Used Diaphragm Pump for sale (9,229)

Condition: good (used), Promoted by APEXPUMPS Bristol UK Dkedpfst A U H Iox Ahhow -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW

Condition: ready for operation (used), Year of construction: 2021, Nordson Hot Melt Glue Pump Type: MESA 6 Dkjdsy R Ecrepfx Ahhsw Year 2021 Power 200/240 V 50/60 Hz, 15/18 A Dimensions: 750 mm x 350 mm x 570 mm.

Condition: used, Grundfos Vertical Water Pump Complete with isolator valve Power isolator switch Dedsz E Nhvopfx Ahhekw 1.5 kw 5.7 m3/hr H max 60m

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor Dodjyzfh Aspfx Ahhjkw -Manufacturer: Axial Pump, hydraulic pump -Type: APVC-13 -Shaft: Ø 16 x 40 mm -Bolt circle: Ø 64 mm M6 -Dimensions: 245/200/H250 mm -Weight: 9.3 kg

Condition: used, functionality: fully functional, For sale: a used submersible pump with a capacity of 160 m³/h, powered by a 7.5 kW motor and operating on 380 V. Dkodpfx Ahs Aibrijhjw The pump has been inspected and is in full working order. Condition/defect: a crack in the outer part of the housing casting. The pump has been fully tested and confirmed to be working; this defect does not affect its operation.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Dkedpfxsy U U Tuj Ahhew Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Submersible slurry pump for drainage. Dkjdpfezcn Utex Ahhew

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: Dsdpfx Ae Aibq Njhhjkw • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: good (used), Busch Vacuum Pump Model 630 Dsdpfx Ahswa Nzqshekw 370 CFM

Condition: good (used), Busch Vacuum Pump Dodpfswa Ra Uex Ahhskw Model 400

Condition: good (used), Busch Vacuum Pump Dksdpfx Ahjwa Ucgshow Type: 400-212 235 CFM Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: good (used), Busch Vacuum Pump Model 400-212 Dksdpfx Aowa Unpshhjw

Condition: used, Year of construction: 2021, functionality: fully functional, KSB ETNV 100-080-315 INDUSTRIAL PUMP – VERTICAL SUBMERSIBLE ETANORM V Original KSB centrifugal pump | German production | Year 2021 | Robust industrial design For sale is a KSB ETNV 100-080-315 vertical industrial pump from the Etanorm V series, manufactured by the renowned German company KSB. This submersible pump is designed for technological installations, industrial tanks, and liquid transport and circulation systems. Its design with an extended shaft allows for vertical mounting with the drive located outside the pumped medium. The unit finds application in industries, production plants, cooling systems, and process installations. KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Manufacturer’s code: ETN-V-100-080-315 TECHNICAL DATA OF THE KSB PUMP Manufacturer: KSB SE & Co. KGaA – Germany Model: ETNV 100-080-315 Series: KSB Etanorm V Dkodpj Aia E Tefx Ahhow Design: GGSD Year of manufacture: 2021 Impeller diameter: Ø 334 mm Capacity: 135.99 m³/h Head: H 36.80 m (to be confirmed) Type: centrifugal pump, vertical, submersible Mounting: vertical, flanged Discharge nozzle: side, flanged Drive: external, via shaft and coupling Electric motor: not included Stock number: 1199 KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Brand: KSB ADVANTAGES AND CHARACTERISTICS ✔ Renowned KSB brand – German manufacturer of industrial pumps and valves. ✔ Vertical design – adapted for installation in tanks and technological installations. ✔ Centrifugal pump – a solution for transporting and circulating industrial liquids. ✔ Robust housing – durable construction with flanges, shaft, and coupling elements. ✔ External drive – possibility of cooperation with a suitably selected electric motor. ✔ Industrial applications – suitable for production, technological, and process installations. KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Type: Other APPLICATION OF THE KSB SUBMERSIBLE PUMP Industrial tanks and vats. Technological and production installations. Cooling and water circulation systems. Process liquid transport systems. Washing and degreasing installations. Industrial plants and maintenance. Pumping systems with vertical mounting. Selecting a pump for a specific liquid type and installation parameters requires checking the technical documentation. The item for sale is exactly the one shown in the photographs. The KSB Etanorm V pump is a proposition for industrial plants, pump service companies, maintenance departments, and companies looking for a vertical pump, a replacement unit, or a part for an industrial installation.

Condition: excellent (used), Year of construction: 2012, functionality: unexamined, For sale: KSB Sewabloc K 65-250 G V industrial pump with a 2.2 kW electric motor. Centrifugal pump, monobloc design, with flanged connections. Data from the nameplates: Manufacturer: KSB Model: Sewabloc K 65-250 G V Year of manufacture: 2012 Nominal flow rate: 6.22 l/s, approximately 22.4 m³/h Head at the nominal point: 8.05 m Dkedpfxo Aibg Hs Ahhow Motor power: 2.2 kW Power supply: 230 V Δ / 400 V Y, three-phase Frequency: 50 Hz Pump speed: 1455 rpm Impeller diameter: 170 mm Motor protection rating: IP55 Motor efficiency class: IE2 Unit weight according to the nameplate: approximately 103 kg Condition: used. Visible signs of use, localized paint chipping, and superficial surface corrosion. Appearance matches the photos. NOTE: THE STATED PRICE APPLIES TO ONE UNIT – ONE PUMP WITH MOTOR.

Condition: used, Year of construction: 2015, functionality: fully functional, KSB ETANORM GPV 150-125-250 GG INDUSTRIAL PUMP – VERTICAL CENTRIFUGAL PUMP, 200 m³/h Original KSB Etanorm GPV 150-125-250 GG centrifugal pump from the German manufacturer KSB, designed for industrial process systems, pumping systems, and liquid circulation. The robust vertical design with a volute casing and extended shaft allows the pump to be used in process tanks and industrial pumping systems. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump. Manufacturer's code: PV 150-125-250 GG. TECHNICAL SPECIFICATIONS Manufacturer: KSB Aktiengesellschaft – Germany Model: ETANORM GPV 150-125-250 GG Type: industrial, centrifugal, single-stage pump Design: vertical, tank-mounted, with volute casing Nominal flow rate Q: 200 m³/h (200,000 l/h) Head H: 20 m Rotational speed: 1477 rpm Impeller diameter: 255 mm Pump nominal size: 150-125-250 Material: GG – cast iron Year on nameplate: 2015 Stock designation: No. 1462 Condition: used, without electric motor Hydraulic data matches the pump nameplate. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump, KSB brand Djdj Aia E Espfx Ahhokw ADVANTAGES AND CHARACTERISTICS Original pump from a renowned industrial equipment manufacturer. High flow rate – 200 m³/h. Vertical design for installation in tank systems. Robust volute casing and centrifugal impeller. Flanged connections for process systems. Can be used as a replacement pump or a source of KSB spare parts. Design intended for use in industrial pumping systems. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump, other type. APPLICATIONS OF THE KSB ETANORM GPV PUMP Industrial pumps from the Etanorm GPV series are used in: industrial and production plants, liquid circulation and transport systems, process and technology tanks, industrial washing systems, flushing and degreasing systems, surface treatment systems, technological water circulation systems. Selecting the pump for a specific medium requires checking the material compatibility and operating parameters. TECHNICAL CONDITION – USED PUMP The offered KSB Etanorm GPV 150-125-250 pump comes from an industrial plant. The unit has traces of use and storage, including local corrosion on the impeller, shaft, and flange surfaces. The pump is equipped with a volute casing, impeller, shaft, vertical column, and mounting elements visible in the photos. The stock designation has the inscription "Einsatzbereit" (ready for use). The pump is functional after service in Germany.

Condition: used, functionality: unexamined, For sale: Flygt 2051.160 submersible pumps, designed for water pumping and drainage applications. Maximum capacity is 18 m³/h, which equals 18,000 liters per hour or 300 liters per minute. Actual capacity depends on the lift height and operating conditions. The stated price applies to one unit. The three pumps shown in the pictures are sold separately. Technical specifications: Manufacturer: Flygt Model: 2051.160 Maximum flow rate (Qmax): 18.0 m³/h – 18,000 l/h Power: 1 kW Rated voltage: 380/220 V Connection: star/delta Rated current: 2.4/4.1 A Three-phase motor Frequency: 50 Hz Rotational speed: 2850 rpm Operating mode: S1 – continuous operation Dkjdpfx Ahe Aibrfohew Power factor cos φ: 0.89 Insulation class: F Weight: approximately 25 kg Manufactured in: Sweden Equipment: Carrying handle Lower suction basket Side discharge nozzle with hose connection Power cord The pumps are used, with visible signs of wear, dirt, and paint coating damage. The visual condition and equipment are shown in the pictures. The item for sale is one pump. Price per unit.

Condition: used, functionality: fully functional, For sale: KSB KRTF 80-200/24 UH industrial submersible pump, designed for pumping wastewater and contaminated water. Robust, cast iron construction with a lifting handle. Data from the nameplate: Capacity: 45 m³/h – 45,000 liters per hour Head: 5 m Motor power P₂: 1.8 kW Power supply: three-phase 400 V Frequency: 50 Hz Rated current: 4.3 A Rotational speed: 1450 rpm Ingress protection: IP68 Operating mode: S1 – continuous operation Insulation class: F Weight: 108 kg Equipment visible in the photos: Float switch Power cord with plug and electrical module Discharge elbow with barbed connector Dksdpj Aibc Hsfx Ahhow Lifting handle The pump is used, with visible signs of wear, paint chipping, and surface corrosion. The visual condition and scope of sale are shown in the photos.

Condition: excellent (used), functionality: fully functional, For sale: Hidrostal D0DQ-S01 industrial submersible pump with a 4 kW three-phase motor, control box, float switch, and power cable. Robust construction with a ring-shaped base and a lateral discharge nozzle equipped with an elbow and quick-release coupling. Technical specifications: Dkjdpfj Aibq Tjx Ahhow Motor power: 4 kW Power supply: 380–420 V, three-phase Frequency: 50 Hz Maximum flow rate: 48 l/s, or 172.8 m³/h Maximum head: 13.5 m Performance and head parameters are provided according to the attached specification for model D0DQ-S01. Maximum values do not occur simultaneously; actual flow rate depends on the discharge head and installation resistance. Included: pump with base, control box with buttons, float switch, power cable with power plug, discharge elbow with quick-release coupling. Condition: used, with visible signs of wear, paint scratches, and localized corrosion. The scope of equipment and visual condition are shown in the photos.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 257.9 kW (350.65 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,725 kg, input voltage: 400 V, total width: 2,200 mm, total length: 3,700 mm, total height: 2,100 mm, warranty duration: 6 months, heating capacity: 265.2 kW (360.57 HP), AIRCOOLED CHILLER / HEAT PUMP CIAT ILDC 1000V 257.9 KW/265.2 KW Cooling capacity: 257.9 kW / 73.33 tons (12/7 — 35°C) Heating capacity: 265.2 kW / 75.41 tons (40/45 —7°C) Year of manufacture: 2015 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP385KCE-TWD-522 (scroll) + 2 pcs. Copeland ZP235KCE-TWD-522 (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. Hydraulic module: 2 pcs. water pump Wilo DLP65/130-4/2, expansion vessel. Dimensions: 3.7x2.2x2.1 m Weight: 2725 kg Working hours: 2/2/2/2 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Dods Aa Rfxopfx Ahhokw The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 111 kg, total length: 873 mm, total width: 470 mm, total height: 336 mm, volume flow: 129 m³/h, final pressure: 100 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 3 A, warranty duration: 12 months, The Becker KVT 3.140 is an oil-free rotary vane vacuum pump designed for industrial applications that require reliability, continuous operation, and low running costs. Thanks to its oil-free technology, the compression chamber operates without oil, ensuring a clean vacuum, reduced maintenance, and a long operational life. Key features: flow rate of 129 m³/h, ultimate vacuum of 100 mbar absolute, 4.0 kW motor, 400 V three-phase power supply – 50 Hz, air cooling. Dimensions: 873 × 470 × 336 mm, weight: 111 kg. Ideal for CNC vacuum tables, woodworking, packaging machines, vacuum handling, industrial automation, the plastics industry, and pick-and-place systems. The pump is ready for installation and requires minimal maintenance, limited primarily to checking the filters, periodically inspecting the vanes, and cleaning the cooling surfaces. Condition: New / Ex-showroom. Availability: Ready for delivery, subject to prior sale. Dkjdpfx Ajziaf Ashhjw Shipping: We can arrange shipping within Italy and abroad.

Condition: excellent (used), functionality: fully functional, For sale: an industrial KSB ETABLOC-MN 32-200/752 centrifugal pump with a 7.5 kW electric motor. It features a monobloc design with an axial suction nozzle and a vertical discharge nozzle, both equipped with flanged connections. The rated capacity is 18 m³/h, or 18,000 liters per hour, at a head of 62 m, as indicated on the pump nameplate. Pump data: Manufacturer: KSB Model: ETABLOC-MN 32-200/752 Rated capacity Q: 18 m³/h – 18,000 l/h Head H: 62 m Rotational speed according to the pump nameplate: 2940 rpm Year of manufacture: 1992 Nameplate number: 4-925-177653/1 Motor data: Power: 7.5 kW Rated voltage: 500 V, delta (Δ) connection Rated current: 11.8 A Dkjdpfxs Aibrbj Ahhjw Frequency: 50 Hz Rotational speed: 2910 rpm Protection class: IP54 Insulation class: F Power factor cos φ: 0.84

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. Dkedpfx Ahe Aibdcehow The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: like new (used), Chemical pump, slurry pump, chemical industrial centrifugal pump, used machine with explosion-proof motor Manufacturer: CEMP International -type: Bredel HOSE Pumps SP/32 -inclusion size: 1210x670x840mm -stump size: DN50 Dkedpsttvtvjfx Ahhjw -electrical data: 400V; 6.3A

Condition: like new (used), Year of construction: 2019, Sundyne HMD Kontro 1.5x1x6 Sealless Magnetic Drive Centrifugal Pump Sundyne HMD Kontro magnetic-drive centrifugal pump for industrial process and fluid-transfer applications. The sealless magnetic-drive design is intended for applications where minimising the risk of process-fluid leakage is important. Technical details - Manufacturer: Sundyne HMD Kontro - Type: Magnetic-drive centrifugal pump Djdpj Ad N Awjfx Ahhskw - Size: 1.5 × 1 × 6 - Material of construction: 316L - Condition: Brand New Suitable for consideration by chemical, pharmaceutical and general process industries, subject to the specific liquid, temperature, pressure and materials requirements. Sale details - Equipment available from Ireland - International enquiries welcome - Price: On request - Inspection and additional photographs available on request Please enquire for the full specification, condition report and quotation.

Condition: used, Hydraulic Power Unit / Pump 7.5 kW, LEESON, Used machine Dkjdps Ahxrhofx Ahhsw Manufacturer: LEESON Electric Corporation (USA) / Industrial execution Model (Motor): C132T17FZ4C (CAT. NO.: 193125.60) Condition: Used, industrial execution Overall dimensions: 920 x 300 x 360 mm Technical and operating parameters: Electric power capacity: 7.5 kW (10 HP) Supply voltage: 400 V / 200 V (3-phase, 50 Hz) Current rating: 30 A (at 200V) / 15 A (at 400V) Speed: 1450 RPM (50 Hz) Motor protection rating: IP55 Motor weight: ~79 kg