Used Bi-Axial Mixers for sale (5,688)

Condition: good (used), Promoted by APEXPUMPS Bristol UK Iodpfjt A U H Isx Abrstc -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This Bi Matic's 612 model features a gluing unit, edge trimming unit, front and rear end trimming units, trimming and beveling unit, glue scraping unit, and final polishing brushes. It also includes a 2-way dust extractor and extraction hoses. Consider the opportunity to buy this Bi Matic's 612 edgebander. Contact us for further details. • Single-sided edge banding machine • Gluing unit • Edge trimming unit • Front and rear end trimming units • Trimming and beveling unit • Glue scraping unit • Final polishing brushes Isdsyhc Tnopfx Abrstc Additional equipment • 2-way dust extractor • Extraction hoses

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar Iedpfx Ajw Rcmyobretc

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Feed Speed: 7 m/min / Min. Panel Length: 80 mm / Min. Panel Width: 60 mm/ Max. Panel Height: 40 mm / Edge Thickness: Up to 3 mm / Glue Pot Capacity: 2 liters Isdpfxjx R E Nfe Abretc End Trimming: Dual vertical saws at 12000 rpm / Profile Trimming: Inclined unit at 15° with 12000 rpm This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for tact us for more information. Application Types Edge Banding

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 280 kg, operating pressure: 6 bar, compressed air connection: 6 bar, pneumatic connection: 6 bar, pressure: 6 bar, We are offering this used BI-MATIC Prima Plus 7.3-r.a. Edge Bander Partnership Edition, year of manufacture 2021. Units/Assemblies: - Jointing cutter unit including AIGNER diamond jointing cutter heads, with DIA interchangeable knife system Konstantin and controlled edge air-blow nozzle located behind the second jointing cutter head. - End trimming saw unit with extraction device, including pneumatically swiveling saw blades, adjustable and programmable from the control panel. - Radius milling unit. - Corner rounding unit (copy milling unit) with insert shelf function and 2-position turret. The entire unit can be pneumatically engaged and disengaged. - Radius scraper unit, engageable and disengageable, including extraction device with chip collection box for scraper shavings. - Flat scraper unit with 4-way usable scraper blades. The entire unit can be engaged and disengaged. Removed glue residues are extracted. - Buffing unit with 2 diagonally arranged cloth buffing wheels. Equipment: - High-gloss package: Roller scanning for radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety cabin for all units and the glue pot - Interior lighting - Operating panel with 12" touchscreen and intuitive user guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue pot with quick-change system and energy-saving mode in standby - Glue roller with feed screw for long and high workpieces (especially for PUR adhesive) - Pressure zone with motor-driven first pressure roller - Heavy-duty guillotine shears for 54 x 3 mm edges Itsdjya I Ubspfx Abrjc - Adjustable infeed guide via handwheel (jointing thickness adjustment) with digital display - Upper roller pressure beam with digital workpiece thickness display and handwheel adjustment - Pressure zone with digital display and handwheel adjustment - Manual 2-position turret for radius milling unit - Manual 2-position turret for corner rounding unit - Manual 2-position turret for radius scraper unit Technical data: Edge thickness: 0.4 - 3 mm Minimum panel width (without corner rounding unit): 80 mm Minimum panel width (with corner rounding unit): 130 mm Minimum panel length (without corner rounding unit): 100 mm Minimum panel length (with corner rounding unit): 300 mm Minimum panel thickness: 10 mm Maximum panel thickness: 50 mm Feed speed: 9 m/min Extraction port: 2 x 150 mm Connection: 9 kW - 400 V Compressed air: 6 bar Order no.: BIMA0650 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 55 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, NEW !!!industrial axial fan 910mm diam 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2311/ 3PCS IN STOCK Itjdpfexx U Tgox Abrec Diameter 910mm 400V 29000m³/h 680/520 rpm manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Flow rate (m³/h): 29000 Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Bearing mounted Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Connection type: Terminal box Speed ​​(rpm): 680/520 Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz Itodpfx Abjnzt A Hjrjc - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: good (used), Year of construction: 2004, overall weight: 40,000 kg, pressing force: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die Isdpou Au U Tofx Abrjtc WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Itodpfx Asgavc Rjbrec

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Itodpfxjgavc Ue Abrjc

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Iodpegavc Aefx Abretc

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Itodpfx Absykn T Eoroc Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: used, Comprehensively tested and refurbished, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 750 litre Mixing trough: 1000mm wide x 1500mm long Discharge Type: pneumatically operated twin bomb door discharge Type Of Blades: Twin shaft paddles Itsdpfx Aoykn Tlsbroc Motor: 15 kw 415 volt 3/50 motor Also includes: Mild steel frame A video of this mixer is available below.

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame Itodpjykn S Ujfx Abrec A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has domed hood/lid with clamps. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Ijdpfx Aeykn Tfjbrotc

Condition: used, Comprehensively tested and refurbished used Morton-Lödige model FKM800 304 stainless steel ploughshare mixer. Manufacturer: Morton Iedpfx Abeykn Suorstc Material: Stainless steel (304) Capacity: 240-560 litre working capacity. 800 litre total capacity (product dependent) Mixing Chamber: 1,800mm straight side x 760mm diameter Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve Type Of Blades: Stainless Steel Shaft with Ploughshare Blades Motor: 15kW Motor with Gearbox Also Includes: 2 Stainless Steel Side Entry Choppers Direct Driven by 4kW Motors. Click on the link below to see a video of the machine running. Dimensions: 1,800mm straight side x 760mm diameter

Condition: used, Comprehensively tested, used Lodige Model KM 600D-3ZMZ 321 stainless steel continuous jacketed ploughshare mixer. Manufacturer: Lodige Material: Stainless steel Capacity: 300 litre working capacity. 600 litre total capacity (product dependent) Mixing trough: 630 mm diameter X 2000 mm long Discharge Type: electrically driven Weir plate discharge direct driven by motor and gearbox Type Of Blades: Stainless steel ploughshare blades Motor: 15 kW 380 volt 3/50 1500 rpm motor and sew type R100P gearbox. Also includes: carbon steel jacket 85 litre capacity rated 5 bar design pressure at 158°C - (3) stainless steel multiple blade choppers direct driven by 5.5 kW 380 volt 3/50 3000 rpm motors - (2) side inspection doors. - mounted on mild steel support frame with (4) wheels. - Throughput performance approximately 18 cubic meter/hour with 1 minute residence time. A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 15 hp Material Of Construction: Stainless Steel Choppers (Y/N): Yes Iodpfx Aboykn Snorjtc Number Of Choppers (1-10): 3 Horsepower Of Choppers: 5.5 RPM Of Choppers: 3000 HP Of Unit: 15 Revolutions Per Minute: 1500 Jacket (Y/N): Yes Jacket Pressure: 5 Jacket Temperature: 158

Condition: used, Comprehensively tested and refurbished used Winkworth model RT400 316 stainless steel high speed ploughshare (T-Arm) mixer. Material: Stainless steel (316) Capacity: 400 litre (Product Dependent) Mixing Chamber: 1,300mm Long x 800mm Diameter Discharge Type: Centre Bottom Pneumatically Operated Flap Discharge Valve Type Of Blades: T-Arm Blades Motor: 22kW SEW Geared Motor Also includes: (1) Stainless Steel Side Entry Refiner Driven by a 7.5kW Motor. Provision for a Second Chopper. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Itedpfxoykn Shs Abrjc Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted). Ijdpfxoykn Sbe Abrjtc

Condition: used, Used NAUTAMIX Stainless Steel Mixer No. 20095 Similar to the Type MBX10 Useful capacity : 1000 litre Iodpeyi Evhsfx Abrstc Gear motor : 0.37 kw – Hp 0.5 – Rpm 58 – 3x 220/380 volts Motor : 3 kw – Hp 4 – Rpm 1500 – 3x 380 volts

Condition: used, Used approximately 400 litre capacity (product dependent) stainless steel twin paddle mixer. Mixing chamber measures approximately 1,300mm long x 850mm wide x 650mm deep. Stainless steel paddles driven by electric motor/gearbox. Unit includes hydraulic powerpack for tilt discharge. Has local operator controls. Itodpfxsyi Evbj Abrjc

Condition: used, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,680 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 9,223 kg, Gross weight: 39,000 kg, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2015, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Vector1950, Refrigeration unit: Diesel/electric, Engine hours / electric: 13,212, Engine hours / diesel: 9,234, Body insulation, Heating, Wall thickness: 65 mm, Type of refrigeration: Cooling, Additional evaporator, Axle type: BPW, Spare wheel, Spare wheel tread: 5% = Additional Information = Itsdpjw A Hycjfx Abroc General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 9 mm; Tire tread right: 16 mm Axle 2: Tire tread left: 9 mm; Tire tread right: 10 mm Axle 3: Tire tread left: 14 mm; Tire tread right: 15 mm Weights Unladen weight: 9,223 kg Payload: 29,777 kg Gross vehicle weight: 39,000 kg Functionality Refrigeration unit: Diesel and electric (9,234 running hours diesel; 13,212 electric) Wall thickness: 65 mm Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Visual condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good pricing • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Professional technical services • The safety of 'recognizable quality' • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Dunli, Axial fan Axial fan -Type: YMF.A4T-630S-7FIIIS01 -Power: 1.4 kW at 1400 rpm Iedpfxjylhwgs Abrstc -Fan wheel: Ø 630 mm / see photos -Quantity: 1x fan available -Dimensions: 805/805/H265 mm -Weight: 36 kg

Condition: used, Used LODIGE mixer Type M5R - Double jacket - Total volume : 5 litre - Useful capacity : 4 litre - Motor : 0.75 kw – Hp 1 – 220/380 volts - Variable speed Specifications: Itedpfx Aeyh Nalobrjc Bowl Volume: 4 gal Motor Power: 1 hp Jacket (Y/N): Y

Condition: used, Used SILVERSON stainless steel in-line mixer Type 450L N° : C450L M642 Hp 10 – 3x 220/380 volts Itsdpfoyh Hzmsx Abrsc