Used Curve controlled for sale (30,171)

Cycle controlled CNC lathe

Call

Swing over bed 320 mm Swing diameter over slide 150 mm chuck diameter 200 mm face travel 185 mm Control Siemens Q9asv center distance 750 mm Speed range 1. 14 - 900 rpm Speed range 2. 56 - 3.550 rpm Dimension (L x W x H) 2.600 x 1.440 x 1.440 mm Weight 2.000 kg Tools included. Machine parameters deleted

more

Listing

HARRISON Alpha 460 plus (230 x 1500 mm) Fanuc

Staufenberg

7810 km

HARRISON Alpha 460 plus (230 x 1500 mm) Fanuc

1999

good (used)

Call

Cycle controlled CNC lathe make HARRISON type Alpha 460 plus Machine # P40072/069 Year of manufacture 1999 Technical data: Center width 1500 mm center height 230 mm Swing over bed 460 mm Swing over cross slide 270 mm Swing diameter in the crank 730 mm length of the crank 216 mm Spindle diameter 76 mm 3 infinitely variable speed ranges 20-225; 55-670; 155-2000 rpm. bed width 400 mm 12 metric feeds 0.03 - 0.4 mm/rev. 12 inch feeds 0.001 - 0.016 inch/rev Thread feeds metric all up to 14 mm Stg. in...

more

Listing

Ennepetal

7685 km

DMTG DALIAN MACHINE TOOL GROUP CKE 6180Z

2007

used

Call

turning diameter 0800 mm turning length 2000 mm control Fagor 8055 iT turning diameter over bed 0800 mm turning diameter over bed slide 490 mm spindle turning speed - stepless 40- 1000 U/min spindle bore 100 mm feed in x - axis 0- 4000 mm/min feed range Z-direction 0- 8000 mm/min voltage 400 V connected load 19 KW face slide travel 420 mm longitudinal travel 1835 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. 4,51 x 2 x 1,8 m Bcbhbejw Flat bed machine...

more

Listing

Tönisvorst

7630 km

SEIGER SLZ800 / 1500

2006

used

Call

turning diameter 800 mm turning length 1500 mm control SIEMENS SINUMERIK 810 Dpl workpiece weight flying clamped 750 workpiece weight with one steady 2200 kg swing diameter over face slide 540 mm power capacity 20/28 kW spindle bore 83 mm weight of the machine ca. 6 t dimensions of the machine ca. 3,5x2,8x2 m Ykuoxvuv gearbox must be checked!! machine without tailstock! -without tools -without jaws

more

Listing

8197 km

BOEHRINGER DUS 560x1500

1996

used

Call

turning diameter 560 mm turning length 1500 mm control SIEMENS 810D taper in tailstock-quill MK 5 Qut2p turning speeds 2500 U/min spindle bore 62 mm total power requirement 19 kW weight of the machine ca. 4 t dimensions of the machine ca. 3,8 x 1,8 x 1,9 m This BOEHRINGER DUS 560 is in very good condition

more

Listing

Erwitte

7722 km

HARRISON alfpha 550

1997

used

Call

turning diameter 554 mm turning length 1000 mm control Fanuc total power requirement 11 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 2,6 x 1,6 x 1,8 m HARRISON alpha 550 cycle lathe, used Controller: Fanuc Turning diameter: 554 mm Turning length: 1,000 mm Spindle passage: 90 mm Spindle: Speed (max.): 1,800 rpm Speed levels: 9 Power: 11kW Spindle passage (approx.): 90 mm Workpiece clamping: 3-jaw chuck, ø315 mm Tool carrier: Technology: quick-change holder on cross slide...

more

Listing

'Vanderlande' Rollenbahn | Rollenbahnkurven

Spanbroek

7462 km

Roller conveyor curve

'Vanderlande' Rollenbahn | Rollenbahnkurven

used

Call

Listing

Halberstadt

7855 km

MONFORTS KNC 8 S - 4000

2001

used

Call

Ref. -No.: 10313 Manufacturer: MONFORTS Bd3qn3jp8ci Type: KNC 8 S - 4000 Year of construction: 2001 Type of control: CNC Control: EUROTURN Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 164 01 Machine length: 6200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 7700 Kg (Ohne Späneförderer und Kühlmittelbehälter) t X stroke: 450 mm Z - stroke: 3850 mm Chuck diameter: 315/400/500 mm Turning Diameter: 630 mm Turning Length: 3000 mm Centre Dis...

more

Listing

Ennepetal

7685 km

Automated packaging line PLC controlled

CHALLENGER MICROTURN BNC 2280x2000

2010

used

Call

turning diameter 0550 mm turning length 2000 mm control Fagor 8055 iT turning dia. over face-slide 310 mm turret head 8 Pos. throat 790 x 283 mm bed width 405 mm max. workpiece weight between centers 2000 kg 0qcpbjlof spindle turning speed range 80- 3500 U/min spindle bore 82 mm cross movement 300 mm longitudinal travel 2150 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 15 m/min total power requirement 15/22 kW weight of the machine ca. 5 t dimensions of the machine ca. 4 x 2,4 x 2,4...

more

Auction

Calais

7379 km

Baron P-AF008191

2006

good (used)

21 days left

Details

Listing

Hessisch Lichtenau

7826 km

CNC cycle controlled lathe

HARRISON Alpha 400 Plus

1998

used

€12,000

Multi-spindle automatic cam-controlled lathe

Call

CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage ...

more

Listing

Baden-Württemberg, Deutschland

7969 km

Schütte SF 32

1988

good (used)

Call

Schütte SF 32 multi-spindle cam-controlled automatic lathe with loading magazine good condition short term available 9evul7zyhk

more

Listing

Spanbroek

7462 km

Roller conveyor curve

Budde Rollenbahnen | Rollenbahnkurven

used

Call

Listing

Halberstadt

7855 km

75000 liters temperature controlled storage tank made of V4A

MONFORTS KNC 8 S - 3000

1997

used

Call

Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1997 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t X stroke: 455 mm Jtk3n3h Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Spindle Head: DIN 55027 - 11x290 Feed Capac...

more

Listing

Bremen

(dealership location)

7667 km

ready for operation (used)

€49,700

Temperature controlled laboratory freeze

Call

General Manufacturer Ritter (HBB Hildesheimer Behälterbau) Location Outdoor storage Condition used Tank volume 75,000 liters Max. permissible operating temperature 85 °C Flooring dished bottom Construction type upright 37pogxrurn Heating/cooling jacket Heating/cooling available Volume double jacket 350.0 liters Max. permissible operating overpressure 4.0 bar Max. permissible operating temperature 55 °C Insulation insulation available insulation jacket welded material insulation jacket stainless ...

more

Listing

Hosenfeld

7857 km

Serail CF8-130

2020

like new (used)

Call

Temperature-controlled laboratory freezer for temperature-controlled, even freezing and thawing for e.g. B. plasma or proteins. The new device from 2022 is supplied with a refrigeration generator and control. Machine is immediately available. Bcfr2ozjlpw Please contact me for more information.

more

Listing

Oelde

7700 km

WEILER E 80 / 3000

2001

used

Call

turning diameter over bed 810 mm turning length 3.000 mm control Sinumerik 840 D Siemens swing diameter over face slide 510 mm radial face slide travel 410 mm travel upper slide 140 mm bed width 480 mm turning tool - shaft cross cut 32 x 25 mm Main spindle: turning speed range - main spindle 1 - 1.800 min/-1 transmission ratio 2 transmission ratio 1 1 - 450 min/-1 transmission ratio 2 4 - 1.800 min/-1 power capacity - main spindel 37,5 / 30 kW max. Torque 3.150 / 2.600 Nm spindle head Gr. 11 D...

more

Listing

Schlüchtern

7866 km

frequency-controlled drive motor

WEILER E110 X 3000

2013

excellent (used)

Call

Description - Power consumption 60/100% : 45KW/37KW - Control : Siemens Sinumerik 840D - weight: approx. 11000Kg - dimensions machine: L6750xW2667xH2900 mm - dimensions control cabinet: L2500xW500xH1600mm - chuck: wedge bar power chuck Rotas -S plus 400-102 from Schunk - spindle bore : 128mm - chuck bore : 102mm - Inner taper size 11 - Max. Diameter over bed : 1100mm - Max. Diameter over slide: 730mm - Max. Workpiece length: 2700mm - Max. Workpiece weight : 4500kg - Speed ranges: Stage1: 1-350r...

more

Listing

Minden

7714 km

Struckmeier DSB3-18.44-50I.4 1-MYKO-000

used

Call

performance 110 KW tension 400 V speed 1,500 to 5,000 rpm adjustable motor with - frequency converter - incremental encoder, line choke, network filter - external fan emergency stop device manual control unit *frequency converter:* type: VCD 4 S 160A AZ/NS serial number: BKQ4S160AN20A-1 737eauvto output: 207 KVA motor performance up to 160 KW total weight approx. 1,000 kg

more

Listing

Halberstadt

7855 km

280 liter temperature controlled pressure vessel made of V2A

MONFORTS KNC 8 S - 4000

2005

used

Call

Ref. -No.: 10369 Manufacturer: MONFORTS Type: KNC 8 S - 4000 Year of construction: 2005 Type of control: CNC Control: MTCK/Euro Turn Storage location: Halberstadt X stroke: 450 mm Z - stroke: 3850 mm Centre Distance: 3970 mm Cr0ntmi3t Feed Capacity - Z: 20,7 kN Feed Capacity - X: 10,1 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Circumference diameter over slideway: 830 mm Circumferential diameter ove...

more

Listing

Bremen

(dealership location)

7667 km

ready for operation (used)

€4,195

belt curve conveyor left 50°-740-550 IR700

Call

General Location Outdoor storage Condition used Tank volume 280 liters Max. Overpressure 2.5 bar Floors dished bottom Construction form upright Stand form Feet height adjustable Number of feet 3 pieces Heating/cooling jacket Heating/cooling available Insulation Insulation available Q03lx Technical data / dimensions Diameter inside 600 mm Diameter outside 780 mm Cylindrical height 1,000 mm Equipment Outlet 32 mm Remarks No guarantee for functionality of double jacket and agit...

more

Listing

7932 km

Transnorm

2001

used

€2,100

Transnorm conveying curve 45 degrees

Call

Transnorm belt curve conveyor left GF50°-740-550 IR700 RA1948 Technical data: Conveying length middle radius (NL): 851 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 200 mm Inner radius (IR): 700 mm Shg8n Conveying angle: 50° degrees support feet: optionally available Conveying speed (V m/s): 0,045-1,3m/s Drive: SEW gear motor Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports: ...

more

Listing

Hofheim am Taunus

7821 km

Transnorm 1600-105

2001

good (used)

€950

frequency-controlled drive motor

Call

approx. 2 pieces Transnorm conveyor curve 45 degrees - second-hand - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2001 Hgqrh8n Type: 1600-105 Nominal angle: 45 degrees Nominal belt / belt width: 80cm Belt type: KT 94 Nominal radius: 700mm width: approx. 95cm distance: outside / outside: approx. 2,10m inside / inside: approx. 0,83m SEW Motor

more

Listing

Wiesbaden

(dealership location)

7810 km

cycle controlled lathe

P.B.R. T 30 S-NC x 1500

1995

used

Call

circulation-Ø: ueber Bett 625 mm max. center distance: 1500 mm spindle boring: 105 mm spindle speed: 6,6 - 2000 rpm F9zyi3d space needed: 4400 x 2050 x 1820 mm weight: 5200 kg

more

Listing

Minden

7714 km

UNGERER 1 GG5118-0GK44-6VV1-Z

used

Call

performance 0.0540 up to 16.4 KW tension 28 - 420 V speed 10 to 3,000 rpm variable speed motor with - frequency converter Siemens with control SIMOREG K - external fan emergency stop device manual control unit Mwaxr *frequency converter:* type: SIMOREG K performance 6 KW up to 774 KW

more

Listing

Halberstadt

7855 km

75000 liters temperature controlled storage tank made of V4A

MONFORTS KNC 6 - 3000

2000

used

Call

Ref. -No.: 10366 Manufacturer: MONFORTS Type: KNC 6 - 3000 Year of construction: 2000 Type of control: CNC Control: EURO TURN Storage location: Halberstadt Country of origin: Deutschland Machine length: 5000 mm Machine width: 1970 mm Machine Height: 1800 mm X stroke: 370 mm Z - stroke: 2880 mm Chuck diameter: 200/250/315 mm Bzea8eb8uk Centre Distance: 3040 mm Spindle Head: DIN 55027 - 8x220 Feed Capacity - Z: 18,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 5 m / min Rapid Travel S...

more

Listing

Bremen

(dealership location)

7667 km

ready for operation (used)

€49,700

Belt curve conveyor 45° left

Call

General Manufacturer Ritter (HBB Hildesheimer Behälterbau) Location Outdoor storage Condition used Ghnlmhpvdj Tank volume 75,000 liters Max. permissible operating temperature 85 °C Flooring dished bottom Construction type upright Heating/cooling jacket Heating/cooling available Volume double jacket 350.0 liters Max. permissible operating overpressure 4.0 bar Max. permissible operating temperature 55 °C Insulation insulation available insulation jacket welded material insulation jacket stainless ...

more

Listing

7932 km

Transnorm GKF 45°-1370-1200 IR1100

2018

used

€4,250

Call

Transnorm belt curve conveyor left GKF 45°-1370-1200 IR1100 RA1937 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the ent...

more

Listing

Hofheim am Taunus

7821 km

Conveyor belt curve

Transnorm 1600-105

2008

excellent (used)

€1,750

Column-controlled band sawing semiautomatic

Call

Transnorm conveyor belt curve not quite 180 degrees - used - : Covtdowsy7 Belt Curve: Price (net): 1.750.-€ Manufacturer: Transnorm Special grade number Type: 1600 - 105 YEAR: 2008 Outside diameter approx. 3,30m Further data can be determined BC 074

more

Listing

Hessisch Lichtenau

7826 km

METORA HMB 380 DS

1993

used

€6,800

Small roller conveyor curve 90 degree

Call

Column guided bandsaw semi-automatic METORA type HMB 380 DS only for 90° cuts (Made in Austria) Machine. No. 4580028 Year of construction approx. 1993 Cutting range round Ø 380 mm Gcxfgtf square 380 x 380 mm saw band dimension 5650 x 34 x 1,1 mm saw band speed 25-108 m/min. infinitely variable material infeed height 870 mm drive power hydraulics 1,5 kW Drive power saw motor 4 kW Mains connection 400 Volt, 50 Hz - Fully hydraulic band saw in two-column design - Hydraulic saw bow lowering with ste...

more

Listing

Rottendorf

7935 km

TAF 1000000630

2023

new

€786

CNC - Lathe - cycle controlled

Call

Type: Small roller conveyor curve Curve 90 degrees , TAF Item no.: 100000630 Technical data Conveying width: 300 mm Angle: 90 Total height / conveying height: 80 mm (without supports) Total height / conveying height: 655 - 1,030 mm (incl. supports) Curve radius inside: 800 mm Curve radius outside: 1.100 mm 0gsmlq8m Roller pitch / center distance, inside: 22.5 mm Roller pitch / center distance, outside: 31 mm Load roller axis type: External thread, M8 Load roller per axis: 2 - 4 (depending o...

more

Listing

Halberstadt

7855 km

WEILER E90

1996

used

Call

Ref. -No.: 10367 Manufacturer: WEILER Type: E90 Year of construction: 1996 Type of control: CNC Control: Siemens Storage location: Halberstadt Country of origin: Germany Turning Speeds: 500 RPM Machine length: 7000 mm Machine width: 2300 mm Machine Height: 2600 mm Weight Of The Machine Ca.: 9,25 t Spindle Taper: 6 Mk Travel quill: 300 mm Bed width: 800 mm Turning Length: 3000 mm Turning Diameter Over Bed: 900 mm Swing Diameter Over Bed Slide: 530 mm Spindle Bore: 254 mm Spindle power: 45 kW Tai...

more

Listing

7932 km

Belt curve conveyor 70° right

Transnorm GKF 70°-730-550 IR600

2000

used

€2,650

Conveyor belt curve 45 degrees

Call

Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire...

more

Listing

Frankenberg/Sa.

8033 km

Transnorm Förderkurve 45 Grad

2010

good (used)

€950

Light duty roller conveyor curve 90 degr

Call

approx. 15 pieces Transnorm conveyor curve 45 degrees - used - : Bvnjppiscj Price per piece: 950.-€ (net), disassembled and loaded! Manufacturer: Transnorm year of construction: 2010 type: 1600-105 Nominal angle: 45 degrees Nominal belt width: 800mm Belt type: KT 96 Nominal radius: 900mm SEW engine Condition: good Available: immediately Location: Stock Frankenberg

more

Listing

Rottendorf

7935 km

TAF 1000000570

2023

new

€893

spiral helix belt curve conveyor right

Call

Type: Light duty roller conveyor curve 90 degree , TAF Item no.: 100000570 Technical data Technical data Conveyor width: 600 mm Angle: 90 Total height / conveying height: 80 mm (without supports) Total height / conveying height: 655 - 1.030 mm (incl. supports) Curve radius inside: 800 mm Curve radius outside: 1,400 mm Roller pitch / center distance, inside: 55 mm Roller pitch / center distance, outside: 89 mm Load roller axis type: External thread, M8 Load roller per axis: 2 - 4 (depending on...

more

Listing

Transnorm Transnorm GKF 90°-750-550 IR600

7932 km

Transnorm Transnorm GKF 90°-750-550 IR600

2001

used

€2,799

Dematic roller curve right or left 90° with...

Call

Transnorm spiral helix belt curve conveyor right 90°-840-650 IR600 RA1869 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks...

more

Listing

7932 km

Dematic 2315-600-540 IR795

2001

used

€2,600

belt curve conveyor 22,5° right

Call

Dematic roller curve right or left 90° with straight section 2315-600-540 IR795 RA1643 Gmd0iu3 Make: Dematic Running direction: 90° right running/ left running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm + 525 with straight section 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency conver...

more

Listing

7932 km

Transnorm GKF 22,5°-750-500 IR900

2001

used

€1,350

Belt curve conveyor 70° right

Call

Transnorm belt curve conveyor right GKF 22.5°-850-650 IR1200 RA1523 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a ...

more

Listing

7932 km

Transnorm GKF 1100-770-600 IR600

2001

used

€2,250

Lippert roller curve right or left 90°-570-500...

Call

Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks t...

more

Listing

7932 km

Lippert

2011

used

€1,550

spiral helix belt curve conveyor left 85°

Call

Lippert roller cam right or left 90°-570-500 IR765 RA1820 Bagvj7bmk Make: Lippert Running direction: 90° right running/ left running Roller width (RB): 500 mm conical, plastic coating Nominal/outer width (NB): 570 mm Inner radius (IR): 765 mm Side guides included on both sides Scope of delivery: without supports (please enquire if required) Optional Features: Running direction: links/ rechts Construction year: 2012 Antrieb: 2 Stück nominal voltage: 24V condition: good (used) Nominal / inn...

more

Listing

7932 km

Transnorm GKF 1703-775-550 IR600

2001

used

€2,699

Transnorm spiral helix belt curve conveyor...

Call

Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to ...

more

Listing

7932 km

Transnorm

2001

used

€2,799

belt curve conveyor 20° right

Call

Transnorm spiral helix belt curve conveyor right 90°-750-550 IR600 RA1492 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks...

more

Listing

7932 km

Transnorm GKF 640-750-550 IR1300

2001

used

€1,200

Call

Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a lo...

more

Listing

Transnorm Transnorm GKF 180°-750-550 IR1000

7932 km

belt curve conveyor left

Transnorm Transnorm GKF 180°-750-550 IR1000

2001

used

€5,300

Call

Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a lo...

more

Listing

Transnorm Transnorm GKF 180°-775-600 IR500

7932 km

belt curve conveyor left

Transnorm Transnorm GKF 180°-775-600 IR500

1999

used

€3,940

belt curve conveyor 45° left

Call

Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Tha...

more

Listing

7932 km

Transnorm GKF 680-750-550 IR700

2001

used

€2,100

Belt curve conveyor 70° right

Call

Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-...

more

Listing

7932 km

Transnorm GKF 1650-750-550 IR600

2001

used

€2,250

Belt curve conveyor 30° left

Call

Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to ...

more

Listing

7932 km

Transnorm GKF 759-750-550 IR900

2001

used

€1,947

Belt curve conveyor 90° right

Call

Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-...

more

Listing

7932 km

Transnorm GKF 90°-750-550 IR600

2001

used

€2,399

Transnorm belt curve conveyor right GKF...

Call

Transnorm belt curve conveyor 90° degree right GKF 90°-750-550 IR600 RA1408 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Than...

more

Listing

7932 km

Transnorm

2001

used

€1,947