Miele WS/5141-EL

Miele 14KG WS/5141-EL

Condition: good (used), functionality: fully functional, Conveyor belt length: approx. 28 m Discharge height: approx. 10 m Feed hopper capacity: approx. 10 m³ with adjustable dosing conveyor belt 2 transport conveyor belts (one flexible) on a 3-axle chassis Powered by an ENDRESS 45 kVA generator Hjdpov Scaxefx Amiel

Condition: excellent (used), Year of construction: 1999, Steam generator: VEA mod.UNIVEX 25G H13 + BWT water treatment and reverse osmosis system - Capacity: 1325kW - Steam generation: 2500 kg/h - Max pressure: 13 bar Steam boiler, Steam generator, Industrial boiler, Water treatment, Oil burner, Steam system, Energy industry, Operator-free system, Thermal power - working temperature: 195*C - Burner: WEISHAUPT (year of production 2016) - Year of production: 1999 - Complete documentation - Complete, modern water treatment: BWT Hodpfxoucvi Nj Amijl

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Hodpfx Ajvf E Avsmijl Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2019, Electrically heated rapid steam generator. The water level in the feed water tank is regulated by a float. A pump transports the feed water into the boiler, where the water level is regulated by an electronic control system. When a certain water level is reached, the resistance heating elements switch on automatically. The heating output can be adjusted in three stages on the housing. Additional title: electrically heated steam supply Saturated steam capacity: 82 kg/h Heating output 1-, 2- or 3-stage: 20+20+20 kW Heating area: 0,566 m2 Mox. operating pressure: 8 bar Power: 60 kW Current: 86.6 A Voltage: 400 V Frequency: 50 Hz Length: 1074 mm Width: 770 mm Height: 956 mm Hjdjxf D Igjpfx Amijl Weight: 340 kg Base construction: auf Füßen stehend, in Gehäuse Features: electric resistance heating; feed water vessel and desludging tank in the housing

Condition: ready for operation (used), Drum Screen Terra Select. 50 mm screen perforation Hsdpovnmcvofx Amiel

Condition: ready for operation (used), Year of construction: 2020, A complete low-pressure steam boiler system Viessmann is available. 1) Condensate unit Viessmann TWA-T LS 0,9, max. operating pressure: 0.1bar, test pressure: 0.2bar, max. temperature: 110°C, water volume: 400l. 2) Dosing system Schweizer-Chemie EMP 2.5l E60. 3) Steam generator Viessmann Vitoplex 100-LS, year of manufacture: 2019, nominal heat output: 460kW, steam capacity: 700kg/h, water volume: 960l, operating pressure: 1bar, test pressure: 4.8bar. 4) Control cabinet Viessmann Vitocontrol HS. 5) Steam accumulator/pressure vessel Viessmann RBS/1 1000 So. steam, volume shell space/tube space: 990l/17l, max. operating overpressure shell space/tube space: 10bar/2.5bar, max. operating temperature shell space/tube space: 95°C/130°C, test pressure shell space/tube space: 13bar/4bar. Documentation available. An on-site inspection is possible. Hsdpex Uq Uusfx Amijl

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Hodpfsqvlvmjx Amijl Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low-noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, SHAFTS DEDICATED FOR HAMMEL VB 850. ALSO AVAILABLE WITH SIDE COMBS PROTECHNIKA is a company with 21 years of history and, since the start of its operations, has been engaged in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. By implementing automated welding processes and developing our own manufacturing technology, we have minimized production times while maintaining consistent, high quality. Grinding shafts are a series-produced product, which, among other advantages, enables us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 Hjdjx Hhfzopfx Amisl - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 welder qualifications - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are of paramount importance to us, because their satisfaction is our success!

Condition: excellent (used), Technical condition: very good Hjdpjt Dltbefx Amiol Visual appearance: very good Price: On request Please contact Ferdinand Pater for more information

Condition: new, Year of construction: 2012, Heating: Electric Dimensions (W x D x H): 2134 x 598 x 1092 mm Roller diameter: Ø 330 mm (13 inches) Ironing width: 1504 mm (59.2 inches) Hourly output: 34 kg/h Evaporation rate: 17 liters/h Roller speed: 1 to 6 m/min Moist air flow rate: 350 m³/h Noise level: 55 dB(A) Thermal leakage rate: 3% Foot threading type: M10 Weight: 447 kg Packaging volume: 2 m³ Electric power: 20.7 kW Hedpfx Amew El Azjijl Voltage: 400 V / 29.1 A / 3ph + N / 50/60 Hz Year of manufacture: 2012