Used Automation Vacum for sale (11,166)

Condition: new, Year of construction: 2024, Sifise Compact Industrial Palletizer Our state-of-the-art #palletizers are designed to streamline your production line and improve your workflow. With precision #engineering and advanced #technology, they can handle a wide variety of #products and pallet configurations, reducing the #risk of human error and increasing #productivity. Key Features: ✅ Space-saving design, also perfect for smaller production areas ✅ High-speed palletizing capabilities, increasing output and productivity Ljdpfx Agoma Ruxozsta ✅ Intelligent software for precise stacking and stability ✅ Easy-to-use interface, ensuring seamless integration into your existing systems ✅ Customizable options to meet your specific needs Say goodbye to the physical strain and repetitive motion injuries associated with manual palletizing, and say hello to a safer, more efficient way of working. Trust Sifise automation for all your palletizing needs.

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ambient conditions Temperature range: 10°–35°C Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Lsdpfx Aew Dn Uwjgzota Upon request, we can also sell our remaining raw material stocks for production.

Condition: used, Stöger Automation PESCE S&S bowl feeder 230V Lodowcar Sopfx Agzeta

Condition: good (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler(interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. Function sequence The station is loaded with the pre-assembled module via the transfer conveyor. The operating steps of the automatic station with the passage of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning of the WT with the preassembled assembly in St.2.1 - Lowering of the beam with the scanners and the vision sensor - Scanning of the 3 codes (front panel, front LP, SD LP), comparison with the database Ltedsibichopfx Agzea - Checking the correct latching of the FFC in the connector - Lifting the carrier and lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in St.2.2 - Positioning of the screwdriver and screwing of the front LP - Lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in pc.2.3 - Lowering of the light protection cover and contacting, positioning of the carrier with the test sensors from below - type-dependent testing of the SD + CD lighting slots and pushbuttons - Function test CD eject button - Lowering the WT onto the conveyor > continue If faults occur during the test, they are indicated on the display and can be rectified if possible. To do this, switch to manual mode and open the doors. After the repair and starting of the automatic system, the WT is tested again in the station. If no repair is possible (e.g. screw fault), the WT is marked as NOK in the control system and is not processed further. Manual NOK marking and ejection is also possible.

Year of construction: 2001, condition: ready for operation (used), Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. Ltjdpstqtw Uofx Agzoa

Year of construction: 2021, condition: like new (used), AVEREX HS-540i GTS Horizontal machining center with 8 pallets Control system - Fanuc M-Pro1 (0i-MF) - 10,4" color LCD - NC memory with 512 KB - AICC II Control with 200 blocks readable in advance - Ethernet and USB Device - Electronic handwheel - Weekly timer: Auto. Power On/Off of the machine - High Speed Skip - Manual Guide 0i - 54 (6+48) pairs of workpiece zero points - Tool Offset Memory C - 400 pairs of tool offsets - 400 storable programs - High Speed Skip Signal - Programmable spindle load monitoring - Tool Life Management - Advanced macro variables (#500-#999) - Program Restart - Helical Interpolation, Cylinder Jacket Interpolation - Drilling cycles, rigid tapping - Scaling, Mirroring, - Polar Coordinates Programming - Corner chamfering / Corner rounding - Blanking sets, up to 9 different - Customer macro "B Travels - travels X/Y/Z: 800/800/800 mm - spindle center to pallet surface: 30 - 830 mm - spindle nose to pallet center: 100 - 900 mm - travels B: 0-360 ° Speeds - rapid traverse X/Y/Z: 74/74/74 m/min - feed rate during milling: 0 - 40.000 mm/min - rapid traverse B: 66.6 rpm - 1G+ acceleration Pallet changer - rotary changer - number of pallets: 2 - pallet size 500 x 500 mm - Load capacity: 500 kg per pallet - workpiece size: Ø800 x H1.000 mm - Mechanical locking of the pallet clamping device - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,099 mm Tool changer - Tool holder: BBT 40 (SK 40 and HSK 63 optional) - Number of magazine positions: 80 - Max. Tool diameter: Ø95 mm - Max. tool diameter Max. tool diameter with free neighboring places: Ø185 mm Lsdpfoh Iy Snox Agzjta - Max. length: 400 mm - Max. Tool weight: 8 kg - Type: fixed station/chaotic table - Speed: 16 sec. for 80 tools - Tool change time: 0,9 sec./2,1 sec. (heavy tool) - Chip to chip time: 3.0 sec./3.5 sec. (heavy tool) Spindle - Spindle Taper: BBT 40 Big Plus™ - Speed: 15,000 rpm - Drive power: 37 kW - Torque: 249 Nm up to 1,150 rpm - Compressed air through and at the spindle - Bearing diameter: Ø71 mm - lubrication: oil / air - oil cooler Rotary axis - Axis: Full 4th axis - 66.6 rpm - Indexing: 0.001 - Clamping force: 5.000 Nm - Holding force: 1.973 Nm Linear guides - Manufacturer: THK - width: 45 mm - guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball screw - Manufacturer: TSUBAKI - Diameter: 40 mm - Internal cooling: Yes, temperature controlled - Feed forces X/Y/Z: 13.500 Nm - Lubrication: Oil / Air Coolant management - Coolant system incl. tank 550 liters and pumps - Chip spirals on the right and left side of the machine - Coolant through the spindle, 30 bar, incl. preparation for 70 bar - Coolant shower - oil skimmer Accuracies - positioning accuracy: ± 0,005mm - Repeating accuracy: ± 0,0025 mm Other - Adjustable thermal compensation of spindle and motor flanges - Central lubrication oil / air - CE - 50 kvA transformer Dimensions (APC 2 / 80 or 120 tools) - Machine size: 4.914 x 2.660 x 2.632 mm - Footprint: 4.914 x 3.880 x 2.632 mm - Machine weight: approx. 12,960 kg - Dual chip conveyor (combination hinged and scraper belt) - Magazine capacity increased from 80 (standard) to 120 ex works - BLUM TC50 probe with infrared transmission System for

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Robust container rotating device from Key Plant Automation (made in Great Britain) with a total load capacity of 3,000 kg. Continuously variable rotation speed. Suitable for component diameters from 100 to 1,400 mm. Included in delivery: Double foot pedal for right/left rotation with start/stop functionality. Machine is also available for rental. See data sheet for further information. We would be happy to deliver the machine to you at a cost. Ltsdpfx Aswaidrsgzsa

Condition: good (used), The following components from B&R Automation are for sale: Lsdpsrt T Awsfx Agzeta - Power Panel 120 - CPU CP476 Both were removed in 08/2022 and have worked without any problems to date.

Year of construction: 2005, condition: not inspected (used), Shuttle conveyor (Traverser) Manufacturer: JOT Automation Overall dimensions: 3200 x 500 x 1000 mm Shuttle conveyor (Traverser) Used to transfer PCB's from one PCB production line into two PCB production lines from single track Ltedpfxoib H Tqs Agzja to dual track operated machines or vice versa.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total width: 2,600 mm, Winding/Unwinding Station with Motor Drive Unwinding width: max. 2600mm Unwinding/rewinding via sensor (dancer control) Winding diameter/roll diameter: max. 1200mm Lodpewy H Dvjfx Agzota Double-sided folding bearings With clamping shaft for 3"/76mm diameter Winding direction switchable left/right Winding speed adjustable via rotary knob Robust welded frame, powder-coated, winder on castors Regulated drive of the clamping shaft via geared motor and frequency inverter Fully functional. Can be inspected if required.

Year of construction: 2018, condition: ready for operation (used), Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the "Fiber Placement" process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible. Ledpjriurfofx Agzeta

Year of construction: 2023, condition: new, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation Ltedpopiufwefx Agzja DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Year of construction: 1994, condition: excellent (used), Description:-table diameter 1400 mm -Table load of Max 3000 kg -Belt width of 150 mm Lteded Iw U Uopfx Agzja -Speed max. 25m / min -Belt thickness max. 1.2 mm Very compact and easy-to-use palette Unwinder diameter of turntable 1400 mm of more robust machine body with high capacity speed control of cam universally suitable for Multicoil

Condition: used, Year of construction: 1996, Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik Ltjdpfxsk Abn So Agzja

Year of construction: 2022, condition: new, we offer you our oil cooler to reduce the cutting oil temprature at CNC Turning Machine. Lodslzghpepfx Agzjta if you have some question please let us know.

Condition: excellent (used), Year of construction: 2009, Robot GHS-Automatio Type: SL 25/Easycontrol Year 2009 Electric Box Ljdeff Hdtepfx Agzsta

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Ljdpfx Agsm Nckfezsta

Condition: new, functionality: fully functional, Deutschmann Automation Unigate CL-PBDPV1 CL profibus. Lsdpfov N Ru Ejx Agzeta Complete PROFIBUS-DP-Slave interface Automatical Baud rate recognition (9600 bit/s - 12 Mbit/s) DPV0 and DPV1 supported Isolated PROFIBUS interface with 9-pin. D-sub connector PROFIBUS address adjustable via rotary switch Up to 244 Bytes input- and 244 Bytes ouput data (total data length 488 Bytes) Good working condition. Please check out our other listings as well.

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Lodpfxeu Nhiqj Agzsta Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: new, B&r ps 794 power supply module b&r br-automation Ltodpfsh Ruldjx Agzea 2005 ps 794 0gh-ps794 5vdc 24vdc input: 230v ac, 0.4a 8-30vdc weight: 620 gm

Condition: new, Year of construction: 2019, functionality: fully functional, overall weight: 390 kg, Our company purchased SMD placement machines from TWS AUTOMATION srl's Hungarian distributor, Microdolder Kft. These include the SR-3200 EVO automatic stencil printer and the ULD100 panel output and input feeder for the SR3200 stencil printer, which have not been used to this day. We are adding the TWS100 "Auto-balance" 4-sided stretchable frame for stencil plates and WS-52 Stencil plate storage to the stencil printer. The machines are brand new, never used because we did not need them. The tools shown in the photos belong together and we intend to sell them as a package. Lsdpfovuwfzox Agzjta Machines for sale: SR-3200 EVO automatic stencil printer 1 pc ULD100 panel output and input feeder for SR3200 stencil printer 1 pc TWS100 "Auto-balance" 4-sided stretchable frame for stencil plates 1 pc TWS-52 Stencil plate storage, for storing 80 stencils, 1 complete set The machines are brand new and have not been used The tools shown in the photos belong together and we intend to sell them as a package.

Condition: new, Year of construction: 2025, functionality: fully functional, This packaging system is used to pack food and non food products in different forms: powder, granular, solid irregular shapes and liquids. Machine is composed by a feeding elevator that gently lifts the products, elevator can be with plastic cups in Z shape or with PU or PVC belt having stainless steel structure or can be used an auger elevator for granular or dusty products. The product is fed to a multi head weighter having 10 , 14, 28 weighting modules. The weighter stands on a special design stainless steel platform to reduce the vibration. The packing machine is able to work with different thickness film, different film width and different materials (PE/PE/BOPP/Paper/Aluminum/Nylon) and produces the following bags: pillow, pillow with gusset, block back, quad seal bag and with eurohole option. The movement is performed by servo motors and all the controls parameters are adjusted by touch screen, all the electrical components are from brand name manufacturers like Omron and Siemens. Productivity from 25-80 bags/minute depending on the weight and volume. This packaging system can be upgraded with the product exit conveyer, labeling machine to place label on the bags, vibratory feeder for soft products, date and lot printer, gas injection, free flow metal detector for food products, rotary table to accumulate the bags. Lodpfxevld N Ue Agzota

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Ltjdpfxom H Uqkj Agzja

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fully automated robotic cells for different industries having main components: product preparing / aligning belt, Fanuc robot unit (different type based on application requirement), robot stand, robot gripper, roller / belt conveyor for final product. Machines are controlled by HMI interface no need to know robot programming code to operate the machines. We develop applications for staking, transferring , palletizing, sorting, pick and place, group and insert into boxes for bags, buckets, bottles, boxes, cans,etc. Each robotic cell can be upgraded with industrial vision system , labeling systems, marking systems and also software for monitoring production. Lodpeuvg Ahofx Agzota

Condition: ready for operation (used), Year of construction: 2001, With documentation, an inspection is possible. Ljdpfxof Ddrls Agzjta