Used Busch Mm 1322 Av for sale (123)

Condition: excellent (used), Year of construction: 2008, We have 3 pieces in stock Year of production: 2008 Codpfxjzhv Azj Acperh Ultimate vacuum (P_abs): 100 hPa (mbar) Nominal capacity: 250 m³/h

Condition: used, Year of construction: 2008, There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg. Credpfx Acjz Da Nhopjh

Year of construction: 2010, condition: used, Claw vacuum pump Dry-running Cjdsdkaf Uspfx Acperh Manufacturer: Busch Type: Mink MM 1322 AV Motor: DS 400V Suction capacity: 300 m³/h Ultimate pressure: approx. 150 mbar (abs.) Warranty: 12 months Condition: Like new Accessories: Suction filter; operating manual Delivery time: short notice

Condition: good (used), Year of construction: 2010, Ref. no.: 18637 Manufacturer: BUSCH Type: MM 1252 AV (15 Stück) Year of construction: 2010 Further information: Make | Model | Year | Capacity | Frequency | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | BUSCH MINK MM 1252 AV VACUUM PUMPS A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale. The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications. TECHNICAL SPECIFICATIONS • Manufacturer: Busch • Model: MINK MM 1252 AV • Technology: Dry Claw / Oil-Free Vacuum Technology • Capacity: 250 – 300 m³/h Codpsy Tlcwjfx Acperh • Final Vacuum: 100 hPa (0.1 bar) • Frequency: 50/60 Hz • Year of Manufacture: 2009 / 2010 • Origin: Germany MAIN ADVANTAGES • Oil-free operating system • Low maintenance costs • Energy-efficient operation • Quiet and reliable performance • Suitable for continuous industrial operation • High Busch quality with worldwide service support APPLICATION AREAS • Plastic injection molding machines • Central vacuum systems • Packaging machines • Thermoforming systems • Automation and conveying systems • Industrial production facilities

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 070068681, Hz: 50/60 V250/300 m3/h Crjdpfx Aeyqyb Ijcpsh P 100 hPa (0.1 bar)

Condition: excellent (used), Year of construction: 2002, 62 m³/h 60 hPa (mbar) Cjdpfxeyqydij Acpjrh 1,5 kW

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 02022348, 50 Hz 140 m³/h 60 hPa Csdpfx Acjy H Iareperh

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Cjdpfx Acotu H Eiepjrh Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Condition: used, Year of construction: 2013, Claw Vacuum Pump Dry Manufacturer: Busch Type: Mink MM 1502 AV V8 Motor: DS 400V Suction capacity: 500/580 m³/h Ultimate pressure: approx. 200 mbar (abs.) Accessories: Intake filter; Operating instructions Delivery time: Short term Crjdpfxov I Agds Acpoh

Year of construction: 2013, condition: used, Claw vacuum pump Dry-running Manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction capacity: 250/300 m³/h Crjdpecfw Tnefx Acpoh Final pressure: approx. 100 mbar (abs.) Accessories: Suction filter; Operating manual Delivery time: short-term

Condition: excellent (used), Year of construction: 2015, BUSCH Used Vacuum pump with control and pressure tank Year of manufacture 2015 Codpepch D Tsfx Acperh Nominal suction capacity 160 m³/h Ultimate pressure 60 hPa (mbar) motor nominal power 4,0 kW Nominal motor speed 1500 min-¹ Noise level (ISO 2151) 70 dB(A) Oil quantity 1 l Weight approx. 240 kg Dimensions (L x W x H) 1040 x 515 x 450 mm Gas inlet G 2" Gas outlet R 1" Two more pumps can be connected to the control unit Pressure vessel from K+B Year of construction 2004 Horizontal 1000L capacity max. allowed temperature 50°C max. allowed pressure -1/0 bar

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Credjz Ixkrjpfx Acpoh Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: excellent (used), functionality: fully functional, overall weight: 175 kg, volume flow: 80 m³/h, final pressure: 0.06 bar, input voltage: 400 V, rotational speed (max.): 1,500 rpm, Busch Mink MM 1144B V03 Vacuum Pump 2 pumps available with very little work done each. Pumps were purchased and installed for a project that was never commissioned. Selling on behalf of our customer. Cedpsz Hbqxofx Acpjrh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Busch MM 1142 B VS3 Vacuum Pump Manufacturer: Busch Vacuum Solutions Model: MM 1142 B VS3 Serial Number: D15242694 Year of Manufacture: 2015 Capacity: 140 m³/h Weight: 175 kg Dimensions: 1000 mm × 400 mm × 700 mm Pump Type: Dry claw vacuum pump The Busch MM 1142 B VS3 vacuum pump is a modern, oil-free “dry claw” pump designed for efficient and clean generation of vacuum in industrial applications. Its oil-free compression chamber design eliminates the risk of process contamination, making this pump ideal for industries requiring high process purity. Crodpsxvi Aqefx Acpoh The unit features quiet operation, low operating costs, and high reliability. Its compact design makes integration into production lines and central vacuum systems easy. Applications: - Food and packaging industry - Production lines and automatic vacuum systems - Plastics processing, foundry work, printing - Laboratories and central vacuum systems

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle Codpfxjzz Tm Re Acporh The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Bore measuring screws, internal measuring screw from the manufacturer Busch D.B.P.a. Ausl.PAT. Credpfx Acezumc Sspeh 3-point internal micrometer - bore micrometer, used with wooden case – Friedr. Strack Wuppertal Measuring range [mm] 25-30 / 30-40 Scale value [mm] 0.005 Testing equipment – internal measuring device – with 3-line contact 2 pieces available Price negotiable Our asking price per piece is €84.00 net, ex works, plus packaging costs. All technical specifications are subject to typographical errors and inaccuracies. Sale exclusively to countries within the EU.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, BUSCH HL 110 (Pile Lift) Year: 2021 # Max. load: 1000 kg Platform E size: 780 x 1100 mm # Max. stroke: 900 mm Crodpoy Iuabefx Acpjh In excellent working condition # Location: Krefeld, Germany

Year of construction: 2013, condition: used, Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction capacity: 140 m³/h Final pressure: approx. 60 mbar (absolute) Accessories: Intake filter; Operating manual Delivery time: short notice Crjdpfx Acscfw Ukepjh

Condition: used, Year of construction: 1999, This Busch SWH 125, manufactured in 1999, is a robust and reliable stacking unit currently located in Germany and actively in use within a printshop environment. With a solid build and dimensions of 800 x 1200 mm, it offers dependable performance for industrial stacking operations. Cedpfx Aoxpw Etocperh The unit is in good condition, showing no signs of damage, and is designed to accommodate a wide range of stacking needs. It features a generous platform width of 1250 mm, allowing for efficient handling of various materials. The stacking height is adjustable, with a maximum of 1350 mm and a minimum of 650 mm, providing flexibility for different production requirements. This machine, bearing serial number 409/851, reflects Busch???s commitment to engineering excellence and durability. It remains a practical choice for operations seeking consistent stacking performance in a professional setting. Format: 800 x 1200 mm Equipment: Good condition without any damage Maximum stacking height: 1350 mm Minimum stacking height: 650 mm Platform width: 1250 mm

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 liquid ring vacuum pump. Please read the description carefully from beginning to end! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Caution! The pump does not have explosion-proof certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made of the special Alloy 59 material! This alloy is used when conventional chrome-nickel steels are no longer sufficient in terms of corrosion resistance. Credpfx Aeigqutocpoh Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance to mineral acids such as nitric acid, phosphoric acid, sulfuric acid, and hydrochloric acid, and especially to sulfuric acid/hydrochloric acid mixtures. Typical applications are: -Equipment components for processes in organic chemistry with chloride-containing media, especially when catalysts based on chlorides are used. -Multipurpose plants in the chemical industry -Plant parts in the fine chemical and pharmaceutical industries -Scrubbers, heat exchangers, flaps, fans, and agitators for flue gas desulfurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for ship diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 volts Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings are new, and the mechanical seal has been refurbished by a specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: used, Year of construction: 2020, Pile turner Busch SWH 90 RLA Year: 2020 Crjdpfx Ajuv Hulocpjh Description: - Airing - Vibrating - Aligning Max. size: 600 x 750 mm

Condition: reconditioned (used), Year of construction: 2015, Refurbished BUSCH SECO SV 1040 C 000 INXX 1.25 kW motor Crsdpfew Sm A Iox Acpsh P max = 120 hPa (mbar) V max = 40 m3/h Weight approx. 40 kg

Condition: good (used), Busch Vacuum Pump Cjdewa Ucgjpfx Acpjrh Type: 400-212 235 CFM Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: excellent (used), Keyway milling machine Crjdpfx Ajzdt Hpecpeh Manufacturer: Busch Type: NF1 Year of manufacture: 1984 4 spindle speeds from 380 - 1500 rpm. Motor: 380 Volts Table surface: 600 x 250 mm Spindle motor: 380 Volts Power: 1.1 kW Weight: 780 kg Dimensions: Height with pallet: 1860 mm Width: 1300 mm Depth: 950 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, BUSCH R5 RA 1000 B | Rotary vacuum pump / High-performance vacuum unit Manufacturer: Busch Vacuum Solutions Model / Type: R5 RA 1000 B 4Z1 EKXX Serial number: C035000168 Crsdpfxoy Umv Is Acpjh Year of manufacture: 2003 Power supply: 400 V / 3 Ph / 50 Hz Capacity: 1000 m³/h Rotational speed: 1000-1200 rpm Overall dimensions: 1800 x 1000 x 1700 mm The Busch R5 RA 1000 B, an industrial rotary vacuum pump, is one of the most reliable and powerful vacuum devices available on the market. This model, with its enormous suction capacity of up to 1000 m³/h, has been designed for continuous, uncompromising operation in the most demanding industrial environments. Devices of this class are the heart of the machinery in large meat processing plants, slaughterhouses, food packaging plants, as well as in the chemical industry and plastics processing. The pump's design is based on proven oil-lubricated rotary vane technology, which allows for achieving stable, very high ultimate vacuum while maintaining quiet operation and optimal system temperature. The RA 1000 B model is characterized by exceptional resistance to water vapor and volatile product particles thanks to its advanced, internal oil filtration and recirculation system. Using this pump as a central vacuum unit allows for the simultaneous operation of multiple packaging or process machines in production halls, resulting in significant energy savings and simplified maintenance.