 kg payload, please refer to the detailed price package (see attached PDF in EN 👉 8136716-2.pdf). The palletizing system includes: → Collaborative robot DOOSAN ROBOTICS Cobot H2017 for up to 20 kg payload; (optionally adaptable up to 25 kg payload with DOOSAN H2515) → Robot base and operating elements → Pallet frame for 2 Euro pallets → FJM suction pad for handling packages, construction as required → innovative palletizer software → individual design according to customer requirements → palletizing system, firmware and software up to date ❗ For logistical reasons, we only deliver within the DACH regions and countries bordering Austria. HYDRA cobot palletiser by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH 2021 Nsdpfx Aji Emapebkeli

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Nledpfxod R Er Ds Abkei Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: used, Year of construction: 2017, Overview  This 200L brewhouse package was manufactured mostly in 2017 by German company Speidel. It is equipped with a 200-liter brew kettle, a 500-liter boiler and multiple fermentation tanks, making it ideal for small-scale commercial brewing. The equipment is still installed and available for inspection. The system is for sale because the current owner upgraded to a larger brewhouse. Technical data  Capacity: 200L per brew (Braumeister) Brewing system: Electric brewing kettle with integrated control Heating: Electric Material: Stainless steel Suitable for: Craft brewing / small batch brewing Condition: In very good shape, currently in use Scope of Delivery  1 × Braumeister 200L brew kettle | Speidel 2 × Malt pipes 1 × Plate cooler 4 × 240L fermentation tanks | Speidel 2 × 625L fermentation tanks | Speidel 1 × 500L boiling kettle | Speidel Nlodpfjwfh Eljx Abkoi

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 158 h, arm reach: 1,300 mm, Hello, Nlodpfx Aep E T N Aebkoi we are selling a demonstration robot UR10e, was used for a concept study but was discarded.

Condition: used, Technical details: weight of the machine approx.: 179 kg space requirements of the machine approx.: 0,75 x 0,335 x 0,340 m Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm Nlodpfxeu Nkw Ro Abkei *