Used Cronosstech Pkh-65 for sale (130)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 4 kW (5.44 HP), STANDARD EQUIPMENT Dcodpew Smhwefx Ah Uep Welded steel construction body Three-rolls driven by motors Hardened and ground shafts made from special high-strength material Horizontal and vertical working positions Hardened standard rolls Movable control panel separate from machine body Three-way adjustable mechanical manual side supports Precise bending with braked motor Digital displays (2 units) OPTIONAL EQUIPMENT Rolls for pipe and profile bending Optional two-axis hydraulic side supports Automation with NC control TECHNICAL SPECIFICATIONS Upper Shaft Diameter: 60 mm Lower Shaft Construction: 50 mm Roll Diameter: 180 mm Working Speed: 6 m/min Motor Power: 3.75 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports Dcodpfxsxircge Ah Usp OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 8 kW (10.88 HP), STANDARD EQUIPMENT Welded steel construction body Three-roll drive by motor Shafts made from special high-strength, hardened, and ground material Dcedpow Smi Isfx Ah Usp Horizontal and vertical working positions Hardened standard roll sets Movable control panel separate from the body Manually adjustable mechanical side guides with 3-way movement Precise bending with motor brake Digital displays (2 units) OPTIONAL EQUIPMENT Pipe and profile bending roll sets Optional 2-axis hydraulic side guides Automation with NC control TECHNICAL SPECIFICATIONS Roll Shaft Diameter: 100 mm Roll Diameter: 315 mm Working Speed: 7 m/min Motor Power: 7.5 kW Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight: 3650 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 5 kW (6.80 HP), STANDARD EQUIPMENT Welded steel construction body Three rollers with motor drive Shafts hardened and ground from special high-strength material Horizontal and vertical working position Hardened standard rolls Movable control panel separated from the main body Manually adjustable mechanical side supports movable in 3 directions Precision bending with braked motor Two digital indicators OPTIONAL EQUIPMENT Rolls for bending pipes and profiles Optional 2-axis hydraulic side supports Automation via NC control TECHNICAL SPECIFICATIONS Upper shaft diameter: 80 mm Lower shaft diameter: 70 mm Roll diameter: 245 mm Working speed: 7 m/min Motor power: 4.75 kW Length: 1500 mm Djdpfjw Smibox Ah Ujcp Width: 1000 mm Height: 1400 mm Weight: 1645 kg

Condition: new, Year of construction: 2024, pipe diameter (max.): 65 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, total length: 4,950 mm, total width: 1,250 mm, total height: 1,600 mm, warranty duration: 12 months, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, MAXIMUM CAPACITY : Ø65X3MM MAXIMUM BENDING RADIUS : 250MM DEGREE OF TWIST : 190 DEGREE WORKING LENGTH : 3000MM MOTOR POWER : 15.5KW LENGTH : 4950MM WIDTH : 1250MM HEIGHT : 1600MM BENDING SPEED : CHANGEABLE Dedpfsu Hi Rqjx Ah Uocp STANDARD FEATURES One set of bending molds in the dimensions required by the customer Servo Motorized Feed Axis Servo Motorized Rotation Axis Automatic Mailing of Detailed Work Report Servo Bending Axis (SFB 38-CNC/R1) Gearbox Driven Bending System (51-65-76-90) CNC Control Unit with mobile 21" color screen 3D Simulation Twisting Displaying Daily, Weekly and Monthly Total Production Amount Calculating the total length of material to be used Calculate the estimated bending process time Convert X-Y-Z data to Y-B-C Getting remote assistance Portable foot pedal with emergency stop Manual - Automatic Twisting Bending with - Without Bending Safety plate with switch behind the bending head Automatic headstock lubrication system (SFB 38 CNC/R1) Hydraulic Crimping Hydraulic Malafa Hydraulic Stop Hydraulic Oil Cooler Hydraulic Linear Slider system Hydraulic Clamp Electrical panel safety lock and keyed panel lock Electric Panel Cooler Protected Against Overload

Condition: new, Year of construction: 2025, Body designed with light steel structure, easily transportable anywhere. Ideal for aluminum, copper, and steel materials. With the cutting attachment, sheet slitting and cutting can be performed with ease. The attachment can be removed quickly when needed. Capacity (mm): 0.8 Dcsdpfexlcc Njx Ah Ujp Bending Angle (°): 130 Working Length (mm): 2650 Dimensions LxWxH (mm): 2550x750x850 Weight (kg): 350

Condition: new, Year of construction: 2025, throat depth: 320 mm, table width: 920 mm, table length: 660 mm, pressing force: 160 t, ram bore: 55 mm, power: 15 kW (20.39 HP), punching force: 160 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction frame • 4-sided supported guideways • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Automatically adjustable stroke (for 150–300 ton models) • Light curtain safety barrier • PLC control system • Touchscreen LCD display (for 150–300 ton models) • Dual hand pedal control system • Mechanical safety lock system • Hydraulic safety system (for 200–300 ton models) • Emergency reverse motor operation • Compliant with occupational safety regulations • Vibration damping pads • CE certification • Country of origin: Turkey • Warranty period: 24 months TECHNICAL SPECIFICATIONS: Type: C-type monoblock frame Capacity: 160 tons Throat depth: 320 mm Distance table to ram: 500 mm Distance between slide and table: 540 mm Distance between walls: 500 mm Ram adjustment: 120 mm Approximate press width: 1,600 mm Approximate press depth: 2,280 mm Approximate press height: 2,750 mm Front anchoring dimension: 840 mm Side anchoring dimension: 1,300 mm Diameter of table hole: 220 mm Table size: 660 / 920 mm Djdpfx Asvtywdeh Ujcp Die fixture slot diameter: 55 mm Ram size: 600 / 290 mm Table height from floor: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1,450 rpm Approximate weight: 7,100 kg • As the manufacturer, we can modify technical specifications upon request.

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, pressing force: 300 t, stroke length: 200 mm, power: 30 kW (40.79 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction frame,  Stress relief for the frame and welded parts by vibration,  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards,  Pneumatic clutch and brake combination – OMPI-Italy,  Slide ram supported on 8 guides,  Ram, connecting rod, and slide are made from GS52 steel casting,  High strength one-piece crankshaft – 4140,  With spare table,  Table-to-ram adjustment with ratchet device,  Automatic central lubrication,  Hydraulic overload protection,  Pneumatic pedal with locking mechanism and time-adjusted dual-hand control,  Electric counter,  PLC application and touch screen – DELTA,  Electrical switchgear – SIEMENS-SCHNEIDER,  Double-solenoid safety valve – GPA, TOPAIR,  CE compliance,  Finger protection light barriers – SICK, LEUZE, KEYENCE,  Safety PLC (controls all electrical systems, valves, dual-hand and pedal controls) – PILZ,  Position switch with lock and control panel,  Safety block,  Protective guards within CE standards. TYPE A TYPE MONOBLOCK FRAME Capacity 300 Ton Throat Depth 370 mm Table-to-Ram Distance 530 mm Ram-to-Table Max Distance 650 mm Distance Between Walls 600 mm Ram Adjustment 150 mm Approx. Press Width 1300 mm Approx. Press Depth 2700 mm Approx. Press Height 3200 mm Front Anchor Dimension 1000 mm Side Anchor Dimension 1440 mm Table Bore Diameter 260 mm Table Size 700 x 1200 mm Die Clamping Slot Diameter 60 mm Ram Size 780 x 400 mm Floor-to-Table Height 810 mm Stroke Adjustment 20 – 200 mm Strokes per Minute 38 spm Dsdpfx Ahexrk Hvo Uscp Motor Power 30 + 2.2 kW Motor Speed 1450 rpm Approximate Weight 15,000 kg

Condition: new, Year of construction: 2026, throat depth: 350 mm, table width: 700 mm, table length: 1,100 mm, pressing force: 250 t, stroke length: 160 mm, power: 22 kW (29.91 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body,  Stress relief of the body and welded components by vibration,  Parallelism and perpendicularity tolerances between tables compliant with ISO and DIN standards,  Pneumatic clutch and brake combination – OMPI-Italy,  Ram supported by 8 guides,  Components such as ram, connecting rod, and slide, made of cast steel GS52,  High-strength, solid crankshaft – 4140,  Equipped with spare bolster plate,  Ratchet-type bed-ram adjustment mechanism,  Automatic central lubrication system,  Hydraulic overload protection,  Pneumatic pedal with locking and time-controlled two-hand operation,  Electrical counter included,  PLC application and touchscreen – DELTA,  Electrical switchgear components – SIEMENS-SCHNEIDER,  Double-coil safety valve – GPA, TOPAIR,  CE compliance,  Light curtain guards for finger protection – SICK, LEUZE, KEYENCE,  Safety PLC (controls the entire electrical system, valves, two-hand and pedal operations) – PILZ,  Locked position switch and electric panel,  Safety block,  Protective guards in accordance with CE regulation. TYPE: A TYPE MONOBLOCK FRAME Capacity: 250 Tons Throat Depth: 350 mm Bed-to-Ram Distance: 520 mm Slide-to-Table Distance: 630 mm Distance Between Walls: 640 mm Ram Adjustment: 150 mm Approx. Press Width: 1300 mm Approx. Press Depth: 2500 mm Approx. Press Height: 3200 mm Front Anchorage Measurement: 980 mm Side Anchorage Measurement: 1430 mm Table Bore Diameter: 250 mm Dedpjxrkz Tofx Ah Uocp Table Size: 700 / 1100 mm Die Clamp Slot Diameter: 60 mm Ram Size: 670 / 380 mm Floor-to-Table Height: 810 mm Stroke Adjustment: 20 / 160 mm Strokes per Minute: 40 spm Motor Power: 22 + 2.2 kW Motor Speed: 1450 RPM Approximate Weight: 113,500 kg

Condition: new, Year of construction: 2026, throat depth: 340 mm, table width: 680 mm, table length: 1,000 mm, pressing force: 200 t, stroke length: 140 mm, power: 18.5 kW (25.15 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body  Stress relief of body and welded parts by vibration  Parallelism and perpendicularity tolerance between tables according to ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 8 slideways  Ram, connecting rod, and parts such as slide block made of steel casting, GS52  High-strength monobloc crankshaft – 4140  With spare bolster  Table-to-ram adjustment with ratchet device  Automatic central lubrication  Hydraulic overload protection  Pneumatic pedal with latch and dual-hand control with timer  Electric counter  PLC system and touch panel – DELTA  Electrical switchgear – SIEMENS-SCHNEIDER  Dual-coil safety valve – GPA, TOPAIR  CE compliant Dcsdpfjxrkztox Ah Ujp  Light curtain finger protection barriers – SICK, LEUZE, KEYENCE  Safety PLC (Controls all electrical systems, valve, dual-hand and pedal controls) – PILZ  Lockable position switches and control panel  Safety block  Protective guards included as per CE regulations TYPE: A TYPE MONOBLOC BODY Capacity: 200 Tons Throat Depth: 340 mm Table–Ram Distance: 500 mm Slide–Table Distance: 600 mm Distance Between Side Walls: 620 mm Ram Adjustment: 130 mm Approx. Press Width: 1200 mm Approx. Press Depth: 2400 mm Approx. Press Height: 3100 mm Front Anchorage Dimension: 970 mm Side Anchorage Dimension: 1420 mm Bolster Hole Diameter: 240 mm Bolster Size: 680 / 1000 mm Die Mounting Slot Diameter: 60 mm Ram Size: 620 / 350 mm Floor to Table Height: 805 mm Stroke Adjustment: 20 / 140 mm Strokes per Minute: 50 spm Motor Power: 18.5 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 11,500 kg

Condition: new, Year of construction: 2026, throat depth: 320 mm, table width: 660 mm, table length: 920 mm, pressing force: 150 t, stroke length: 125 mm, power: 15 kW (20.39 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body,  Stress relief for the body and welded parts via vibration,  Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Slide guided by 8 bearings  Components such as ram, connecting rod, and ram nose made of cast steel, GS52  High-strength monoblock crankshaft – 4140  Equipped with spare table,  Ratchet device table-to-ram adjustment  Automatic central lubrication system,  Hydraulic overload protection  Pneumatic pedal with latch and dual-hand control with timer,  Electric counter,  PLC system and touchscreen – DELTA  Electric switchgear components – SIEMENS-SCHNEIDER  Double-solenoid safety valve – GPA, TOPAIR  CE compliance  Finger safety light curtains – SICK, LEUZE, KEYENCE  Safety PLC (controls all electrical systems, valves, dual-hand and pedal controls) – PILZ  Locked position switch and control panel,  Safety block,  Protective guards in compliance with CE regulations. Dcodsxrkvqjpfx Ah Uep TYPE A TYPE MONOBLOCK BODY Capacity 150 Ton Throat Depth 320 mm Table-to-Ram Distance 500 mm Slide-to-Table Distance 540 mm Distance Between Side Frames 600 mm Ram Adjustment 120 mm Approx. Press Width 1100 mm Approx. Press Depth 2280 mm Approx. Press Height 2900 mm Front Anchorage Size 890 mm Side Anchorage Size 1300 mm Table Bore Diameter 220 mm Table Dimensions 660 / 920 mm Die Mounting Slot Diameter 55 mm Ram Dimensions 600 / 290 mm Floor-to-Table Height 805 mm Stroke Adjustment 10-125 mm Strokes per Minute 50 s.p.m. Motor Power 15 kW Motor Speed 1450 RPM Approximate Weight 9,500 kg

Condition: new, Year of construction: 2025, throat depth: 310 mm, table width: 630 mm, table length: 820 mm, pressing force: 125 t, stroke length: 125 mm, power: 11 kW (14.96 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body Dcodpfxjxrkt Ns Ah Usp  Stress relief of the body and welded components by vibration  Table parallelism and squareness tolerance in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram guided on 8 slides  Components such as ram, connecting rod, and ram adapter (die holder) are made of cast steel GS52  High-strength monoblock crankshaft – 4140  With spare bolster plate  Ram adjustment with ratchet mechanism  Automatic central lubrication system  Hydraulic overload protection  Pneumatic foot pedal with interlock and dual-hand control with timer  Electric counter  PLC system with touchscreen – DELTA  Electrical switchgear components – SIEMENS-SCHNEIDER  Dual-coil safety valve – GPA, TOPAIR  CE conformity  Light curtain finger protection barriers – SICK, LEUZE, KEYENCE  Safety PLC (controls the entire electrical system, valve, dual-hand control, and pedal) – PILZ  Position interlock switch and control panel  Safety block  Protective guards in compliance with CE standards TYPE: A TYPE MONOBLOCK BODY Capacity: 125 Ton Throat Depth: 310 mm Table-to-Ram Distance: 500 mm Slide-to-Table Distance: 510 mm Distance Between Walls: 540 mm Ram Adjustment: 100 mm Press Width: 1100 mm Press Depth: 2200 mm Press Height: 2700 mm Front Anchoring Dimension: 840 mm Side Anchoring Dimension: 1250 mm Table Hole Diameter: 210 mm Table Size: 630 / 820 mm Die Clamping Slot Diameter: 55 mm Ram Size: 500 / 250 mm Table Height from Floor: 785 mm Stroke Adjustment: 10 / 125 mm Strokes per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 RPM Weight: 7,800 kg

Condition: new, Year of construction: 2026, throat depth: 300 mm, table width: 600 mm, table length: 780 mm, pressing force: 100 t, power: 11 kW (14.96 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body,  Stress relief by vibration will be applied to the body and welded components.  Table-to-table parallelism and perpendicularity tolerances according to ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram guided by 8 sliding guides  Components such as ram, connecting rod, and slide block made of cast steel, GS52  High strength one-piece crankshaft – 4140  Equipped with spare table  Table-ram adjustment with ratchet device  Automatic central lubrication  Hydraulic overload protection  Pneumatic pedal with latch and time-controlled dual hand control  Electric counter  PLC system and touch screen – DELTA  Electrical switchgear – SIEMENS-SCHNEIDER  Double solenoid safety valve – GPA, TOPAIR  CE compliance  Finger guard light curtains – SICK, LEUZE, KEYENCE  Safety PLC (controls the entire electrical system, valves, dual-hand and pedal) – PILZ  Position switch with lock and control panel  Safety block  Protective enclosures within CE scope. TYPE: MONOBLOCK BODY, TYPE A Dedpfxoxrktio Ah Uecp Capacity: 100 tons Throat Depth: 300 mm Table-to-Ram Distance: 450 mm Distance Between Slide and Table: 465 mm Distance Between Side Walls: 500 mm Ram Adjustment: 85 mm Approx. Press Width: 1000 mm Approx. Press Depth: 1900 mm Approx. Press Height: 2500 mm Front Anchor Size: 760 mm Side Anchor Size: 1135 mm Table Hole Diameter: 200 mm Table Dimensions: 600 / 780 mm Die Clamping Slot Diameter: 50 mm Ram Size: 405 / 240 mm Floor-to-Table Height: 775 mm Stroke Adjustment: 10 / 110 mm Strokes Per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 RPM Approximate Weight: 5,700 kg

Condition: new, Year of construction: 2026, throat depth: 260 mm, table width: 520 mm, table length: 720 mm, stroke adjustment: 100 mm, pressing force: 60 t, stroke length: 100 mm, power: 4 kW (5.44 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body,  Vibrational stress relief will be applied to the body and welded components.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Slide guided ram (8-point slide guidance)  Components such as ram, connecting rod, ram nose are made from cast steel, GS52  High-strength monoblock crankshaft – 4140  Equipped with spare bolster plate  Ratchet device for table-to-ram adjustment  Automatic central lubrication  Hydraulic overload protection  Pneumatic pedal with latching, and dual-hand control with timer  Electric counter  PLC application and touch screen – DELTA  Electrical switchgear – SIEMENS-SCHNEIDER  Dual-coil safety valve – GPA, TOPAIR  CE certification  Light curtain finger protection barriers – SICK, LEUZE, KEYENCE  Safety PLC (controls the entire electrical system, valve, dual-hand, and pedal) – PILZ  Position-locked limit switch and electrical panel  Safety support block  Protective guards in accordance with CE requirements TYPE: A TYPE MONOBLOCK FRAME Capacity: 60 tons Throat Depth: 260 mm Table to Ram Distance: 360 mm Slide to Table Distance: 395 mm Distance Between Side Frames: 440 mm Ram Adjustment: 70 mm Approx. Press Width: 800 mm Approx. Press Depth: 1450 mm Approx. Press Height: 2100 mm Front Anchor Dimensions: 680 mm Side Anchor Dimensions: 875 mm Table Hole Diameter: 150 mm Table Size: 520 / 720 mm Die Clamp Slot Diameter: 40 mm Ram Size: 340 / 220 mm Floor to Table Height: 730 mm Stroke Adjustment: Add. 95 mm Strokes per Minute: 55 spm Motor Power: 4 kW Motor Speed: 1450 rpm Djdpfx Asxrkr Soh Uecp Approximate Weight: 3,500 kg

Condition: new, Year of construction: 2025, table width: 400 mm, table length: 4,500 mm, pressing force: 400 t, stroke adjustment: 100 mm, warranty duration: 24 months, stroke length: 60 mm, Equipment: safety light barrier, Our presses and feeding lines, developed for the door and window accessories industry, feature both double and single operation, and are designed to provide maximum efficiency and reliable long-term operation. In the window accessories sector, where high-volume production is essential, our presses, combined with our expertise, ensure maximum customer satisfaction. - Press force up to 400 tons - Table length up to 6000 mm - 2 and 3 connecting rod options - Automatic continuous fine lubrication with return Djdpfjxrbpnjx Ah Uecp - Progressive lubrication block - Accessible from both front and rear sides - Magnetic sensor sliding covers - Induction-hardened and ground gears - Gear-hub connections via conical locking PRESSURE: 400 TON SPEED: 40-70 RPM STROKE: 60 MM MAXIMUM DIE HEIGHT: 340MM TABLE-RAM HEIGHT: 400MM STROKE ADJUSTMENT: 100MM UPPER TABLE DIMENSIONS: 500X4500MM LOWER TABLE DIMENSIONS: 400X4500MM MOTOR: 30 KW MOTOR SPEED: 3000 RPM

Condition: new, Year of construction: 2026, table width: 400 mm, table length: 4,200 mm, pressing force: 300 t, stroke adjustment: 100 mm, warranty duration: 24 months, stroke length: 60 mm, Equipment: safety light barrier, Our presses and feeding lines, designed for the door and window accessories industry and featuring both dual and single operation modes, guarantee maximum efficiency and reliable operation for many years. In the window accessories sector, where high-volume production is essential, our presses—combined with our extensive experience—ensure maximum customer satisfaction. - Pressing force up to 400 tons - Table length up to 6000 mm - Choice of 2 or 3 connecting rods - Automatic, continuous fine lubrication with return - Use of progressive lubrication block Dsdpexrbn Rsfx Ah Ujcp - Accessible from both rear and front - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections using tapered lock system PRESSURE: 300 TON SPEED: 40-70 RPM STROKE: 60 MM MAXIMUM DIE HEIGHT: 340 MM TABLE-RAM HEIGHT: 400 MM ADJUSTMENT: 100 MM UPPER TABLE SIZE: 400x3000 MM LOWER TABLE SIZE: 400x4200 MM MOTOR: 22 KW MOTOR SPEED: 3000 RPM

Condition: new, Year of construction: 2026, table width: 400 mm, table length: 4,200 mm, pressing force: 200 t, stroke adjustment: 60 mm, warranty duration: 24 months, stroke length: 60 mm, Equipment: safety light barrier, These presses and feeding lines, engineered for the door and window accessories sector and offered with both single and double operation capability, guarantee long-term, high-efficiency performance. In the window accessories industry—where high-volume production is essential—our presses, combined with our expertise, ensure maximum customer satisfaction. - Pressing force up to 400 tons - Table length up to 6000 mm - 2- or 3-connecting rod options - Automatic, constant fine lubrication with continuous return - Progressive lubrication block use - Front and rear press access - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections with conical locking PRESS: 200 TON STROKES: 40-70 RPM STROKE LENGTH: 60 MM MAXIMUM DIE HEIGHT: 340MM TABLE-RAM HEIGHT: 400MM ADJUSTMENT RANGE: 100MM TOP TABLE DIMENSIONS: 400X3000MM BOTTOM TABLE DIMENSIONS: 400X4200MM Djdoxrbmyspfx Ah Uscp MOTOR: 18.5 KW MOTOR SPEED: 3000 RPM

Condition: new, Year of construction: 2025, Welded, robust bodies made of high-quality steel Easy manual material holding thanks to foot lock pedal operation Compliant with EU Safety Directives (CE Marked) User manual Dcsdpfx Ahjxlnpus Ujp Working length: mm 7020 Bending angle: 135° Capacity (black sheet): mm 1 Main motor power: kW 2.2 Length: mm 7600 Width: mm 1000 Height: mm 1350 Weight: kg 31000

Condition: new, Year of construction: 2025, Welded, robust frames made from high-quality steel Djdpfx Ahexlnnwj Uocp Operation with foot lock pedal allows easy manual holding of the material Conforms to EU Safety Directives (CE Marked) User manual Working length: mm 6020 Bending angle: 135° Capacity (mild steel): mm 1 Main motor power: kW 2.2 Length: mm 6800 Width: mm 1000 Height: mm 1350 Weight: kg 2700

Condition: new, Year of construction: 2025, STANDARD: Segmented blades with hardened Arkor coating Clamping and bending controlled by joystick Bending angle adjustment with mechanical protractor Manual backgauge Optional: Foot pedal and electrical panel Digital display NC controlled backgauge Motorized backgauge Working length: 3020 mm Bending angle: 135° Capacity (mild steel): 2 mm Clamping motor: 0.55 kW Dcedpfxoxlnmas Ah Uep Bending motor: 2.2 kW Length: 3230 mm Width: 1100 mm Height: 1260 mm Weight: 2650 kg

Condition: new, Year of construction: 2025, STANDARD: Segmented blades with hardened Arkor coating Clamping and bending control via joystick Dcsdpfx Ahexlnh Rj Uep Bending angle adjustment with mechanical protractor Manual backgauge OPTIONAL: Foot pedal and electrical panel Digital display NC-controlled backgauge Motorized backgauge 2520×2.5 Working length mm: 2520 Bending angle: 135° Capacity (mild steel) mm: 2.5 Clamping motor kW: 0.55 Bending motor kW: 2.2 Length mm: 2730 Width mm: 1100 Height mm: 1260 Weight kg: 2250

Condition: new, Year of construction: 2025, STANDARD: Hardened segmented blades with Arkor coating Joystick control for clamping and bending Bending angle adjustment with mechanical protractor Manual backgauge OPTIONAL: Foot pedal and electrical panel Digital display NC-controlled backgauge Motorized backgauge Dedpjxlclkjfx Ah Uocp 2020×3 Working length (mm): 2020 Bending angle: 135° Capacity (mild steel, mm): 3 Clamping motor (kW): 0.55 Bending motor (kW): 2.2 Length (mm): 2200 Width (mm): 1100 Height (mm): 1260 Weight (kg): 1750

Condition: new, Year of construction: 2025, STANDARD: Hardened, segmented blades with Arcor coating Clamping and bending via joystick control Bending angle adjustment with mechanical protractor Dcsdpfx Ahjxlckyj Uep Manual back gauge Optional: Foot pedal and electrical control panel Digital indicator NC-controlled back gauge Motorised back gauge Specifications: Working length: 1520 mm Bending angle: 135° Capacity (mild steel): 3.5 mm Clamping motor: 0.55 kW Bending motor: 2.2 kW Length: 1710 mm Width: 1100 mm Height: 1260 mm Weight: 1350 kg

Condition: new, Year of construction: 2025, STANDARD: Segmented blades with hardened Arkor coating Clamping and bending via joystick control Dcjdpfxexlci No Ah Uop Bending angle adjustment with mechanical protractor Manual back gauge Optional: Foot pedal and electrical panel Digital display NC-controlled back gauge Motorized back gauge 1270×4 Working length mm: 1270 Bending angle: 135° Capacity (mild steel) mm: 4 Clamping motor kW: 0.55 Bending motor kW: 1.1 Length mm: 1380 Width mm: 1100 Height mm: 1260 Weight kg: 950

Condition: new, Year of construction: 2025, STANDARD: Segmented blades with hardened Arkor coating Clamping and bending controlled by joystick Bending angle adjustment with mechanical compass Manual backgauge Dodpfexlcicex Ah Uscp OPTIONAL: Foot pedal and electric control panel Digital display NC-controlled backgauge Motorized backgauge 1020×4.5 Working Length mm 1020 Bending Angle 135° Capacity (mild steel) mm 4.5 Clamping Motor kW 0.55 Bending Motor kW 1.1 Length mm 1160 Width mm 1100 Height mm 1260 Weight kg 750