Used Dissolver Agitator for sale (106)

Condition: excellent (used), Schneider SH 07 vacuum dissolver Itedpfx Afsimgqmsvsk Ex-protected design with wall scraper Drive power 13 kW Wall scraper power 2.5 kW Speed range 380-2000 rpm Mixing tank, stainless steel, double-walled, 2 x 100 l useful capacity, 50 l heating jacket capacity Mixing tank, stainless steel, 1 x 200 l In very good condition, directly from production!!!

Condition: excellent (used), Dissolver Drais RN-PI EX-protected version Power: 6.8 kW / 0.75 kW Ijdpfx Aeh U R S Aofvetk Speed range: 0-4000 rpm Toothed disc: 20 cm In very good condition, directly from production!!!

Year of construction: 2004, condition: ready for operation (used), A Grieser pilot plant vacuum dissolver for highly viscous liquids is available. Volume: 150l, dissolver output: 22kW, vacuum pump output: 2.2kW, toothed disk diameter: 250mm, toothed disk speed: 1800rpm. Including hydraulic unit for the lifting column, hopper, sight glass with lamp, product temperature sensor, explosion-proof design and switch cabinet with inert gas flushing. Documentation available. On-site inspection is possible. Iedjucw Tpspfx Afvetk

Year of construction: 1995, condition: ready for operation (used), Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700mm, disk diameter: 400mm, tank volume: 400l, tank diameter: 785mm, tank height: 990mm, outlet diameter: 45mm. 3) Vollrath VDSVY 40, year of construction: 1991, tank volume: 400l, speed: 1000rpm, shaft length: 700mm, disk diameter: 400mm, machine dimensions X/Y/Z: approx. 3200mm/800mm/1200mm. 4) Pendraulic WDV 10, speed: 1800rpm, shaft length: 985mm, disk diameter: 275mm, lifting height: 1250mm, machine dimensions X/Z: 560mm/3450mm, weight: approx. 850kg. On-site inspection is possible. Itedpfx Aovnuckjfvek

Year of construction: 2007, condition: ready for operation (used), A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible. Itodpfx Ajvtqrxjfvjk

Condition: excellent (used), Dissolver Loher EC 10-6 Previously explosion-protected design Iodpfx Aeiu H S Tefvjtk Power: 5.2 kW

Condition: used, Year of construction: 1989, Manufacturer: Pendraulik Model : WD R 24 Type: dissolver Year: 1989 Iodpfx Afozg Nf Hjvetk   Power : 17,5 KW ATEX class : (Ex) e G3 Mixing speed : 400 – 1500 rpm Speed variation : electric Dispersion disc: Ø 300 mm Recommended vessel: Ø 700 – 1000 mm   Mounting: wall or floor standing Sold with 1 bowl (additional units available on request). Vessel clamping: manual and mechanical Total height: 3520 mm Distance between mixing head and floor: 250 mm – 1400 mm   Technical Data available

Condition: used, functionality: unexamined, machine/vehicle number: LD 50, Used Pendraulik LD 50 laboratory dissolver Iodpfexp Hw Eex Afvjtk Manufacturer: Pendraulik-Ruhrwerk Model: LD-50 Max 8,400 rpm

Condition: used, Year of construction: 1978, Manufacturer: Pendraulik Model: WRV49 Year : 1978 Type : stirrer / disolver   Atex class : EExe G3 7 Motor : BBC Power : 3,6 KW Rotation: max 1500 rpm   Wall support: manual Previous use: paint Stirring mechanism: dispersing tool Stirring head diameter: 200 mm Isdpfx Afex R Ayuevetk Agitation shaft length: 105 mm Up/down travel: 150 mm Speed variation: mechanical

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Iodpeyx Sxcsfx Afvetk Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list. Itsdpfx Afozvgiuovjk

Condition: good (used), Year of construction: 2005, Collomix Rota 30 Paint Mixer The Collomix Rota 30 is a powerful biaxial mixer designed specifically for the fast and efficient mixing of paints, varnishes, and plasters in closed containers. It is distinguished by a biaxial mixing process in which the container rotates simultaneously around two axes, enabling mixing times of under 90 seconds—even with heavy materials. Features and Ergonomics Automatic Clamping: The mixing container is automatically secured and centered immediately after insertion. Safety Features: Integrated safety door interlock and an emergency stop button; the door opens only after the mixing unit has come to a complete standstill. Handling: Equipped with retractable casters and height-adjustable machine feet for easy positioning. Durability: An integrated "Splash Guard" mechanism protects the drive components from contamination caused by leaking paint. Areas of Application The unit is primarily used in the paint wholesale and retail sectors, as well as in the chemical industry. It frequently serves as a system component within paint tinting systems to mix color pigments into base paints without lumps. Collomix Rota 30 Paint Mixer For mixing: Paints Color granules Facade paints Industrial paints Plasters Other low-viscosity materials Max. mixing weight: 35 kg Itsdpfx Aey Nxh Esfvek Rec. continuous mixing weight: 30 kg Max. container height: 60–400 mm Year of manufacture: 2005 You can find other paint mixers in various sizes—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Type : Stirrer / Dissolver Wall support: manual Previous use: paint Stirring mechanism: dispersing tool Stirring head diameter: 200 mm Stirring shaft length: 950 mm Itsdpfxex R Ayho Afvjk Up/down travel: 950 mm

Condition: good (used), Dissolver Vollrath Loher EC 10-6 Previously protected design Iedpfx Afok Dz R Novstk Power: 5.2 kW

Condition: used, Year of construction: 2004, functionality: fully functional, total height: 5,000 mm, total width: 3,100 mm, Grape fermenter with a capacity of 15 cubic meters (15 000 liters), in very good condition. It has a water jacket and an agitator with an electric motor. There are 4 units available, the price is for one piece. If you purchase more than one unit, price can be negotiated. TECHNICAL DATA: Volume: 15 m³ (15000 liters); Type: Vertical; Material: Stainless steel, food grade; Diameter: 3100 mm; Height of the body with legs: 5000 mm; Year of production: 2004; Manufacturer: PIM-Haskovo With electric motor and agitator, Power: 4.1 kW, Electrical supply: 380/220V, 50Hz, IP54 protection Built-in thermostat and temperature control panel with a water jacket. Isdpfjy It Ukox Afvetk

Year of construction: 2007, operating hours: 1,302 h, condition: excellent (used), functionality: fully functional, Putzmeister 1407 D stationary pump. Fully refurbished and renewed. Sandblasted and painted. New oil and filters. Many new parts. Like new. Ready for work. The Putzmeister BSA 1407 D is a reliable stationary concrete pump with the following specifications: Engine: diesel engine Output: Up to 71 cubic meters per hour Itsdeytcfhspfx Afvek Vertical Reach: 100 meters Horizontal Reach: 250/300 meters Maximum Pressure: 106 bar Capacity: 600 liters (Concrete hopper with agitator). This pump is designed for medium-sized construction sites and is known for its durability and efficiency. We accept barter.

Condition: good (used), 151 USED Device for: - dissolving sugar, - dissolving salt, - dissolving yeast. EQUIPMENT: - cooling/heating. EXTERNAL DIMENSIONS (in cm): - length: 80, - height: 185, - width: 100. INTERNAL DIMENSIONS (in cm): - tank diameter: 70, - height: 100, - capacity: approx. 350 L. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Itodpfx Asxfh Idjfvjk bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, Cheese vat / Pasteuriser / Process tank 350 liters. Custom engineered for a German Goat Cheese Dairy Used - Untested - Please read The Vat: - Manufacturer: Edmund Erdmann (Germany) - Year: 2004 - Completely stainless steel 1.4301 / AISI 304 - Inside: polished / outside: Glass bead blasted - Diameter inside / outside: 100 cm / 117 cm Depth inside: 49 cm - Empty weight: 850 kg (according to manual) - Double jacket (no insulation) - Hot water circulation system with built-in heating elements (8 x 4,5 kW = 36 kW) - Volume: 350 liters - Butterfly valve, DN 65 - 2-part cover - Gate-Agitator (removable) mounted on a bridge. Can be raised with a lever (see photo';s). - Agitator motor: 0,37 kW / 20 RPM - Brand: KEB - in working condition (tested) - Circulation pump: Brand: Wilo - Several (safety) sensors (cover - butterfly valve) - Magnetic valves - Temperature sensor PT100 - Custom engineered / Very solid tank and construction. Control Cabinet - 2 thermostats - Temperature recorder Isdpfjy N Dagsx Afvstk - Several switches for: - Agitator - Heating - Incubation - Circulation pump - Magnetic valve - cooling water - Heating elements (on/off) Please take a look a the photo's A German user-manual is included. IMPORTANT: This machine is sold "Untested" - "as is" This machine came from a business closure and was already disassembled when purchased. We have never assembled and tested this machine. It is very likely that several parts need to be replaced. The machine is sold as NOT Running. You will have extra costs. We did test the agitator motor and it runs. Price is based on the value of the jacketed tank. With some adjustments this tank can be heated with an external heating. The vat comes with a lot of cable. Some of these cables are damaged. The control cabinet used to be "built in" a wall. The vat comes with a manual and parts-list.

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. Isdpfx Aezdtfljfvetk The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. Ijdpfx Aozcf Dljfvjtk The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Mash and wort kettle inner diameter approx.: 1000 mm Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Frequency: 50 Hz Operation / Control: “Braupilot” HMI control via touch screen Material: Stainless steel 1.4301 Iodpfxoztwz As Afvstk Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V Itodpfx Aezgwzvofvjk - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: used, mileage: 1 km, power: 18 kW (24.47 HP), gearing type: mechanical, fuel type: diesel, color: red, empty load weight: 1,400 kg, first registration: 08/1954, Year of construction: 1954, total length: 2,400 mm, total width: 1,430 mm, total height: 1,250 mm, front tire size: 5.50-16AS, rear tire size: 11,2x24, driver cabin: other, Vehicle location: Bovenden Isdpjvhhy Nofx Afvjtk It was extensively and faithfully restored to its original condition at considerable expense and signed by Lamborghini. The vehicle comes from a large collection that was dissolved for health reasons. The DL 25 was one of Lamborghini’s most popular water-cooled tractors. The 2-cylinder engine was manufactured by MWM and then sold to Lamborghini Trattori in 1955. It was produced between 1952 and 1960 in 916 units, and approximately 200 units are known to still exist today. The diesel engine has a displacement of 1750 cm³ and produces 24 hp, with a 4-speed plus reverse gearbox for a top speed of 16 km/h. In 1954, it cost 1,400,000 Lire. This model of the MWM or Lamborghini engine is considered to be the tractor that put Lamborghini on the map and brought him the wealth to become a customer of Ferrari and start the history of Lamborghini Automobili. Artcurial Sale Rétromobile 2017 - Lot 76 Sold for €35,760 Accessories information is provided without guarantee; subject to changes, prior sale and errors!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Iodpfxozht Sms Afvetk Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Iedpfxjzb Dp Rs Afvstk Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.