Used Cross Wedge Rolling Machine for sale (70,396)

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Fsdpfsdx Suhex Ahnjgc Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Fgjdey Ehk Iepfx Ahnsc Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Fgedjy Ugtajpfx Ahnoc Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11/10575, working width: 3,000 mm, sheet thickness (max.): 16 mm, TECHNICAL DETAILS Sheet metal width: 3,000 mm Sheet metal thickness: 16 mm Control system: conventional MACHINE DETAILS Fedezapqwopfx Ahnegc Rated current: 63 A Voltage: 380 V

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Fedpfx Ahofnk Ehsnogc Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Year of construction: 1983, condition: used, machine/vehicle number: 3604.1, Clamping surface for workpiece device: 230 x 500 mm Installation height between table and punch holder adjustable: 160 - 400 mm Projection to the center of the punch: 130 mm Fedpjcxb Nmofx Ahnogc Stamp working stroke: 40 - 250 mm Punch pressing force max .: 40 kN Stamp speed: 7.5 m / min max.working stroke: 2300 / h electr. Connection: 380 V, 1 kW Weight approx .: 620 kg Required space: 1030 x 850 x 2060 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Fgedszb Imaepfx Ahnec Type RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Fjdpfozcpu Usx Ahnjgc Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 Fgedpexdigfofx Ahnoc - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Fjdou Tg Spopfx Ahnsgc Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: good (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 700 kg, year of last overhaul: 2023, Head machine Fortuna KM 5 Head machine Fortuna, Model: KM 5 Fgjdpfxozbz E No Ahnjc VATW, 5-row Weight range approx.: from 30 to 80 grams Dough dividing and rounding machine with spreading belt Connection: 400V, 16A-CEE plug Used machine

Condition: good (used), functionality: fully functional, input voltage: 400 V, working width: 320 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 07/2027, type of input current: three-phase, Lippelt Mini Rustica roll production line for all types of specialty rolls Fgjdsyy Scqspfx Ahnec stainless steel design simple and efficient production of square dough pieces machine is mobile connection: 400V, 16A-CEE plug dimensions approx.: L 2300 x W 750 x H 1370 mm used machine Optional: Rumo seed dispensing unit maintenance contract delivery service training and commissioning We have many other machines in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, total width: 7,680 mm, total length: 1,490 mm, total height: 3,000 mm, type of input current: three-phase, Fortuna Premium K roll production line Fortuna combined roll production line Heading machine, dough divider and shaping machine Primus, 4-row, manufactured in 2019 Fjdpfx Ahjyv Uwpsnogc with spreading belt, proofing cabinet with lateral discharge Transfer device Stainless steel design Connection: 400V, 16A CEE plug Dimensions approx.: 7680 x 1490 x 3000 mm (W x D x H) Used machine

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, type of input current: three-phase, overall weight: 1,000 kg, König Rex T5S Depositing Machine Depositing machine for dough portions and forming machine robust technology weight range approx. from 30 to 85 grams with discharge conveyor connection 400V, 16A-CEE plug used machine Visit our large bakery machine warehouse! Fjdpsyaklisfx Ahnsgc

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, total width: 1,740 mm, total length: 815 mm, total height: 1,650 mm, type of input current: three-phase, Roll forming line Lippelt Mini-Rustica GST Head machine for square specialty rolls Model: Mini-Rustica GST with guillotine and punching device including 2 longitudinal cutting rollers, 3 and 4 rows Band mehler for infeed belt Touchscreen control Stainless steel design Rumo seed station Machine is mobile Fgsdpfx Aoyv U Eaehnjc Connection 400V, 16A CEE plug Dimensions: 1740 x 815 x 1650 mm, WxDxH Used machine

Condition: new, sheet thickness: 1.8upper roll diameter: 70messurements (LxWxH): 1650 x 700 x 1160prebending: 1.5motor: 1,1sheet length: 1050 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Fsdpfx Ahed Ab T Renogc Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 274,-- - Hardened rolls EURO 392,-- - Variable speed of Rotation We have many references!

Condition: new, neu Fgjdsy Dvlkjpfx Ahnec ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 11800 € 226.56 € 1050 mm 5 mm Fgsdpfxsynngts Ahnoc 130 mm 3,5 m/min 2.2 kW 2200 mm 750 mm 1000 mm 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 13200 € 253.44 € 1270 mm 5 mm Fedpfjynm Dwsx Ahnogc 140 mm 3,5 m/min 2.2 kW 2470 mm 750 mm 1000 mm 1350 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 6700 € 129.31 € 1270 mm 2.5 mm 90 mm 6 m/min 1.1 kW 1850 mm 700 mm 1200 mm 520 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch Fedpfxjynm D Ds Ahnegc conical rolling device user manual in GERMAN or ENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 12300 € 236.16 € 1270 mm 4 mm 120 mm 3 m/min 2.2 kW 2470 mm 750 mm 1000 mm 1110 kg 3 rolls Fgedpfx Aoynm Dqehnsc asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 10500 € 201.6 € 1050 mm 4 mm 110 mm 2.2 kW 1100 mm 750 mm 1000 mm 990 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Fjdpfx Ajynm Dkohnogc Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 13400 € 257.28 € 1550 mm 3 mm 110 mm 3 m/min 2.2 kW 2700 mm 750 mm 1000 mm 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Fgjdpfeynmzvox Ahnsc Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 24500 € 470.4 € 1550 mm 4.5 mm 4.5 mm 3.5 mm 4.5 mm Fjdpfx Asynmwdjhnjgc 3.5 mm 3.5 mm 2.5 mm 130 mm 130 mm 130 mm 5 m/min 2,2 + 1,1 kW 3300 mm 1150 mm 1110 mm 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 16600 € 318.72 € Fedoynmv Tepfx Ahnegc 2050 mm 4 mm 140 mm 2.2 kW 3200 mm 750 mm 1000 mm 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo)