Copy wood lathe buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Wood professional copy lathe CL1200Y with frequency converter 230 V, like new, CE, 1,1 kW, 395 kg, 1200 mm reserved SpitzenweitePreisänderungen, mistakes, printing and typographical errors reserved Ba3b7lpfmc more
6
Wood copying lathe (lathe) HAPFO type AP 6000 BJ. 1989 Centre distance and copy length 1.500 mm Motor 2,2 kW Speed 375-2,700 rpm (stepless adjustable) Feed speed 0-3 m / min (infinitely variable) electromotive Wide range of accessories: -Cross copy Setup -Four-jaw bezel 50-80 -Four-jaw bezel 80-120 -Ring bezel with Strip steel -Left and right rotation -3 x impact feed -2 x faceplate (200 mm and 400 mm) -Four jaw Chuck Btvnowv Chuck -4 x hand rest -Revolving lathe -Sechszack... more
12

Woodworking copy Lathe, Wood Turning Hapfo AP5000 Hydro King

More Hapfo Ap 5000
Unit Barleyfield Industrial Estate 20, Brynmawr, GBUnited Kingdom
5721 km
1997
good (used)
Hapfo AP5000 Hydro King woodworking lathe. Came from a company that recently went into administration Complete with qty of tooling and templates. Clz2iqo Please contact for further information. more
3

Wood copying lathe HEMPEL CHS 12

Staufenberg, GermanyGermany dealership location
6563 km
used
Wood copy lathes Fabr. HEMPEL type CHS 12 Technical data: 3hh0fvrz Turning diameter 250 mm Turning length 1200 mm 6 spindle RPM 1100-5800 RPM. Hydr. The tailstock Quill clamping pressure 20 bar Power 12.5 HP Dimensions 2230 x 1500 x 1450 mm with -2 piercing supporte used, in good condition more
6
Distance between centers: 1000 mm Height: 200 mm Copying length: about 950 mm Infinitely variable speed: 340-4000 r / min. Weight 150 kg Weight of the machine (L x W x H): 1700 x 400 x 1130 mm Ux0gc more
4
Blrcfjvs COPY WOODTURNING LATHE BRAND VALERI MOD. 4M/65 ZI max distance between the tips mm 1000 interaxis between the tips mm 200 more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bbuqs77g0j 74.8" (1900mm) max. between centers and 8-5/16" (210mm) height of center over bed, max. copying dia. of 3.5" (90mm) with standard steady rest. 5.5 Hp spindle motor & 3 Hp hydraulic motor. Automatic work cycle sequencing with electronic control. -- Electronic drive from 1000 - 500 RPM spindle speeds; Hydraulic variable speed carriage. --Equipped with: One Hydraulic tracing units; 3.5" max. square part size. --Includes: (2) backnife holders an... more
10
Bciesbp2fn Serial No. 19470 Centre height 400mm Distance tailstock to faceplate 3000mm Swing over bed 850mm Swing over saddle 650mm Maximum diameter held in steadies 250mm Minimum distance between centres 170mm Input 380/3/50 ac 14 kW Spindle speeds 1.2-38 rpm Equipment "Rank Mikop" Hydraulic Copying Attachment Model R180 Length 22'8" / 6.91m Width 6'6" / 1.98m Height 5' / 1.52m Nett weight 8.43 ton / 8560 kgs Comments ***Video shows the machine under power*** more
8
Used lathe Internal number: m2564 Bg3lq9mp Manufacturer Geiger Type unknown Ma. Number 15111 Year unknown Centre distance up to 1,800 mm Tip height 400 mm Speeds of 112 up to 2,250 RPM. Total length 3.05 m Face plate: Metal 800 mm Wood 1,500 mm Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. We will gladly send you more photos by E-Mail. A forklift/crane for loading is available. We reserve the right to a sale. Th... more
11

Copying lathe Hapfo

Oberkail, GermanyGermany
6437 km
1987
excellent (used)
Woodturning machine with copy device Fabr. Hapfo Bu. 1987 Gmvpyapgo Top width 1500 mm with 3 jaw Chuck + accessories (Sharpener for chisel). more


copy wood ...
daily

New machines via email!

Stay updated!
6
Tp3vfoycj Max. length: 1400 mm Max. diameter: 250 mm Hopper feed at the rear Reproductive tracer (tamplate or real modell) 2 front units and 3 jump-in knife tools on top more
5
distance between centres 1,600 mm 7amtwouns centre height 300 mm stepless speed adjustment - reconstruction in 1998 three-jaw chuck 200 mm additional information to follow more
1

HYDRAULIC COPY LATHE COYER CP 1300 SA

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Iejekbz Coyer Automatic Hydraulic Copy Lathe Model CP 1300 SA with hopper feed. -- Equipped with: One finishing back knife slides two heavy precision Teflon columns for a balanced effortless smooth knife traverse. Tool carriage with two V-roughing knives with respective high-low speeds controlled by proximity switches. -- Sequence and Hydraulic Controls: Carriage high-low speed, knife pressure and tailstock holding hydraulic pressures are centralized... more
1
Elektra Beckum lathe HDM1000, BJ. 1992, very good condition, standard equipment, chucks, adapters on M33, 0, 1000 reserved 9kW, 230V, mm centre distance, 190 mm SpitzenhöhePreisänderungen, subject to mistakes, printing, and typographical errors Beypxvd more
9
Wood lathe turning machine Model:Lennartsfors Type:Royal V-matic 12 No:60211 Year:1986 Wood late Lennartsfors (swedish made),included, skruw chuck, 3 jaw chuck, , 3-backschuck, bowl plate, service tools Wood late Center distance 1200mm Center hight 200mm Bcqdj3b0qg Spindle speed 400-1000-1500-2000-2500-3000-3400 v/min Motor 400 volt, 50 Hz, 3 phase Stock no:103564BXA more
6
"Automatic wood turning lathe HAPFO AP 5000HYDRO 7096 Point width mm: 1.600 Copying stroke: 150 Copying length: 1.500 Turning diameter max mm: 300 Spindle rotation speed min 1/min: 400 Spindle rotation speed max 1/min: 3.200 Rotation speed steps: 8 Main motor power kW: 1,5 Feedrate max m/min: 3,5 Continuously variable feed: Yes Copying from template: Yes Tracing: hydraulic Steady rest: Ring and four-jaw CE-mark: Yes Ncgir Operating status: still connected" more
6

Wood Turning Lathe Hapfo AHDK- 120

Lippstadt, GermanyGermany dealership location
6465 km
1977
good (used)
Wood lathe by Hopfo on a good fully functional State Heavy cast iron machine 380 Volt motor with 1500-3000 rpm Fzh7vwzq0 140 cm centre distance more
6
Heidenreich & Harbeck copying lathe Type Unicop V3 I Top height 315 mm Top width 1000 mm main motor 10 kW 18 speeds: 22.4-1120 RPM. Universal copying rotating device, copying length max. 750 mm Three-jaw Chuck Dpiyr8n Multifix recording Coolant system more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glm9lfwgq CENTAURO TA-F-EC Automatic Copy Lathe with (2) Copiers and Hopper [...] control of the machine makes it possible to program the complete turning cycle with (1 or 2) passes for fluting & spiral twist in both clockwise/anti-clockwise and cross-milling using the required indexing & [...] Specifications: -- 78.7" (2,000 mm) Max. between centers, 10 HP (15 kW) main motor, variable 0 - 4,500 RPM spindle speed; -- 1.5 HP (1.1 kW) Hydraulic power pack ... more
1
Lathe HDE650 of Hager, BJ. 2007, like new, variable speed, 2.2 kW, 1300 mm centre distance, price changes reserved, errors, printing and typographical errors reserved Ba3cak07um more
6
HEMPEL CKE-15 turninglathe with sawblade and belt sanding in same operation. Caaxelrk automatic loading and re-charge cycle. turning length 1500 mm. more
4
Tip height over bed 30 mm Top length 140 mm Fully functional, there are reverse charging AIDS. I9dpye2 The photos reflect the current state. more
6
no. of spindles: 4 motor each 0,5 kW revolution: 12/18,000 rpm Hdqyrfg3g distance of spindles: 320 mm max. workpiece length: 1,000 mm prompt avialbale, has to be dismantled for move out --ᐳ compact loading from 1-man-carpentry, well maintained /less used more
8

CNC wood lathe Killinger Km 8000 Lignotrnic CNC

Lienen, GermanyGermany dealership location
6424 km
2001
good (used)
Killinger CNC wood lathe Lignotronic, mint condition, top width 1700 mm, 4 KW, speed continuous feed continuously, servo motor - industrial PC with NUM - control, ring bezel, four jaw bezel 30-60 and 60-100 mm, hydraulic tailstock, pneumatic drives, Werkstueckeinlegevorrichtung, CAD - software Profilcad on machine and Office Baric2rx9v more
1

MULTI SPINDLE COPY LATHE ZUCKERMANN OPTIMA 1200/8/S

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 3y2faib2 ZUCKERMANN OPTIMA 1200/8/S Copy Lathe for asymmetrical or symmetrical wood turnings ranging from furniture legs (Queen Anne), gunstocks, guitar necks, to tool handles and the like. -- General Specs: 8-Spindle Copy Lathe, 42" max. copying length, max. working dia. 200 mm (7.86"); 5.5 HP motor on each spindle, 6,000 RPM belt driven spindle with cup cutters. All cutters are copying according to one sample specimen. -- Equipped with: (8) Single... more
1
Wood Pro wood lathe MC1220, BJ. 2015, very good condition, CE, standard equipment, price changes reserved, errors, printing, and typographical errors reserved Ejnoc87d more
9
Technical data: Length 2700 mm Width 670 mm Height 1300 mm 1700 x 3400 mm footprint Top width (default) 1500 mm Tip height 300 mm Copy turning length (default) 1500 mm Maximum work piece ø 350 mm Spindle motor 380 V / 50 Hz / 2,2 kW (maintenance-free) Spindle speed: from 375 to 2700 RPM Ndibz Spindle rotation direction right Spindle: Thread M45/inner cone MK4 Tailstock: Morse MK3 Copy Setup Support with hand wheel and electric feed forward continuously adjustable from 0 to 1.5 ... more
4

Wood lathe / lathe Geiger HGZ R30FKR

Berlin, GermanyGermany
6735 km
1975
ready for operation (used)
Tip height over bed 30 mm Top length 140 mm Yntwy7lv Fully functional, there are reverse charging AIDS. The photos reflect the current state. more
7
Wooden Kopierfraes and lathe HAPFO MOD: AP 8000 HF (SFE) B: 1992 Tip height - 270 mm top width – 2000 mm. Maximum workpiece diameter - 320 mm Spindle drive - pole switchable engine - 1,3 / 2,2 kW Spindle retainer - M 45, MK 4 inner cone Copy Setup: hydr. Scanning over copy slide Template sampling from the front adjustable via Handwheel and gauge built to. Kopierfraeslaenge - 1250 mm, support speed is infinitely adjustable from 0-3 m / min X3htdzu Wound gear left - and rechssteigend wi... more
9
KILLINGER type KM 6000 S-hydro Wood copying lathe Second-hand machine . No., BJ. 1996 Article number: KUW_G180105 Description top height 280 mm Top width 1700 mm Copy length longitudinal 320 mm Spindle n = 500-4500 RPM Hydraulic profile scanning Sample pressure 65 g Copy carriage stroke 75 mm N adjustment infinitely variable mechanical Tailstock Quill MK3 Pinolweg 160 mm Spindle retainer M 33 DIN 800 Hollow spindle 18 mm MK3 Power 400V / 50 Hz 2.2 kW Advance 0-4 m / min ste... more
1
Elect./Voltage: 400/440V, 50/60 Cy, 3 Ph Ncb0l 3,100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. of 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. -- 6" (150 mm) Hydraulic tracing stroke. 5.5 HP (4 kW) drive motor, electronic variable spindle rotation speeds from 300 - 3,200 RPM, carriage speed infinitely variable feed by DC drive 0 - 15.5 FPM. -- Spindle Shaft: Double, precision, sealed ball beari... more
1
Ferm, 1997, good condition, 450 W, 230 V, 1000 mm centre distance 180 mm centre height, 20 kgPreisänderungen reserved wood lathe, mistakes, printing, and typographical errors reserved Bbrd9mm3v2 more
1
DB 450 - small lathe WOOD STAR DB 450 series equipment Lathe in a compact design for the hobbyists and professional Particularly silent and quiet run Five speeds adjustable Top width 450 mm to 1000 mm can be extended optionally Description: Machine bed of torsion-free cast iron for smoothness and precision Tail and spindle stocks made of sturdy cast iron Tailstock with stroke 50 mm as standard with running lathe Speed adjustment in 5 levels via a v-belt Easily adjustable steel suppo... more
10
Description: They offer here on a working copy milling machine, brand of elumatec, which is known for excellent quality of your. There are small traces of use. Technical data router: Brand: Elumatec Type: KF 78/60 Vertical milling unit: 290 x 100 stroke 120 mm Horizontal milling unit: 270 x 90 stroke 120 mm Speeds of the milling spindles: 6000 / 12000 U / min Lusrj Bbv8j7zixw Profile areas: 150 x 150 mm 2 motors: 220/380 50 1 V Hz PS Machine weight approx.: 270 kg Space re... more
5
Centre distance approx. 1.000 mm. 8-speed right - linkslauf,. compl. palmrest. Vierzack drive,. Revolving lathe, Bahvnidogu Bezel more
4

woodturning lathe locatelli mk-secc 1600

machelen, BelgiumBelgium dealership location
6253 km
2014
as good as new (ex-display)
locatelli mk se-cc 1600 Juq8zq from 2014 in perfect conditiion very low use more
1
Elect./Voltage: Ikh02kn HAPFO AP-5000/HYDRO Hydraulic Copy Lathe. -- Specifications: 62-3/4" Max. chucking cap., 59" copy length and 9-3/4" max. turning dia.; (1) 2.3/1.75 HP two-speed spindle motor, 0.5 HP DC motor feed drive for carriage. Feed electronic infinitely variable 0 - 11.5 FPM; (1) innovative hydraulic tracing device with 6" stroke and only 2-3/8 ounce pressure, center height 9-27/32". -- Includes: (1) HSS Copy lathe tool, original sample tracing device, dust collection hood, r... more
1
Holzmann Robby 90, good condition, standard AusstattungPreisänderungen reserved, reserved errors, printing, and typographical errors Bcrmckmlm9 more
1
Used woodturning machine Hapfo model AP 3000 with copying device KA-90 Year 1991 peak height 255 mm, distance between centers 1100 mm Dimensions LxWxH about 2000x4500x1250 mm motor 380 V; 1.5 kw spindle speeds 400; 700; 1200; 1600 rev / min. Weight about 240 kg Iwd0k3f more
3
Year: 70-ies Condition: used condition! Delivery condition: the copying apparatus is used and is sold as seen in detail, without any guarantee or other indemnity in the state. Delivery: as agreed and written orders All prices quoted are for delivery ex works, plus VAT.. VAT. (Domestically), excluding packaging and transport insurance. Payment: At dispatch, before delivery net cash. Other: All technical specifications were made on existing documentation, errors excepted. You are welcome to come t... more

Copying Lathe HEMPEL CH8

Gersfeld, GermanyGermany dealership location
6619 km
unexamined (used)
turning diameter max.: 100 mm turning length max : 800 mm Fe7byur performance: 50 to 650 Pcs./h despending on is length and diameter weight: 840 kg dimensions: 2,2 x 0,8 x 1,2 m more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Glmzmofv3 NC automatic copy lathe for symetric and asymetric parts. 76" max. length cap with automatic hopper feed of 65" (1700 mm) stock capacity. -- Single spindle copy (from template or sample) shaping and sanding lathe with SIEMENS "Sinumnerik 810" NC control, color graphics display; can program spindle speeds, feedrate, parameters etc for each profile. 76" Max. length with double end drive, 4 HP motor, shaper head with 5.5 HP motor. -- Variable ... more
1
Wood Pro lathe HM1642, good condition, CE, standard equipment, continuous, reserved 1,1 kW, 175 kg, 0-3200, 1060 mm centre distance, 205 mm SpitzenhöhePreisänderungen, errors, printing and typographical errors reserved Bvj93fvm more
4

Copy lathe Hempel CHS 9

Löhne, GermanyGermany dealership location
6471 km
used
Heavy duty machine - with hydraulic feed Duthqy Capacity app.: 60 - 150 pcs./h Max. workpiece length : 900mm Max. workpiece diameter: 250mm Hydraulic profiling units: 4 pcs. more
2

Wood lathe JOWELL 200 S

Wiesbaden, GermanyGermany dealership location
6534 km
as good as new (ex-display)
center height: 200 mm center width: 1000 mm max. turning diameter over bed: 400 mm spindle bore: 20 mm collet taper of tailstock sleeve: 2 MK spindle rotations: 370 - 2000 rpm electrical drive: 380 V, ca. 0,75 kW space needed: 500 x 1710 x 1200 mm weight: 80 kg Rhn2bl8zu more
6
Nr. 3577: 1 gebr. Hydraulische Kopiereinrichtung Fabr. RANK Typ MIMIKOP Bauj. 1975 2 Hydraulikmotoren Leitlineal 2000 mm Antriebsleistung: 1,2 kW Fzapgndt0 (Urspruenglich verbaut an VDF V 800) more
2

copying lathe HEMPEL CL 12

Gersfeld, GermanyGermany dealership location
6619 km
unexamined (used)
Copying lathe with hand crank control Gaokyymf8 more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. 2q7bwm HAPFO AP-5000-NC-3100 Hydraulic Copy Lathe with NC(PLC) Control and Spiral/Twist attachment. Capacity: 3,100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. Equipped with: -- Hydraulic Copier with 6" (150 mm) tracing stroke. -- Spindle/carriage drive: 5.5 HP (4 KW) spindle drive motor, electronic variable spind... more
1
Hans Schreiner lathe MC1100-400, good condition, standard equipment, 0, 55kW, reserved 400V, 128 kg, 1100 mm centre distance, 185 mm SpitzenhöhePreisänderungen, subject to mistakes, printing, and typographical errors Bbrvkj0iib more


copy wood ...
daily

New machines via email!

Stay updated!

to

to

Edit search
COPY WOOD LATHE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close