used, top condition
make ALKO
type Jet 160
year of construction 1995
machine no. 46/95
clean air unit / vacuum
GS dust-tested
CE type-tested
Cdu2s2i0wj
Motor 2,2 kW
Connection diameter 160 mm
Pressure pa. 1570
Air output 1770 m³/h
Filling barrels L x W 850 x 580 mm
Filter cleaning manual
Space requirement approx. LxWxH 1600 x 700 x 2200 mm
Weight approx. 350 kg
Storage location 97447 Gerolzhofen, free on truck, unpacked
Delivery in as-is condition as viewed,
without guarantee and warranty
Type: Mobil-Jet 100 HD Year of construction: 2001 Condition: very good, used, tested - Volume flow 770 m³/h - Pressure 1572 Pa - Motor 2,2 kW - Connection dm. 100 mm - Available from kw 10-2023!
D0b0hy
Device with compressed air cleaning in galvanized construction
Suction port:160 mm
Motor power:2,2 kW/ 400 V/ 50Hz
Nominal volume flow:1850 m3/h
Minimum flow rate:1448 m3/h
Filter area: 8,25 m2
chip collection volume: 280 liters
max. sound pressure level 73 dB (A)
weight: approx. 195 kg
Dimensions (L x W x H): 1645 x 673 x 2185 mm
Hbukpqirm
Location: Ex stock 54634 Bitburg
- immediately available -
The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system.
It is delivered as a plug-in paint mist extraction system.
Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz
Bzw0cohmih
Fan speed 960 / 1.430 RPM
capacity 3.000 / 6.800 m3/h
dimension...
used, good condition
Make AL-KO
Type Mobil Jet 200
Year of construction 1996
Machine no. 938585
GS dust tested
CE type tested
Motor 3kW
Connection diameter 200 mm
Pressing pa. 2500
Air performance 2715 m³/h
Filling bins 2 pieces
filter cleaning pneum.
New price approx. EUR 10,900.00
Djfpvyasw
Space requirement approx. 1950 mm x 830 mm x 2204 mm
Weight approx. 300 kg
Storage location 97447 Gerolzhofen, freely loaded, unpacked
Handover in the current condition as seen,
without guarantee and guar...
Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET
Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device.
Ideally suited for all kinds of dry dust in various technological processes.
It is possible to replace the filter bags according to the requirements and purpose.
Year of manufacture 1998
5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum
Inlet diameter 250 mm
Ca...
Filter area 1 x 1 m,
Motor 1,5 kW (400 Volt),
volume flow 4600 m³/h,
negative pressure 500 Pa,
baffle plate and lateral adjustable doors,
suction connection D = 300 mm with throttle valve,
dimensions 1897 x 1405 x 1144 mm
immediately available from Seevetal,
subject to prior sale,
plus freight and packing
Chtooonsgx
- NEW -
- Compact design, space-saving
- Powerful, high suction power, low operating costs
- Easy to maintain, long filter service life
- Universally applicable, variable accessories
- High flexibility
- Mobile design
- Extraction technology with front panel system
- mobile
Technical specifications:
- Intake manifold 2000x1000 mm
- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm
- Flow rate 6800 m³/h
- Usable negative pressure 500 Pa
- Filter surface 2.0 m²
- Filter cleaning none
...
Advantages
-Compact design, space-saving
-Powerful, high extraction capacity, low operating costs
-Easy to maintain, long filter service life
-Universally applicable, variable accessories
-High flexibility
-Mobile design
-Suction technology with front plate system
Technical data:
Nominal motor power: 0,75 kW / 2,1 kW
Motor speed: 960 / 1430 min
Air volume: 6 800 m³ / h
Filter surface: 2 m² ( 2 x 1 mtr.)
Connection diameter 300 mm with throttle valve
Dimensions (W / H / D) in mm: 2971 x 1405 x 12...
Listing
3
Tacenska cesta 25, 1210 Ljubljana - Šentvid, Slovenija
We are selling a used extraction unit from the renowned German manufacturer AL-KO.
Technical characteristics:
- inlet opening diameter 300 mm
- motor power 7,5 kW, 400 V
- air flow 6,000 m3/h
- nominal air flow: 5,089 m3/h
- generated vacuum (with 4 m extraction hose) 2,587 Pa
- filter area 35.0m2 - EXTENDED FILTERS
- filter cleaning method: compressed air
- dust emission: standard H3, 0.1mg/m3
- material type: polyester filter with surface treatment (bia certified) category C
- dimensions (L X...
- NEW -
- Compact design, space-saving
- Powerful, high suction power, low operating costs
- Easy to maintain, long filter service life
- Universally applicable, variable accessories
- High flexibility
- Mobile design
- Extraction technology with front panel system
- mobile
Technical specifications:
- Intake manifold 1000x1000 mm
- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm
- Flow rate 4600 m³/h
- Usable negative pressure 500 Pa
- Filter surface 1.0 m²
- Filter cleaning none
- ...
Paint mist extraction AL-KO colour Jet 1
Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,.
Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up
In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and
Throttle body.
Compact space-saving design of sheet steel
Chassis with wheels
Indirect exhaust near the ground
Fully assembled
With connecting cable and phase change Setup
Adjustable side panels
Optimized spray mist recording by pate...
belt width ± 1.000 mm
cooking length : 2 x 6.700 mm
thermal fluid heating
lift system to open hood for cleaning and inspection
Dodrbn9xa
automated clean in place system (CIP)
Main function
The high performance radial ventilators at the clean air side in the filter housing do create a vacuum, which sucks (or blows) chips and dust into the filter room, where a preseparation takes place at the bounce wall. The precleaned row air flows from outside to inside through the filter hoses, which hang in the filter room; by this, the dust is separated at the surface of the hoses. In winter, the clean air flows via a silencer back into the production hall, and in summer the air ...
filter
intermediate filter/sparging filter
vacuum unit
suitable for container feeding
used, good condition,
manufactured by ALKO
length 1400 mm
width 1400 mm
height 3000 mm
2sf7ha
suction- /blow in connecting piece D 2 x 250 mm
covering
with discharge / fan ca. 2,0 KW D 160 mm
air recirculation possible
with fans 2 piece
2 x 2,0 kW
diameter D 250 mm
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
We offer an industrial filter with an atomatic blinding system.
Manufacturer - JET CZ
Type -15.14.2.
Gznrho
Filter output - 7.000m3/hr
Fan - 11 kW
Year of manufacture 2007.
Dimensions - length x depth x height - 3000 x 1700 x 3350 mm.
Filter includes - 14 filter sleeves.
Filter in operation, possibility of testing.
Sell this barely used still as new JET cylinder grinder with accessories as shown in the pictures the original price was at 4200 €. It is a commercial sale VAT is shown FINAL PRICE WITH VAT 19%, no guarantee only pickup possible everything else you see on the pictures.
P7sspue2
Sell this with much love rebuilt Jet lathe VD 1100 with all accessories as shown in the pictures.
The machine is hardly used and in almost mint condition. Comes with table extension, travelling device, copying device, 3 and 4 jaw chuck suction device and much more.
Cileaiiomv
See pictures. No shipping possible only pick up.
This is a commercial sale with invoice and VAT shown.
NO WARRANTY
The CE125 series is an electrically driven high pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc.
Available models:
-----
50 Hz -bar-l/min.
CE125-200-240
CE125-1500-35
Pwgqt
CE125...
roll diameter: 375 mm
cutting width: 359 mm
cutting depht: 356 mm
table tilting: ja -5 bis + 45°
table size: 546mm x 406mm
band speed: 750 m/min
motor Power: 400V 1,5 kW
motor brake: ja / automatisch
suction connection: 100mm
Caoqhliyua
machine width: 750 mm
machine length: 812 mm
machine height: 1880 mm
weight: 174 kg
AL-KO POWER UNIT® 300 P-BP 30 -50
Intake port : 300 mm
nominal motor power : 7,5 kW / 3 Ph
Voltage: 400 V / 50 Hz
Maximum volume flow : 6000 m³ / h
Nominal volume flow : 5.089 m³ / h
Cakgfydwyz
Negative pressure 2.587 Pa
Filter area 30 m²
Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817
Briquetting capacity 30 - 50 kg / h
Briquette diameter: 50 mm
Weight: 1570 kg
Machine is brand new in our STOCK
- IMMEDIATELY AVAILABLE -
subject to prior sale
Location: 54634 Bitburg
The CE200 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc.
Available models:
-----
50 Hz -bar-l/min.
CE200-200-280
60 Hz -bar-l/min.
C...
The CD550 series of our high-pressure machines covers a range from 1000 to 2000 bar at a flow rate of 100 to 210 l/min. The pump is powered by a water-cooled 8-cylinder turbo intercooled Common Rail DEUTZ diesel engine with turbocharger. The 14-inch container is soundproofed, primed and then painted to provide corrosion resistance and a very nice appearance. The container is optionally available in DNV 2.7-1 approved version. The machine is equipped with an integrated 1250 litre fuel tank. All m...
The CE08 series is an electrically powered high pressure cleaner.
This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc.
Models available:
Bxa7gai
-----
CE08-series L/min
CE08-200 bar 15 7,5 hp water blaster unit 50Hz
CE08-200 bar 15 7,5 hp water blaster...
The CE20 belongs to the series of our electrically operated high pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame is made of hot-dip galvanised and powder-coated sheet metal mouldings with stainless steel side frames all round. The standard mod...
The CE40 belongs to the series of our high pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and surrounding side frames made of stainless steel. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eye facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca...
The CP22 belongs to the range of petrol-driven high-pressure machines at a pressure of 170 to 500 bar and a flow rate of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame is made of hot-dip galvanized and powder-coated sheet metal mouldings with stainless steel side frames all around. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet,...
The machines of the CD25 series are compact high pressure cleaners from 170 to 500 bar and a volume flow from 17 to 42 l/min. The pump is driven by a 3-cylinder, water-cooled Kubota diesel engine. The robust frame is made of stainless steel for durability and corrosion resistance. The powder coating provides for a very nice appearance. The machine has very compact dimensions of 1200mm x 800mm. This is the same size as the well-known EURO pallet. The frame stands firmly on 4 large rubber feet. Th...
The CDT50 in the trailer version covers a pressure of 230 to 2000 bar with a volume flow of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in trailer versi...
The CE100 series is an electrically driven high pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc.
Available models:
-----
50 Hz -bar-l/min.
CE100-300-135
CE100-500-80
CE100-1000-4...
The CD160 series of our high pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is driven by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel for durability and corrosion resistance. The frame is primed and then painted for a beautiful appearance. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and,...
We make it easier for you to find: "alko jet stream"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Machineseeker still biggest sponsors of 2nd German football league
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 250,000 inquiries per month
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
How to receive 100% of our e-mails
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.