Lifting appliances and conveyors

MBM HBA 8

Year of construction: 1997, condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min sawing of pipes in steel and greycast iron  with wall thickness of up to 22 mm  milling of pipes in steel and grey cast iron with wall thickness of up to 15 mm cutting speed 35 m / min Nwsdeghy Azjpfx Akqek compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm Nwedpfouf Rw Tex Akqok - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: used, Gullotine Wohlenberg WP 115 MCS-2 TV with Light guard and air bed. Schneidmaschine / Gullotine Wohlenberg WP 115 MCS-2 TV Baujahr / Year 1994 - Serial-No. 3563-009 Schnittbreite / Cutting width max. 1150mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include Nodpfxsyc Ul Es Akqewk Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 55846, Used strapping machines from Mosca type RO-TR500-3. Nsdpfxsvzquvs Akqswk

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Platform: 11,000/3,000/H1,100 mm -Load capacity: 100 tons -Steering: possible on both sides -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm Nwedpfx Aord Aclekqek -Number of wheels: 32 pieces -Wheel size: 646/200-480 -Overall dimensions: 12,300/3,000/H1,100 mm -Weight: 12960 kg -Handover: in its current condition as inspected -Note: Check the condition of the wheels

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargo trailers, roll trailers, cargo trailers -Heavy-duty transport wagon: industrial trailer Nodpfx Aol Ab D Hekqjwk -Platform: 17470/2545/H850 mm -Load capacity: approx. 85 t -Tires: Solid rubber -Quantity: 1 piece available -Empty weight: 8000 kg

Condition: used, Year of construction: 2010, IMT W20 T2 Vertical Lathe Control: Fanuc 32i-Model A Turning Diameter: 542 mm Chuck: Schunk 500 160 Njdpfx Aswb Svgjkqewk Turning Length: 450 mm Maximum Swing Diameter: 640 mm Maximum Speed (rpm): 2500 Spindle Power: 29.5 HP X-Axis Travel: 450 mm Z-Axis Travel: 450 mm X-Axis Rapid Traverse: 15,000 mm/min Z-Axis Rapid Traverse: 15,000 mm/min Number of Turning Tools: 6

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Wohlenberg 38FC Three-knife cutter Maximum uncut size: 315 × 410 mm Maximum cut size: 300 × 380 mm Minimum cut size: 50 × 80 mm Stack height (press height): max. 100 mm Mechanical speed: up to 1,080 cycles/hour Njdpfezgx Nbjx Akqowk

Condition: new, first registration: 07/2025, loading space length: 6,000 mm, loading space width: 2,200 mm, color: orange, Year of construction: 2026, operation weight: 30,000 kg, TPW 30 AL - PA with all-wheel steering and oscillating axles Dimensions: Length: 6000 mm Nwsdpfx Akshbq Izjqsk Width: 2200 mm Tires: Solid rubber tires 425x305, 2x150 twin tires, 8 tires total Drawbar with 40 mm tow hitch and height adjustment with fail-safe mechanism Transport platform: 40 mm Douglas fir wood Paint: RAL 2000 Stop blocks on each long side, 4 pieces each, see cargo securing

Condition: used, functionality: unexamined, Wohlenberg 115 with cut computer and light barrier Nwedpfx Ajzua N Eskqjk The machine cuts and the programs run, but the dimension display has an offset (parallel) from the actual dimension (probably simply adjustable). New Keyence light grid, 2024. Loading costs for forklift rental are extra (approx. 350 - 500). Items are loaded onto the truck loose.