Rough terrain forklift

Manitou M30-4

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 7,766 h, load capacity: 3,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,040 mm, power: 70 kW (95.17 HP), empty load weight: 6,226 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,100 mm, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 0 - 20% Description: Front forklift - all-terrain forklift MANITOU M30-4T - - - 3-ton lifting capacity - - - side shifter - - - TRIXPLEX free-lift mast - - - overall height 3.04m - - - lifting height 5.50m - - - year of manufacture 2011 - - - 7766 operating hours according to meter - - - 4-cylinder PERKINS TURBO diesel engine, 95 hp - - - pneumatic front tires approximately 90%, rear 10% - - - large front tires - - - good off-road capability - - - 4-speed torque converter transmission - - - work lights front and rear - - - full cab with heating - - - mechanical hydraulic system - - - all-wheel drive can be engaged - - - length without forks 3.80m - - width 2.10m - - overall height 3.04m - - good condition Side shifter, 3rd valve, work light rear, work light front, heater, full cab. Hnjdpfxoztt Tne Almor

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Yunnei EUR5, total height: 2,650 mm, total length: 3,900 mm, total width: 2,080 mm, Equipment: air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, 4x4 all terrain forklift CE EUR5 Diesel engine EUR5 Yunnei DEF30CZEF5 74 kW 100 km 5T lifting capacity forklift weight 7200kg triplex mast 5m lifting height pneumatic tires air-conditioned cabin 1220mm fork length additional bucket included additional 2000mm forks the fork is NEW CE certyficate PayPal payment available Hjdpfxsuzivvj Almenr

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,020 mm, total length: 4,800 mm, · Bedienertyp Sitzen · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 747 mm Hnsdpfx Ajztgmbolmer · Vorderachslast (beladen) / Hinterachslast (beladen) 7490 kg / 1475 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 2155 kg / 3810 kg · Vorderspur 1520 mm · Abstand zwischen den Hinterrädern 1630 mm · Sitzhöhe 1426 mm · Gabelträger DIN 15173 A/B 3A · Gangbreite für Palette 1000 x 1200 quer 6180 mm · Gangbreite für Palette 800 x 1200 längs 6180 mm · Wenderadius 4030 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.60 m/s / 0.60 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Zugkraft / Zugkraft (unbeladen) 6290 daN / 4250 daN · Festellbremse Haudraulik · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Motorleistung gemäß ISO 1585 65 kW · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 185 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 78 dB

Condition: used, Year of construction: 2022, load capacity: 3,000 kg, lifting height: 5,510 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Drive Diesel Year built 2022 Lifting height (mm) 5,510 Lifting weight (kg) 3,000 Hnedpfx Aoztggnslmsr

Condition: good (used), functionality: fully functional, first registration: 07/2015, fuel type: diesel, overall weight: 7,500 kg, tire condition: 75 %, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 8,650 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2015, Equipment: ABS, central locking, crane, fog lights, onboard computer, === MAIN SPECIFICATIONS === Year: 2015 Hours: 5510 h Working height: 30 m Max. horizontal outreach: 19.5 m Platform capacity: 350 kg Truck type: MAN Number of axles: 2 Truck drive: 4x2 Transmission: Manual Cabin: Single Engine power: — Fuel type: Diesel Platform dimensions (L x W): 1.6 m working cage Platform rotation: Yes (80° + 80°) Boom type: Telescopic / articulated combination Stabilisers: Yes – hydraulic outriggers CE certification: Yes Total vehicle weight: 7,500 kg === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection possible upon request. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) Reliable truck mounted access platform from the well-known manufacturer Palfinger. The Palfinger P300 KS offers a maximum working height of 30 meters and a horizontal outreach of up to 19.5 meters, making it ideal for maintenance, installation, construction and infrastructure work. The machine is equipped with hydraulic outriggers, automatic cage levelling and a rotating aluminium working platform, ensuring stable and safe operation in various working environments. All machines are fully inspected, CE-certified and ready for immediate use. === DELIVERY === Hodpfx Aljyr Nkzemonr Crane loading available upon request for smooth transportation. Flexible shipping options tailored to your destination and logistics preferences. All transports handled professionally by the logistics team of Collé Rental & Sales.

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,535 mm, total length: 4,800 mm, All-terrain forklift Hjdpfeztgahjx Almjnr Manitou M 30-4 Drive Diesel Year built 2025 Lifting height (mm) 5,535 Lifting weight (kg) 3,000

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,550 mm, total length: 4,800 mm, All-terrain forklift Hnsdpfx Aloztgabsmjr Manitou M 30-4 Drive Diesel Year built 2025 Lifting height (mm) 5,550 Lifting weight (kg) 3,000

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Hjdpfxot Ac Efs Almenr Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Year of construction: 2022, load capacity: 3,000 kg, lifting height: 5,510 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Drive Diesel Year built 2022 Hnedpfx Aeztf Sislmer Lifting height (mm) 5,510 Lifting weight (kg) 3,000

Condition: used, Year of construction: 2016, fuel type: diesel, Lifting capacity: 3.000 kg Hnodezui Hmopfx Almsr Please contact Gebrauchtgeräte Center for more information

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 130P - C Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Power: 130 tons (1300kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector Hnodpfx Alsnyh Siemsr * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,380 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, construction height: 3,055 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 5,600 kg, total length: 3,490 mm, drive type: Diesel, construction width: 1,920 mm, Rough-terrain forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Hjdsw Uamxjpfx Almenr Technical condition: very good Front tires type: pneumatic Front tires condition: 80 - 100% Rear tires type: pneumatic Rear tires condition: 80 - 100% Side shift, 3rd valve,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,100 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, construction height: 3,055 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 5,600 kg, total length: 3,490 mm, drive type: Diesel, construction width: 1,920 mm, Rough terrain forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire condition: 60 - 80% 3rd valve, 4th valve, Hodpfeym Enrex Almjnr

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide Hsdpfxswvgbgo Almenr - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling - Automatic part blow-off - Rosler BF 40/40 dust collection system - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: used, functionality: fully functional, machine/vehicle number: Serie 3-E2, Year of construction: 2008, operating hours: 5,200 h, load capacity: 3,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, power: 61 kW (82.94 HP), fork length: 1,200 mm, empty load weight: 6,600 kg, total length: 3,635 mm, drive type: Diesel, construction width: 2,105 mm, All-terrain forklift Chassis number: Series 3-E2 Load center: 500 Mast type: Standard Speed class: 20 Hjdpfx Alszi Hukomenr Condition: Ready for use and fully functional Technical condition: Good Front tires Type: Pneumatic Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Condition: 60 - 80% Sideshift, 3rd valve,