Crushing plant

MFL STE 100-65

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm Dcsdpfxezi Duhj Ak Aop - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, Jaw crusher, used Manufacturer: Skoda Dcsdpfx Aksyluqye Aop Type: 1017 / 1200 x 900 Feed opening: 1000 x 700 mm Discharge size: 130-250 mm Electric motor: 130 kW Feed hopper Conveyor belt with transfer hopper

Condition: excellent (used), functionality: fully functional, operating hours: 6,223 h, CASE CX290B Crawler Excavator Kawasaki Hydraulics, Isuzu Engine Technical specifications: - Engine: Isuzu AH-6HK1X (6-cylinder, turbocharged, common rail) - Engine power: approx. 154 kW (209 HP) at 1800 rpm - Operating weight: approx. 29,100 kg - 30,000 kg (depending on equipment) - Hydraulic system: Variable displacement piston pumps (Kawasaki) ensuring smooth combined movements - Maximum digging reach: approx. 10.5 - 10.7 m - Maximum digging depth: approx. 7.1 m Dodpfx Akjygy Aws Aecp - Bucket capacity: standard approx. 1.2 - 1.6 m³ - Hours: Original 6,223 operating hours – well-maintained machine, regularly serviced, hour meter fully functional and legible Advantages of the CX290B model: - Hydraulic quick coupler: Fast and efficient attachment change without leaving the cab - Full hydraulic circuit: Equipped with additional lines on the boom for hammer, shear, or grapple operation - Cab comfort: Spacious cab with excellent visibility and air conditioning - Durability: Heavy Duty undercarriage designed for tough working conditions - Electronics: Control system offering multiple operating modes (H, S, E) for optimized fuel consumption Condition: Machine as shown in photos; tracks and undercarriage in good condition. Ready for testing on site.

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Dsdpfjxfvh Ssx Ak Aecp

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 2623-43, working width: 1,100 mm, sheet thickness steel (max.): 100 mm, Edge Processing Machine Timesavers 32 WRBW - Demonstration machine, year of manufacture 2025 - Vacuum table for processing mixed materials - Automatic table cleaning - Deburring unit - Edge rounding unit - Finishing unit - Can be offered as a complete system with extraction - Installation and training by in-house service personnel Dcjdpjytr Hnjfx Ak Aop

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Machine is without gearbox. Dcsdpfxoyt Iawe Ak Ajp

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3370 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms Dodpfsxab I Tjx Ak Aecp - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: used, Year of construction: 2021, We are offering these used DME 40HL 40HL insulated fermentation tanks, manufactured in 2021. Dodpjza Twnofx Ak Ascp Manufacturer: DME Model: 40HL Date of manufacture: 06/23/2021 Serial number: B5715-30-03 Year of manufacture: 2021 Condition: used Type: 40HL insulated fermentation tanks If you have any questions or would like more information, please feel free to send us a message or call us. Price per unit.

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Dcodpfxsqmi Iro Ak Aep Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: used, Year of construction: 2026, Slitting line 1500 x 6, made by GUIDA Line composition: - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls - Titling table - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Dcsdpfxsymciae Ak Ajp Working Direction: From left to right Power supply tension: 380/50 Hz